Regarding rboot - Could it be from an xCAT 1.x? They used to run that here,
before my time.

[root@master bin]# rpm -qf  /opt/xcat/bin/rboot
file /opt/xcat/bin/rboot is not owned by any package


This is the file, not much to it:
#!/bin/bash
/opt/xcat/sbin/nodeset $1 boot
/opt/xcat/bin/rpower $1 boot



Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu





On Wed, Jul 30, 2014 at 1:13 PM, Lissa Valletta <lis...@us.ibm.com> wrote:

> What does  rpm -qf  /opt/xcat/bin/rboot  return.
> That date is not that old.  As far as I can remember we have never had an
> rboot in xCAT2.
>
> If you run
> ls  -al  /opt/xcat/bin/*boot*  what is the output
>
> I see on my 2.8.4:
>
> ls -al /opt/xcat/bin/*boot*
> lrwxrwxrwx 1 root root 17 Jul 21 07:23 /opt/xcat/bin/rbootseq ->
> ../bin/xcatclient
> lrwxrwxrwx 1 root root 17 Jul 21 07:23 /opt/xcat/bin/rnetboot ->
> ../bin/xcatclient
> lrwxrwxrwx 1 root root 17 Jul 21 07:23 /opt/xcat/bin/rsetboot ->
> ../bin/xcatclient
>
> If it is not too  large,  could you give us the content of rboot.
>
>
>
> Lissa K. Valletta
> 8-3/B10
> Poughkeepsie, NY 12601
> (tie 293) 433-3102
>
>
>
> [image: Inactive hide details for Lanae Neild ---07/30/2014 11:12:46
> AM---Oh and to answer question about rboot, it may be a relic from]Lanae
> Neild ---07/30/2014 11:12:46 AM---Oh and to answer question about rboot, it
> may be a relic from some older xcat, we will stop using it
>
>
> From: Lanae Neild <lne...@clemson.edu>
> To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
> Date: 07/30/2014 11:12 AM
> Subject: Re: [xcat-user] xCAT 2.8.4 and HP IPMI
>
> ------------------------------
>
>
>
> Oh and to answer question about rboot, it may be a relic from some older
> xcat, we will stop using it:
>
> [root@master bin]# whereis rboot
> rboot: /opt/xcat/bin/rboot
> [root@master bin]# ls -al /opt/xcat/bin/rboot
> -rwxr-xr-x 1 root root 72 Sep 26  2011 /opt/xcat/bin/rboot
>
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> (864)505-4293
> *lne...@clemson.edu* <lne...@clemson.edu>
>
>
>
>
>
> On Tue, Jul 29, 2014 at 1:09 PM, Lissa Valletta <*lis...@us.ibm.com*
> <lis...@us.ibm.com>> wrote:
>
>    Did you try using the current documented  method  of deploying your
>    nodes.
>    Run the following:
>
>    nodeset node1903 osimage=SL-x86_64-install-compute
>    rsetboot node1903 net
>    rpower node1903 boot
>
>    You could also run
>    rinstall node1903 -O SL-x86_64-install-compute  which basically does
>    the three above commands.
>
>
>
>    
> *https://sourceforge.net/p/xcat/wiki/XCAT_iDataPlex_Cluster_Quick_Start/#begin-installation*
>    
> <https://sourceforge.net/p/xcat/wiki/XCAT_iDataPlex_Cluster_Quick_Start/#begin-installation>
>
>    Might run lsdef -t osimage SL-x86_64-install-compute  to check your
>    definitions.
>
>    xCAT does not have a rboot command.   Where did rboot come from??
>
>
>
>    Lissa K. Valletta
>    8-3/B10
>    Poughkeepsie, NY 12601
>    (tie 293) 433-3102
>
>
>
>    [image: Inactive hide details for Lanae Neild ---07/29/2014 11:18:54
>    AM---Does anyone else have a similar issue or know how to work aro]Lanae
>    Neild ---07/29/2014 11:18:54 AM---Does anyone else have a similar issue or
>    know how to work around it? We have HP SL250s some with the
>
>
>
>    From: Lanae Neild <*lne...@clemson.edu* <lne...@clemson.edu>>
>    To: xCAT Users Mailing list <*xcat-user@lists.sourceforge.net*
>    <xcat-user@lists.sourceforge.net>>
>    Date: 07/29/2014 11:18 AM
>
>    Subject: [xcat-user] xCAT 2.8.4 and HP IPMI
>    ------------------------------
>
>
>
>    Does anyone else have a similar issue or know how to work around it?
>
>    We have HP SL250s some with their IPMI firmware rev 1.20 some with
>    1.40. Confirmed problem with both. They have their ILO settings configured
>    the same way, and  xCAT rboot and rinstall worked before we upgraded from
>    2.7x to 2.8.4. Now we're getting this error, and have to manually reboot
>    them, as it no longer works with xCAT:
>
>    [root@master ~]# rboot node1903
>    node1903: boot
>    node1903: Error: Invalid role
>    node1903: Error: Invalid role
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Invalid role
>    node1903: Error: Invalid role
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Invalid role
>    node1903: Error: Invalid role
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Invalid role
>    node1903: Error: Invalid role
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>    node1903: Error: Invalid role
>    node1903: Error: Invalid role
>    node1903: Error: Insufficient resources to create new session (wait
>    for existing sessions to timeout)
>
>
>    Here is the node definition for this one:
>
>    [root@master ~]# lsdef node1903
>    Object name: node1903
>        addkcmdline=vga=0x303
>    rdblacklist=nouveau,mlx4_ib,mlx4_en,mlx4_core nouveau.modeset=0
>        arch=x86_64
>        bmc=node1903-man0
>        chain=runcmd=bmcsetup,standby
>        cons=ipmi
>        currchain=boot
>        currstate=boot
>        groups=phase09,all,hp,compute,SL250,gpu,k20
>        initrd=xcat/SL/x86_64/initrd.img
>        interface=eth2
>        kcmdline=quiet repo=*http://10.125.40.6/install/SL/x86_64/*
>    <http://10.125.40.6/install/SL/x86_64/> ks=
>    *http://10.125.40.6/install/autoinst/node1903*
>    <http://10.125.40.6/install/autoinst/node1903> ksdevice=eth2 cmdline
>    console=tty0 console=ttyS0,19200n8r
>        kernel=xcat/SL/x86_64/vmlinuz
>        mac=2c:44:fd:97:18:88
>        mgt=ipmi
>        mpa=hpsl250chassis33
>        mtm=SL250
>        netboot=pxe
>        nfsdir=/install
>        nfsserver=10.125.40.6
>        ondiscover=nodediscover
>        os=SL
>        postbootscripts=otherpkgs,palmetto-ipmi,serialconsole
>
>    
> postscripts=syslog,remoteshell,syncfiles,resyslog,palmetto-mountxcat,palmetto-yumpackages,palmetto-nfsmounts,palmetto-syncfiles,palmetto-services,palmetto-bios,palmetto-ethernet,palmetto-umountxcat,palmetto-puppet
>        power=ipmi
>        primarynic=eth2
>        profile=compute
>        provmethod=SL-x86_64-install-compute
>        rack=BM-27
>        room=ITC
>        serial=USE341HCLF
>        serialflow=hard
>        serialport=0
>        serialspeed=19200
>        slotid=3
>        status=booted
>        statustime=10-24-2013 20:29:25
>        supportedarchs=x86,x86_64
>        switch=h-itc-bm27-d4810-117
>        switchinterface=0/1
>        switchport=1
>        tftpserver=10.125.40.6
>        unit=8-11
>        xcatmaster=10.125.40.6
>    [root@master ~]#
>
>    Lanae Neild
>    Systems Programmer I
>    HPC, CCIT, Clemson University
> *(864)505-4293* <%28864%29505-4293>
> *lne...@clemson.edu* <lne...@clemson.edu>
>
>
>
>    
> ------------------------------------------------------------------------------
>    Infragistics Professional
>    Build stunning WinForms apps today!
>    Reboot your WinForms applications with our WinForms controls.
>    Build a bridge from your legacy apps to the future.
>
>    
> *http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk*
>    
> <http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk>
>    _______________________________________________
>    xCAT-user mailing list
> *xCAT-user@lists.sourceforge.net* <xCAT-user@lists.sourceforge.net>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
>    <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>    
> ------------------------------------------------------------------------------
>    Infragistics Professional
>    Build stunning WinForms apps today!
>    Reboot your WinForms applications with our WinForms controls.
>    Build a bridge from your legacy apps to the future.
>
>    
> *http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk*
>    
> <http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk>
>    _______________________________________________
>    xCAT-user mailing list
> *xCAT-user@lists.sourceforge.net* <xCAT-user@lists.sourceforge.net>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
>    <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls. 
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to