Thanks Linda. No luck yet though.
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
[email protected]
On Wed, Jul 16, 2014 at 12:01 PM, Linda Mellor <[email protected]> wrote:
> Lanae -
> I took a closer look at your screenshot to see if I could find any clues.
> First, were you able to install this node before your xCAT upgrade, so
> you know that your node definition is correct? Specifically, do you have
> the correct MAC address for your eth2, and that nic is the one that is
> connected to your xCAT management network?
>
> If that is the correct mac, a couple of setting changes you might try:
>
> chdef node1879 installnic=mac primarynic=mac interface=""
>
>
> (that is the literal string 'mac', not the actual mac address)
>
> Then a new nodeset/reboot or rinstall, whichever you were previously using.
>
> Linda
>
>
>
> [image: Inactive hide details for Lanae Neild ---07/15/2014 01:52:18
> PM---Thanks Lissa, we've tried that though. Still stumped on this]Lanae
> Neild ---07/15/2014 01:52:18 PM---Thanks Lissa, we've tried that though.
> Still stumped on this error. Lanae Neild
>
>
> From: Lanae Neild <[email protected]>
> To: xCAT Users Mailing list <[email protected]>
> Date: 07/15/2014 01:52 PM
>
> Subject: Re: [xcat-user] dhcp xcat error
> ------------------------------
>
>
>
> Thanks Lissa, we've tried that though. Still stumped on this error.
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> (864)505-4293
> *[email protected]* <[email protected]>
>
>
>
>
>
> On Tue, Jul 15, 2014 at 11:40 AM, Lissa Valletta <*[email protected]*
> <[email protected]>> wrote:
>
> Might also run makedhcp -a or makedhcp -d node1879 and makedhcp
> node1879 to remove the one node and add it.
>
> You can also run makedhcp -q node1879 to look at it's definition
>
> see man makedhcp
>
>
>
> Lissa K. Valletta
> 8-3/B10
> Poughkeepsie, NY 12601
> (tie 293) 433-3102
>
>
>
> [image: Inactive hide details for Lanae Neild ---07/15/2014 10:35:43
> AM---Thank you Jonathan, I didn't find that email thread either. A]Lanae
> Neild ---07/15/2014 10:35:43 AM---Thank you Jonathan, I didn't find that
> email thread either. At least not specific to both dhcp and u
>
>
> From: Lanae Neild <*[email protected]* <[email protected]>>
> To: xCAT Users Mailing list <*[email protected]*
> <[email protected]>>,
> Date: 07/15/2014 10:35 AM
>
> Subject: Re: [xcat-user] dhcp xcat error
> ------------------------------
>
>
>
>
> Thank you Jonathan, I didn't find that email thread either. At least
> not specific to both dhcp and upgrading to 2.8.4.
>
> We tried recreating the dhcp config file using makedhcp -n but that
> didn't work.
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> *(864)505-4293* <%28864%29505-4293>
> *[email protected]* <[email protected]>
>
>
>
>
>
> On Tue, Jul 15, 2014 at 4:26 AM, Jonathan Hermann <
> *[email protected]* <[email protected]>> wrote:
>
> Lanae,
>
> I remember that only a few weeks ago another user had DHCP problems
> after
> upgrading to 2.8.4. For him it worked to just recreate the DHCP
> config by
> running makedhcp with the respective arguments. I did not find that
> mail on
> the fly, but you should be able to retrieve it from the xcat
> mailing list
> archive.
>
> [Please mind that I'm not official xcat support - only a user
> myself and
> following the list.]
>
>
>
> Mit freundlichen Grüßen / Kind regards
>
>
>
>
> Jonathan Hermann
>
>
>
> IT Specialist HPC and HPSS
>
> Global Technology Services / Data Center Services
>
>
>
> --------------------------------------------------------------------------
> -----------------------------------------------------------------
>
> IBM Deutschland
>
> IBM-Allee 1
>
> 71139 Ehningen
>
> Phone: *+49-160-98976942* <%2B49-160-98976942>
>
> E-Mail: *[email protected]* <[email protected]>
>
>
>
> --------------------------------------------------------------------------
> -----------------------------------------------------------------
>
> IBM Deutschland Infrastructure Technology Services GmbH /
> Geschäftsführung: Hendrik Meyer
> Sitz der Gesellschaft: Ehningen / Registergericht: Amtsgericht
> Stuttgart,
> HRB 727973
>
>
>
>
>
>
>
> From: Lanae Neild <*[email protected]* <[email protected]>>
> To: xCAT Users Mailing list <*[email protected]*
> <[email protected]>>
> Date: 14.07.2014 20:04
> Subject: Re: [xcat-user] dhcp xcat error
>
>
>
> Yes, we have many nodes working that have primarynic=eth2, only a
> few don't
> work.
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> *(864)505-4293* <%28864%29505-4293>
> *[email protected]* <[email protected]>
>
>
>
>
>
> On Mon, Jul 14, 2014 at 12:06 PM, Lissa Valletta <
> *[email protected]* <[email protected]>> wrote:
>
>
> Were any of the nodes that worked also have defined the
> primary
> nic=eth2
>
>
>
> Lissa K. Valletta
> 8-3/B10
> Poughkeepsie, NY 12601
> (tie 293) 433-3102
>
>
>
> (Embedded image moved to file: pic28576.gif)Inactive hide
> details for
> Lanae Neild ---07/14/2014 11:25:57 AM---Someone tried to
> rinstall a
> node and sent me this screenshot Lanae Neild ---07/14/2014
> 11:25:57
> AM---Someone tried to rinstall a node and sent me this
> screenshot
> from the node's console. I recently upg
>
> From: Lanae Neild <*[email protected]* <[email protected]>>
> To: xCAT Users Mailing list <*[email protected]*
> <[email protected]>>,
> Date: 07/14/2014 11:25 AM
> Subject: [xcat-user] dhcp xcat error
>
>
>
>
>
>
> Someone tried to rinstall a node and sent me this screenshot
> from the
> node's console. I recently upgraded xCAT from 2.7x to 2.8.4.
> We use
> only diskful installs and Scientific Linux. I don't think
> this is
> caused by the upgrade though, I've tested other nodes
> rinstall fine.
> As for the upgrade, I have our osimage definitions set up,
> but not
> converted provmethod to the osimages yet.
>
> I looked up the messages in the screenshot, but not making
> sense of
> it. Any tips would be greatly appreciated, for where to look
> within
> xcat for the cause of this DHCP/xCAT issue. Also is there
> anything
> outside of xcat that we should look into, I'm not a network
> expert
> but I can pass the information to one.
>
> [root@master ~]# lsdef node1879
> Object name: node1879
> addkcmdline=vga=0x303
> rdblacklist=nouveau,mlx4_ib,mlx4_en,mlx4_core
> nouveau.modeset=0
> arch=x86_64
> bmc=node1879-man0
> chain=runcmd=bmcsetup,standby
> cons=ipmi
> currchain=boot
> currstate=boot
> groups=phase10,all,hp,compute,SL250,gpu,k20
> initrd=xcat/SL/x86_64/initrd.img
> interface=eth2
> kcmdline=quiet repo=
> *http://10.125.40.6/install/SL/x86_64/*
> <http://10.125.40.6/install/SL/x86_64/> ks=
> *http://10.125.40.6/install/autoinst/node1879*
> <http://10.125.40.6/install/autoinst/node1879> ksdevice=eth2 cmdline
> console=tty0 console=ttyS0,19200n8r
> kernel=xcat/SL/x86_64/vmlinuz
> mac=2c:44:fd:97:51:a0
> mgt=ipmi
> mpa=hpsl250chassis79
> mtm=SL250
> netboot=pxe
> nfsdir=/install
> nfsserver=10.125.40.6
> ondiscover=nodediscover
> os=SL
> postbootscripts=otherpkgs,palmetto-ipmi,serialconsole
>
>
>
> postscripts=syslog,remoteshell,syncfiles,resyslog,palmetto-mountxcat,palmetto-yumpackages,palmetto-nfsmounts,palmetto-syncfiles,palmetto-services,palmetto-bios,palmetto-ethernet,palmetto-umountxcat,palmetto-puppet
>
> power=ipmi
> primarynic=eth2
> profile=compute
> provmethod=install
> rack=BM-24
> room=ITC
> serial=USE4220D0N
> serialflow=hard
> serialport=0
> serialspeed=19200
> slotid=3
> supportedarchs=x86,x86_64
> switch=h-itc-bm24-d4810-19
> switchinterface=TenGigabitEthernet 0/19
> switchport=19
> tftpserver=10.125.40.6
> unit=40-43
> xcatmaster=10.125.40.6
>
>
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> *(864)505-4293* <%28864%29505-4293>
> *[email protected]* <[email protected]>
>
>
> (See attached file: node1879-dhcp_error.JPG)
>
>
> ------------------------------------------------------------------------------
>
> Want fast and easy access to all the code in your enterprise?
> Index
> and
> search up to 200,000 lines of code with a free copy of Black
> Duck®
> Code Sight™ - the same software that powers the world's
> largest
> code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> *http://p.sf.net/sfu/bds* <http://p.sf.net/sfu/bds>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]*
> <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
>
> Want fast and easy access to all the code in your enterprise?
> Index
> and
> search up to 200,000 lines of code with a free copy of Black
> Duck®
> Code Sight™ - the same software that powers the world's
> largest
> code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> *http://p.sf.net/sfu/bds* <http://p.sf.net/sfu/bds>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]*
> <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
>
> Want fast and easy access to all the code in your enterprise? Index
> and
> search up to 200,000 lines of code with a free copy of Black
> Duck®
> Code Sight™ - the same software that powers the world's
> largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
>
> *http://p.sf.net/sfu/bds_______________________________________________
> xCAT-user*
>
> <http://p.sf.net/sfu/bds_______________________________________________xCAT-user>
> mailing
> list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index
> and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> *http://p.sf.net/sfu/bds* <http://p.sf.net/sfu/bds>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> *http://p.sf.net/sfu/bds* <http://p.sf.net/sfu/bds>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> *http://p.sf.net/sfu/bds* <http://p.sf.net/sfu/bds>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> http://p.sf.net/sfu/bds_______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> http://p.sf.net/sfu/bds
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
