Running in XCATBYPASS mode only stops you from using the daemon which stops the SSL Credential use, which is why you do not get errors in XCATBYPASS.
Is you MN Centos 6.4? I would run rpm -qa | grep -i ssl and see what perl ssl rpms are installed. Do the same on the SErvice node. My service node has these for Redhat. openssl098e-0.9.8e-17.el6_2.2.ppc64 perl-Net-SSLeay-1.35-9.el6.ppc64 openssl-1.0.0-20.el6_2.5.ppc64 openssl098e-0.9.8e-17.el6_2.2.ppc perl-IO-Socket-SSL-1.31-2.el6.noarch perl-Crypt-SSLeay-0.57-16.el6.ppc64 Lissa K. Valletta 8-3/B10 Poughkeepsie, NY 12601 (tie 293) 433-3102 From: Josh Nielsen <[email protected]> To: xCAT Users Mailing list <[email protected]>, Date: 01/27/2014 10:36 AM Subject: Re: [xcat-user] xCAT start_SSL Bug? Yes, I read that on the bug report but mine is already set to that, and that is only useful if the repo has the files needed. If it is perl-NET-SSLeay then even pointing it to xcat-dep/rh6/x86_64 won't help since it isn't present. Here are my yum repos: /etc/yum.repos.d/xCAT-otherpkgs0.repo: [xcat-otherpkgs0] name=xcat-otherpkgs0 baseurl=http://10.20.0.1/install/post/otherpkgs/centos6.4/x86_64/. enabled=1 gpgcheck=0 /etc/yum.repos.d/xCAT-otherpkgs1.repo: [xcat-otherpkgs1] name=xcat-otherpkgs1 baseurl= http://10.20.0.1/install/post/otherpkgs/centos6.4/x86_64/xcat/xcat-core enabled=1 gpgcheck=0 /etc/yum.repos.d/xCAT-otherpkgs2.repo: [xcat-otherpkgs2] name=xcat-otherpkgs2 baseurl= http://10.20.0.1/install/post/otherpkgs/centos6.4/x86_64/xcat/xcat-dep/rh6/x86_64 enabled=1 gpgcheck=0 I decided to remove the xCAT-otherpkgs0.repo, just in case it was interfering, then uninstall all xCAT packages, and reinstall them but it still has the same problem after all that. Here were the yum packages grabbed for the install: Dependencies Resolved ======================================================================================================================================================================== Package Arch Version Repository Size ======================================================================================================================================================================== Installing: conserver-xcat x86_64 8.1.16-10 xcat-otherpkgs2 218 k cpio x86_64 2.11-20 xcat-otherpkgs2 252 k elilo-xcat noarch 3.14-4 xcat-otherpkgs2 75 k ipmitool-xcat x86_64 1.8.11-3 xcat-otherpkgs2 244 k perl-IO-Stty noarch 0.03-1 xcat-otherpkgs2 12 k perl-xCAT noarch 4:2.8.3-snap201311122316 xcat-otherpkgs1 665 k syslinux-xcat noarch 3.86-2 xcat-otherpkgs2 498 k xCAT-client noarch 4:2.8.3-snap201311122316 xcat-otherpkgs1 531 k xCATsn x86_64 4:2.8.3-snap201311122318 xcat-otherpkgs1 24 k Installing for dependencies: dhcp x86_64 12:4.1.1-34.P1.el6.centos local-centos6.4-x86_64-x86_64 816 k httpd x86_64 2.2.15-26.el6.centos local-centos6.4-x86_64-x86_64 821 k initscripts x86_64 9.03.38-1.el6.centos local-centos6.4-x86_64-x86_64 937 k iproute x86_64 2.6.32-23.el6 local-centos6.4-x86_64-x86_64 344 k iptables x86_64 1.4.7-9.el6 local-centos6.4-x86_64-x86_64 251 k iputils x86_64 20071127-16.el6 local-centos6.4-x86_64-x86_64 120 k nfs-utils x86_64 1:1.2.3-36.el6 local-centos6.4-x86_64-x86_64 319 k nfs-utils-lib x86_64 1.1.5-6.el6 local-centos6.4-x86_64-x86_64 67 k openssh x86_64 5.3p1-84.1.el6 local-centos6.4-x86_64-x86_64 236 k openssh-clients x86_64 5.3p1-84.1.el6 local-centos6.4-x86_64-x86_64 355 k perl-Net-SSLeay x86_64 1.35-9.el6 local-centos6.4-x86_64-x86_64 173 k policycoreutils x86_64 2.0.83-19.30.el6 local-centos6.4-x86_64-x86_64 646 k tftp-server x86_64 0.49-7.el6 local-centos6.4-x86_64-x86_64 39 k udev x86_64 147-2.46.el6 local-centos6.4-x86_64-x86_64 347 k util-linux-ng x86_64 2.17.2-12.9.el6 local-centos6.4-x86_64-x86_64 1.5 M xCAT-server noarch 4:2.8.3-snap201311122316 xcat-otherpkgs1 1.6 M xinetd x86_64 2:2.3.14-38.el6 local-centos6.4-x86_64-x86_64 121 k A restart of the 'xcatd' service yielded this (including a lot of conserver and syslog errors I'll have to fix later): #service xcatd restart Restarting xCATd Can't locate object method "start_SSL" via package "IO::Socket::SSL" at /opt/xcat/lib/perl/xCAT/Client.pm line 222. Stopping xCATd [ OK ] Error loading module /opt/xcat/lib/perl/xCAT_plugin/rhevm.pm ...skipping Unable to log Error loading module /opt/xcat/lib/perl/xCAT_plugin/rhevm.pm ...skipping to syslog because of no connection to syslog available - getservbyname failed for syslog/tcp and syslogng/tcp - /dev/log is not a socket - stream /dev/log is not writable at /opt/xcat/lib/perl/xCAT/MsgUtils.pm line 463 Error: Nodeset was run with a noderange containing both service nodes and compute nodes. This is not valid. You must submit with either compute nodes in the noderange or service nodes. conserver not running, not stopping [PASSED] Starting conserver: [Mon Jan 27 03:25:32 2014] conserver (17886): conserver.com version 8.1.16 [Mon Jan 27 03:25:32 2014] conserver (17886): started as `root' by `root' [Mon Jan 27 03:25:32 2014] conserver (17886): ERROR: no consoles found in configuration file [Mon Jan 27 03:25:32 2014] conserver (17886): terminated [FAILED] Error on command: service conserver start Unable to log Error on command: service conserver start to syslog because of no connection to syslog available - getservbyname failed for syslog/tcp and syslogng/tcp - /dev/log is not a socket - stream /dev/log is not writable at /opt/xcat/lib/perl/xCAT/MsgUtils.pm line 463 Stopping named: [ OK ] Starting named: [ OK ] named has been enabled on boot. Unable to log named has been enabled on boot. to syslog because of no connection to syslog available - getservbyname failed for syslog/tcp and syslogng/tcp - /dev/log is not a socket - stream /dev/log is not writable at /opt/xcat/lib/perl/xCAT/MsgUtils.pm line 463 Shutting down NFS daemon: [ OK ] Shutting down NFS mountd: [ OK ] Shutting down NFS services: [ OK ] Starting NFS services: [ OK ] Starting NFS mountd: [ OK ] Starting NFS daemon: [ OK ] Stopping httpd: [ OK ] Starting httpd: [ OK ] Renamed existing dhcp configuration file to /etc/dhcp/dhcpd.conf.xcatbak Shutting down dhcpd: [ OK ] Starting dhcpd: [ OK ] Shutting down dhcpd: [ OK ] Starting dhcpd: [ OK ] [ OK ] As you can see though the start_SSL problem still exists. Any further pointers would be helpful. Thanks, Josh On Mon, Jan 27, 2014 at 8:46 AM, Lissa Valletta <[email protected]> wrote: In that defect there is also a post for Centos 6.4 from Vadim "I have the exact same issue on CentOS 6.4 with the fresh install of 2.8.2 using the latest xcat-dep package for Linux" Please check what they did and see if it helps you. Resolved by setting local xcat-dep repo to point to xcat-dep/rh6/x86_64 instead of just to xcat-dep Lissa K. Valletta 8-3/B10 Poughkeepsie, NY 12601 (tie 293) 433-3102 Inactive hide details for Josh Nielsen ---01/24/2014 04:49:30 PM---Now that I've installed my Service Node there is an issue quJosh Nielsen ---01/24/2014 04:49:30 PM---Now that I've installed my Service Node there is an issue querying the Management Node's database be From: Josh Nielsen <[email protected]> To: xCAT Users Mailing list <[email protected]>, Date: 01/24/2014 04:49 PM Subject: [xcat-user] xCAT start_SSL Bug? Now that I've installed my Service Node there is an issue querying the Management Node's database because of an SSL related error. If I turn on XCATBYPASS=1 however for testing it grabs the database information with 'tabdump' from the MN fine (which I imagine must turn off SSL else it would encounter the same error). The error that I am seeing is the same as reported in this xCAT Bug Report: http://sourceforge.net/p/xcat/bugs/3874/. # lsxcatd -d Can't locate object method "start_SSL" via package "IO::Socket::SSL" at /opt/xcat/lib/perl/xCAT/Client.pm line 222. That bug report was for AIX but it looks like the fix was for perl-NET-SSLeay to be rebuilt: "Xiao Peng updated the problem rpm on dave's mgmt node to Net-SSLeay-1.55-3, which was built with newer source code and on aix 71L." I have Centos 6.4: # uname -a Linux xcat-serv1 2.6.32-358.el6.x86_64 #1 SMP Fri Feb 22 00:31:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux However, the perl-NET-SSLeay package does not seem to be present in xcat-dep for xCAT 2.8.3. I have a version of it already installed but it came from the Centos repo: perl-Net-SSLeay.x86_64 1.35-9.el6 installed The only perl files I see in xcat/xcat-dep/rh6/x86_64 are: perl-AppConfig-1.52-4.noarch.rpm perl-Crypt-CBC-2.29-3.el6.noarch.rpm perl-Crypt-Rijndael-1.09-2.el6.x86_64.rpm perl-Expect-1.21-1.noarch.rpm perl-IO-Stty-0.03-1.noarch.rpm perl-IO-Tty-1.07-1.x86_64.rpm perl-JSON-2.50-1.el6.rfx.noarch.rpm perl-SOAP-Lite-0.710.08-1.noarch.rpm perl-XML-Simple-2.18-1.noarch.rpm Is it the version of perl-NET-SSLeay? Thanks, Josh ------------------------------------------------------------------------------ CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments & Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments & Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments & Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
------------------------------------------------------------------------------ CenturyLink Cloud: The Leader in Enterprise Cloud Services. Learn Why More Businesses Are Choosing CenturyLink Cloud For Critical Workloads, Development Environments & Everything In Between. Get a Quote or Start a Free Trial Today. http://pubads.g.doubleclick.net/gampad/clk?id=119420431&iu=/4140/ostg.clktrk
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
