Hi Linda and all,
Thanks for your reply.
We didn't receive your reply via mail and we found the below when we
searched in archive file.
What version of xCAT are you running:
lsxcatd -aAdvertising
If xcatd is responding to other commands (lsdef, etc.), try stopping and
restarting the xcatd daemon, and see if any errors show up in your syslog.
Not sure exactly how this is done on zvm. On linux it is:
service xcatd stop
ps -ef | grep -i xcat ### to make sure no hung processes
service xcatd start
tail /var/log/messages
If all of that is correct, try running the command in bypass mode to see
if
there are any plugin loading errors:
XCATBYPASS=yes nodeset gpok3 install
Linda
Please find the updates on the above advice
linux-n0ut:~ # lsxcatd -a
Version 2.7.6 (svn r14451, built Tue Nov 27 21:57:27 EST 2012)
This is a Management Node
dbengine=SQLite
linux-n0ut:~ # lsdef linux-ssd6
Object name: linux-ssd6
appstatus=xend=down,sshd=up,rdp=down,pbs=down,msrpc=down
appstatustime=01-01-2014 11:27:10
arch=s390x
groups=all
hcp=linux-ssd6.site
hostnames=linux-ssd6.site
ip=xxx.xx.xxx.xx ( we received the correct ip)
mgt=zvm
nodetype=vm
os=sles11-sp1
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles
status=ping
statustime=12-18-2013 17:47:52
usercomment=zHCP for this environment runs in this image !
userid=zhcp
linux-n0ut:~ # service xcatd stop
Stopping xCATd done
linux-n0ut:~ # ps -ef | grep -i xcat
root 1828 1 0 2013 ? 00:00:00 /usr/sbin/in.tftpd -v -l
-s /tft pboot -m /etc/tftpmapfile4xcat.conf
wwwrun 4172 1 0 2013 ? 00:05:25 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
wwwrun 4234 1 0 2013 ? 00:02:22 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
wwwrun 4316 1 0 2013 ? 00:02:18 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
wwwrun 5174 1 0 2013 ? 00:00:32 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
wwwrun 10321 1 0 Jan01 ? 00:00:17 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
root 15557 15372 0 16:46 pts/1 00:00:00 grep -i xcat
wwwrun 27147 1 0 2013 ? 00:01:03 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
wwwrun 27203 1 0 2013 ? 00:00:58 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
wwwrun 27265 1 0 2013 ? 00:01:02 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
wwwrun 27326 1 0 2013 ? 00:01:00 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
wwwrun 27334 1 0 2013 ? 00:00:56 python
/opt/xcat/ui/lib/ajaxterm /ajaxterm.py
linux-n0ut:~ # ps -ef | grep -i xcat
root 1828 1 0 2013 ? 00:00:00 /usr/sbin/in.tftpd -v -l
-s /tftpboot -m /etc/tftpmapfile4xcat.conf
wwwrun 4172 1 0 2013 ? 00:05:25 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
wwwrun 4234 1 0 2013 ? 00:02:22 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
wwwrun 4316 1 0 2013 ? 00:02:18 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
wwwrun 5174 1 0 2013 ? 00:00:32 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
wwwrun 10321 1 0 Jan01 ? 00:00:17 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
root 15559 15372 0 16:46 pts/1 00:00:00 grep -i xcat
wwwrun 27147 1 0 2013 ? 00:01:03 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
wwwrun 27203 1 0 2013 ? 00:00:58 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
wwwrun 27265 1 0 2013 ? 00:01:02 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
wwwrun 27326 1 0 2013 ? 00:01:00 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
wwwrun 27334 1 0 2013 ? 00:00:56 python
/opt/xcat/ui/lib/ajaxterm/ajaxterm.py
linux-n0ut:~ # service xcatd start
Starting xCATd
done
linux-n0ut:~ # tail /var/log/messages
Jan 3 16:45:31 linux-n0ut /usr/sbin/gmetad[1540]: data_thread() got no
answer from any [linux-n0ut] datasource
Jan 3 16:45:50 linux-n0ut /usr/sbin/gmetad[1540]: data_thread() got no
answer from any [linux-n0ut] datasource
Jan 3 16:45:54 linux-n0ut xCAT: xCAT: Allowing lsdef linux-ssd6 for root
from localhost
Jan 3 16:46:06 linux-n0ut /usr/sbin/gmetad[1540]: data_thread() got no
answer from any [linux-n0ut] datasource
Jan 3 16:46:20 linux-n0ut /usr/sbin/gmetad[1540]: data_thread() got no
answer from any [linux-n0ut] datasource
Jan 3 16:46:34 linux-n0ut /usr/sbin/gmetad[1540]: data_thread() got no
answer from any [linux-n0ut] datasource
Jan 3 16:46:47 linux-n0ut /usr/sbin/gmetad[1540]: data_thread() got no
answer from any [linux-n0ut] datasource
Jan 3 16:47:06 linux-n0ut /usr/sbin/gmetad[1540]: data_thread() got no
answer from any [linux-n0ut] datasource
Jan 3 16:47:25 linux-n0ut /usr/sbin/gmetad[1540]: data_thread() got no
answer from any [linux-n0ut] datasource
Jan 3 16:47:27 linux-n0ut xCAT: [mon]: gangliamon: 0 started on
linux-n0ut
linux-n0ut:~ # XCATBYPASS=yes nodeset gpok3 install
snkey=127.0.0.2, nodes=gpok3
Can't locate object method "get_site_attribute" via package
"xCAT::TableUtils" (perhaps you forgot to load "xCAT::TableUtils"?) at
/opt/xcat/lib/perl/xCAT_plugin/zvm.pm line 3673.
Kindly share your expertise thoughts on this and thanks once again for
your support.
Thanks and Regards,
S.Gokulakrishnan
Corporate TEG - IBM Centre Of Excellence
Tata Consultancy Services
Extn - 044-67422375
Email - [email protected]
Website : http://www.tcs.com
________________________________________
From:
S Gokulakrishnan1/CHN/TCS
To:
[email protected]
Cc:
Chuck Brazie/Endicott/IBM@IBMUS
Date:
12/31/2013 05:04 PM
Subject:
Reg error in executing nodeset command
Dear Team,
We have installed xcat in our z/VM environment.
Thanks for the user group support specially earlier form Chuck Brazie and
Thang Pham.
While installing suse linux image using auto yast we are facing the below
error while executing nodeset command
# nodeset gpok3 install
Error: zvm plugin bug, pid 8102, process description: 'xCATd SSL: nodeset
to gpok3 for root@localhost: zvm instance' with error 'Can't locate object
method "get_site_attribute" via package "xCAT::TableUtils" (perhaps you
forgot to load "xCAT::TableUtils"?) at
/opt/xcat/lib/perl/xCAT_plugin/zvm.pm line 3673, <$readpipe> line 862.
' while trying to fulfill request for the following nodes: gpok3
Kindly request you to share your expertise in overcoming this issue.
Thanks and Regards,
S.Gokulakrishnan
Corporate TEG - IBM Centre Of Excellence
Tata Consultancy Services
Extn - 044-67422375
Email - [email protected]
Website : http://www.tcs.com
________________________________________
=====-----=====-----=====
Notice: The information contained in this e-mail
message and/or attachments to it may contain
confidential or privileged information. If you are
not the intended recipient, any dissemination, use,
review, distribution, printing or copying of the
information contained in this e-mail message
and/or attachments to it are strictly prohibited. If
you have received this communication in error,
please notify us by reply e-mail or telephone and
immediately and permanently delete the message
and any attachments. Thank you
------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349831&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
