Could it be the noarch packages being used (as shown in my yum output)?
On Mon, Jan 27, 2014 at 9:34 AM, Josh Nielsen <[email protected]>wrote: > Yes, I read that on the bug report but mine is already set to that, and > that is only useful if the repo has the files needed. If it is > perl-NET-SSLeay then even pointing it to xcat-dep/rh6/x86_64 won't help > since it isn't present. > > Here are my yum repos: > > /etc/yum.repos.d/xCAT-otherpkgs0.repo: > [xcat-otherpkgs0] > name=xcat-otherpkgs0 > baseurl=http://10.20.0.1/install/post/otherpkgs/centos6.4/x86_64/. > enabled=1 > gpgcheck=0 > > /etc/yum.repos.d/xCAT-otherpkgs1.repo: > [xcat-otherpkgs1] > name=xcat-otherpkgs1 > baseurl= > http://10.20.0.1/install/post/otherpkgs/centos6.4/x86_64/xcat/xcat-core > enabled=1 > gpgcheck=0 > > /etc/yum.repos.d/xCAT-otherpkgs2.repo: > [xcat-otherpkgs2] > name=xcat-otherpkgs2 > baseurl= > http://10.20.0.1/install/post/otherpkgs/centos6.4/x86_64/xcat/xcat-dep/rh6/x86_64 > enabled=1 > gpgcheck=0 > > I decided to remove the xCAT-otherpkgs0.repo, just in case it was > interfering, then uninstall all xCAT packages, and reinstall them but it > still has the same problem after all that. Here were the yum packages > grabbed for the install: > > Dependencies Resolved > > > ======================================================================================================================================================================== > Package Arch > Version Repository > Size > > ======================================================================================================================================================================== > Installing: > conserver-xcat x86_64 > 8.1.16-10 xcat-otherpkgs2 > 218 k > cpio x86_64 > 2.11-20 xcat-otherpkgs2 > 252 k > elilo-xcat noarch > 3.14-4 xcat-otherpkgs2 > 75 k > ipmitool-xcat x86_64 > 1.8.11-3 xcat-otherpkgs2 > 244 k > perl-IO-Stty noarch > 0.03-1 xcat-otherpkgs2 > 12 k > perl-xCAT noarch > 4:2.8.3-snap201311122316 xcat-otherpkgs1 > 665 k > syslinux-xcat noarch > 3.86-2 xcat-otherpkgs2 > 498 k > xCAT-client noarch > 4:2.8.3-snap201311122316 xcat-otherpkgs1 > 531 k > xCATsn x86_64 > 4:2.8.3-snap201311122318 xcat-otherpkgs1 > 24 k > Installing for dependencies: > dhcp x86_64 > 12:4.1.1-34.P1.el6.centos > local-centos6.4-x86_64-x86_64 816 k > httpd x86_64 > 2.2.15-26.el6.centos > local-centos6.4-x86_64-x86_64 821 k > initscripts x86_64 > 9.03.38-1.el6.centos > local-centos6.4-x86_64-x86_64 937 k > iproute x86_64 > 2.6.32-23.el6 > local-centos6.4-x86_64-x86_64 344 k > iptables x86_64 > 1.4.7-9.el6 > local-centos6.4-x86_64-x86_64 251 k > iputils x86_64 > 20071127-16.el6 > local-centos6.4-x86_64-x86_64 120 k > nfs-utils x86_64 > 1:1.2.3-36.el6 > local-centos6.4-x86_64-x86_64 319 k > nfs-utils-lib x86_64 > 1.1.5-6.el6 > local-centos6.4-x86_64-x86_64 67 k > openssh x86_64 > 5.3p1-84.1.el6 > local-centos6.4-x86_64-x86_64 236 k > openssh-clients x86_64 > 5.3p1-84.1.el6 > local-centos6.4-x86_64-x86_64 355 k > perl-Net-SSLeay x86_64 > 1.35-9.el6 > local-centos6.4-x86_64-x86_64 173 k > policycoreutils x86_64 > 2.0.83-19.30.el6 > local-centos6.4-x86_64-x86_64 646 k > tftp-server x86_64 > 0.49-7.el6 > local-centos6.4-x86_64-x86_64 39 k > udev x86_64 > 147-2.46.el6 > local-centos6.4-x86_64-x86_64 347 k > util-linux-ng x86_64 > 2.17.2-12.9.el6 > local-centos6.4-x86_64-x86_64 1.5 M > xCAT-server noarch > 4:2.8.3-snap201311122316 xcat-otherpkgs1 > 1.6 M > xinetd x86_64 > 2:2.3.14-38.el6 > local-centos6.4-x86_64-x86_64 121 k > > > A restart of the 'xcatd' service yielded this (including a lot of > conserver and syslog errors I'll have to fix later): > > > #service xcatd restart > Restarting xCATd Can't locate object method "start_SSL" via package > "IO::Socket::SSL" at /opt/xcat/lib/perl/xCAT/Client.pm line 222. > Stopping xCATd [ OK ] > Error loading module /opt/xcat/lib/perl/xCAT_plugin/rhevm.pm ...skipping > Unable to log Error loading module /opt/xcat/lib/perl/xCAT_plugin/rhevm.pm > ...skipping to syslog because of no connection to syslog available > - getservbyname failed for syslog/tcp and syslogng/tcp > - /dev/log is not a socket > - stream /dev/log is not writable at /opt/xcat/lib/perl/xCAT/MsgUtils.pm > line 463 > > Error: Nodeset was run with a noderange containing both service nodes and > compute nodes. This is not valid. You must submit with either compute nodes > in the noderange or service nodes. > > conserver not running, not stopping [PASSED] > Starting conserver: [Mon Jan 27 03:25:32 2014] conserver (17886): > conserver.com version 8.1.16 > [Mon Jan 27 03:25:32 2014] conserver (17886): started as `root' by `root' > [Mon Jan 27 03:25:32 2014] conserver (17886): ERROR: no consoles found in > configuration file > [Mon Jan 27 03:25:32 2014] conserver (17886): terminated > [FAILED] > Error on command: service conserver start > > Unable to log Error on command: service conserver start > to syslog because of no connection to syslog available > - getservbyname failed for syslog/tcp and syslogng/tcp > - /dev/log is not a socket > - stream /dev/log is not writable at /opt/xcat/lib/perl/xCAT/MsgUtils.pm > line 463 > > Stopping named: [ OK ] > Starting named: [ OK ] > named has been enabled on boot. > Unable to log named has been enabled on boot. to syslog because of no > connection to syslog available > - getservbyname failed for syslog/tcp and syslogng/tcp > - /dev/log is not a socket > - stream /dev/log is not writable at /opt/xcat/lib/perl/xCAT/MsgUtils.pm > line 463 > > Shutting down NFS daemon: [ OK ] > Shutting down NFS mountd: [ OK ] > Shutting down NFS services: [ OK ] > Starting NFS services: [ OK ] > Starting NFS mountd: [ OK ] > Starting NFS daemon: [ OK ] > Stopping httpd: [ OK ] > Starting httpd: [ OK ] > Renamed existing dhcp configuration file to /etc/dhcp/dhcpd.conf.xcatbak > > Shutting down dhcpd: [ OK ] > Starting dhcpd: [ OK ] > Shutting down dhcpd: [ OK ] > Starting dhcpd: [ OK ] > [ OK ] > > As you can see though the start_SSL problem still exists. Any further > pointers would be helpful. > > Thanks, > Josh > > > > On Mon, Jan 27, 2014 at 8:46 AM, Lissa Valletta <[email protected]> wrote: > >> In that defect there is also a post for Centos 6.4 from Vadim "I have >> the exact same issue on CentOS 6.4 with the fresh install of 2.8.2 using >> the latest xcat-dep package for Linux" Please check what they did and >> see if it helps you. >> >> Resolved by setting local xcat-dep repo to point to xcat-dep/rh6/x86_64 >> instead of just to xcat-dep >> >> Lissa K. Valletta >> 8-3/B10 >> Poughkeepsie, NY 12601 >> (tie 293) 433-3102 >> >> >> >> [image: Inactive hide details for Josh Nielsen ---01/24/2014 04:49:30 >> PM---Now that I've installed my Service Node there is an issue qu]Josh >> Nielsen ---01/24/2014 04:49:30 PM---Now that I've installed my Service Node >> there is an issue querying the Management Node's database be >> >> From: Josh Nielsen <[email protected]> >> To: xCAT Users Mailing list <[email protected]>, >> Date: 01/24/2014 04:49 PM >> Subject: [xcat-user] xCAT start_SSL Bug? >> ------------------------------ >> >> >> >> Now that I've installed my Service Node there is an issue querying the >> Management Node's database because of an SSL related error. If I turn >> on XCATBYPASS=1 however for testing it grabs the database information >> with 'tabdump' from the MN fine (which I imagine must turn off SSL >> else it would encounter the same error). The error that I am seeing is >> the same as reported in this xCAT Bug Report: >> http://sourceforge.net/p/xcat/bugs/3874/. >> >> # lsxcatd -d >> Can't locate object method "start_SSL" via package "IO::Socket::SSL" >> at /opt/xcat/lib/perl/xCAT/Client.pm line 222. >> >> That bug report was for AIX but it looks like the fix was for >> perl-NET-SSLeay to be rebuilt: >> "Xiao Peng updated the problem rpm on dave's mgmt node to >> Net-SSLeay-1.55-3, which was built with newer source code and on aix >> 71L." >> >> I have Centos 6.4: >> # uname -a >> Linux xcat-serv1 2.6.32-358.el6.x86_64 #1 SMP Fri Feb 22 00:31:26 UTC >> 2013 x86_64 x86_64 x86_64 GNU/Linux >> >> However, the perl-NET-SSLeay package does not seem to be present in >> xcat-dep for xCAT 2.8.3. I have a version of it already installed but >> it came from the Centos repo: >> >> perl-Net-SSLeay.x86_64 1.35-9.el6 installed >> >> The only perl files I see in xcat/xcat-dep/rh6/x86_64 are: >> >> perl-AppConfig-1.52-4.noarch.rpm >> perl-Crypt-CBC-2.29-3.el6.noarch.rpm >> perl-Crypt-Rijndael-1.09-2.el6.x86_64.rpm >> perl-Expect-1.21-1.noarch.rpm >> perl-IO-Stty-0.03-1.noarch.rpm >> perl-IO-Tty-1.07-1.x86_64.rpm >> perl-JSON-2.50-1.el6.rfx.noarch.rpm >> perl-SOAP-Lite-0.710.08-1.noarch.rpm >> perl-XML-Simple-2.18-1.noarch.rpm >> >> Is it the version of perl-NET-SSLeay? >> >> Thanks, >> Josh >> >> >> ------------------------------------------------------------------------------ >> CenturyLink Cloud: The Leader in Enterprise Cloud Services. >> Learn Why More Businesses Are Choosing CenturyLink Cloud For >> Critical Workloads, Development Environments & Everything In Between. >> Get a Quote or Start a Free Trial Today. >> >> http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk >> _______________________________________________ >> xCAT-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/xcat-user >> >> >> >> >> ------------------------------------------------------------------------------ >> CenturyLink Cloud: The Leader in Enterprise Cloud Services. >> Learn Why More Businesses Are Choosing CenturyLink Cloud For >> Critical Workloads, Development Environments & Everything In Between. >> Get a Quote or Start a Free Trial Today. >> >> http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk >> _______________________________________________ >> xCAT-user mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/xcat-user >> >> >
<<graycol.gif>>
------------------------------------------------------------------------------ CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments & Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
