What does rpm -qf /opt/xcat/bin/rboot return.
That date is not that old. As far as I can remember we have never had an
rboot in xCAT2.
If you run
ls -al /opt/xcat/bin/*boot* what is the output
I see on my 2.8.4:
ls -al /opt/xcat/bin/*boot*
lrwxrwxrwx 1 root root 17 Jul 21 07:23 /opt/xcat/bin/rbootseq ->
../bin/xcatclient
lrwxrwxrwx 1 root root 17 Jul 21 07:23 /opt/xcat/bin/rnetboot ->
../bin/xcatclient
lrwxrwxrwx 1 root root 17 Jul 21 07:23 /opt/xcat/bin/rsetboot ->
../bin/xcatclient
If it is not too large, could you give us the content of rboot.
Lissa K. Valletta
8-3/B10
Poughkeepsie, NY 12601
(tie 293) 433-3102
From: Lanae Neild <lne...@clemson.edu>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date: 07/30/2014 11:12 AM
Subject: Re: [xcat-user] xCAT 2.8.4 and HP IPMI
Oh and to answer question about rboot, it may be a relic from some older
xcat, we will stop using it:
[root@master bin]# whereis rboot
rboot: /opt/xcat/bin/rboot
[root@master bin]# ls -al /opt/xcat/bin/rboot
-rwxr-xr-x 1 root root 72 Sep 26 2011 /opt/xcat/bin/rboot
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Tue, Jul 29, 2014 at 1:09 PM, Lissa Valletta <lis...@us.ibm.com> wrote:
Did you try using the current documented method of deploying your
nodes.
Run the following:
nodeset node1903 osimage=SL-x86_64-install-compute
rsetboot node1903 net
rpower node1903 boot
You could also run
rinstall node1903 -O SL-x86_64-install-compute which basically does the
three above commands.
https://sourceforge.net/p/xcat/wiki/XCAT_iDataPlex_Cluster_Quick_Start/#begin-installation
Might run lsdef -t osimage SL-x86_64-install-compute to check your
definitions.
xCAT does not have a rboot command. Where did rboot come from??
Lissa K. Valletta
8-3/B10
Poughkeepsie, NY 12601
(tie 293) 433-3102
Inactive hide details for Lanae Neild ---07/29/2014 11:18:54 AM---Does
anyone else have a similar issue or know how to work aroLanae Neild
---07/29/2014 11:18:54 AM---Does anyone else have a similar issue or know
how to work around it? We have HP SL250s some with the
From: Lanae Neild <lne...@clemson.edu>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date: 07/29/2014 11:18 AM
Subject: [xcat-user] xCAT 2.8.4 and HP IPMI
Does anyone else have a similar issue or know how to work around it?
We have HP SL250s some with their IPMI firmware rev 1.20 some with 1.40.
Confirmed problem with both. They have their ILO settings configured the
same way, and xCAT rboot and rinstall worked before we upgraded from
2.7x to 2.8.4. Now we're getting this error, and have to manually reboot
them, as it no longer works with xCAT:
[root@master ~]# rboot node1903
node1903: boot
node1903: Error: Invalid role
node1903: Error: Invalid role
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Invalid role
node1903: Error: Invalid role
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Invalid role
node1903: Error: Invalid role
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Invalid role
node1903: Error: Invalid role
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Invalid role
node1903: Error: Invalid role
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
Here is the node definition for this one:
[root@master ~]# lsdef node1903
Object name: node1903
addkcmdline=vga=0x303 rdblacklist=nouveau,mlx4_ib,mlx4_en,mlx4_core
nouveau.modeset=0
arch=x86_64
bmc=node1903-man0
chain=runcmd=bmcsetup,standby
cons=ipmi
currchain=boot
currstate=boot
groups=phase09,all,hp,compute,SL250,gpu,k20
initrd=xcat/SL/x86_64/initrd.img
interface=eth2
kcmdline=quiet repo=http://10.125.40.6/install/SL/x86_64/ ks=
http://10.125.40.6/install/autoinst/node1903 ksdevice=eth2 cmdline
console=tty0 console=ttyS0,19200n8r
kernel=xcat/SL/x86_64/vmlinuz
mac=2c:44:fd:97:18:88
mgt=ipmi
mpa=hpsl250chassis33
mtm=SL250
netboot=pxe
nfsdir=/install
nfsserver=10.125.40.6
ondiscover=nodediscover
os=SL
postbootscripts=otherpkgs,palmetto-ipmi,serialconsole
postscripts=syslog,remoteshell,syncfiles,resyslog,palmetto-mountxcat,palmetto-yumpackages,palmetto-nfsmounts,palmetto-syncfiles,palmetto-services,palmetto-bios,palmetto-ethernet,palmetto-umountxcat,palmetto-puppet
power=ipmi
primarynic=eth2
profile=compute
provmethod=SL-x86_64-install-compute
rack=BM-27
room=ITC
serial=USE341HCLF
serialflow=hard
serialport=0
serialspeed=19200
slotid=3
status=booted
statustime=10-24-2013 20:29:25
supportedarchs=x86,x86_64
switch=h-itc-bm27-d4810-117
switchinterface=0/1
switchport=1
tftpserver=10.125.40.6
unit=8-11
xcatmaster=10.125.40.6
[root@master ~]#
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
