Hmm, that looks bizarre. If you try to do 'ipmitool -I lanplus -U
<username> -P <password> -H <ilo> power state' from a remote node, does
ipmitool also fail? This might be some oddity with your DL160 systems.
Sorry I don't know off hand, I only know our system x products directly.
From: Lanae Neild <lne...@clemson.edu>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date: 08/01/2014 10:50 AM
Subject: Re: [xcat-user] xCAT 2.8.4 and HP IPMI
The channel 1 isn't set up, but either 'ipmitool lan print' or 'ipmitool
lan print 2' return the same thing:
[root@node1903 ~]# ipmitool lan print 1
Channel 1 is not a LAN channel
[root@node1903 ~]# ipmitool lan print
Set in Progress : Set Complete
Auth Type Support :
IP Address Source : Static Address
IP Address : 10.125.58.99
Subnet Mask : 255.255.0.0
MAC Address : 28:92:4a:38:d7:e8
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Default Gateway IP : 10.125.100.1
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
Cipher Suite Priv Max : Not Available
Maybe the channel is important? However, on a HP DL165 where xcat rinstalls
are working fine, its also channel 2, so much for that. But there's a lot
more information from this command on a node that's working. I would think
this might be a clue except that we can't find anything changed about the
sl250s except for xcat being upgraded, when the issue started. Also, I can
still log in to the web mgmt interface on the sl250s, using the same
interface and credentials that xcat is configured to use for ipmi.
output from a HP DL165 where xcat with ipmi works:
[root@node1572 ~]# ipmitool lan print 2
Set in Progress : Set Complete
Auth Type Support : NONE MD5 PASSWORD
Auth Type Enable : Callback : NONE MD5 PASSWORD
: User : NONE MD5 PASSWORD
: Operator : NONE MD5 PASSWORD
: Admin : NONE MD5 PASSWORD
: OEM : NONE MD5 PASSWORD
IP Address Source : Static Address
IP Address : 10.125.56.136
Subnet Mask : 255.255.0.0
MAC Address : 98:4b:e1:60:94:71
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 10.125.100.1
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
RMCP+ Cipher Suites : 0,1,2,3
Cipher Suite Priv Max : OOOOXXXXXXXXXXX
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Fri, Aug 1, 2014 at 7:05 AM, Jarrod Johnson <jarrod.b.john...@gmail.com>
wrote:
How does ipmitool fare? Ipmitool lan print 1 if it does work and
ipmitool cmd syntax that did work
On Jul 31, 2014 10:42 AM, "Lanae Neild" <lne...@clemson.edu> wrote:
Forcing ipmi2support to 0 didn't make any difference
[root@master xCAT]# nodeset node1903 osimage=SL-x86_64-install-compute
node1903: install SL-x86_64-compute
[root@master xCAT]# rsetboot node1903 net
node1903: Error: Invalid role
node1903: Error: Invalid role
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Insufficient resources to create new session (wait for
existing sessions to timeout)
node1903: Error: Invalid role
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Wed, Jul 30, 2014 at 8:09 PM, Jarrod Johnson <
jarrod.b.john...@gmail.com> wrote:
Hmmm... If you edit IPMI.pm and force ipmi2support to 0 do things
change?
On Jul 30, 2014 2:43 PM, "Lanae Neild" <lne...@clemson.edu> wrote:
Correction - replaced the correct file this
time, /opt/xcat/lib/perl/xCAT/IPMI.pm with the one from 2.7.8 gives
this - at least it is a different error this time!
[root@master xCAT]# nodeset node1903
osimage=SL-x86_64-install-compute
node1903: install SL-x86_64-compute
[root@master xCAT]# rsetboot node1903 net
node1903: Error: 9 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
node1903: Error: 9 code on opening RMCP+ session
node1903: Error: 9 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Wed, Jul 30, 2014 at 2:12 PM, Lanae Neild <lne...@clemson.edu>
wrote:
I tried ipmi.pm from 2.7.8, that's what we had last before
upgrading to 2.8.4. It seems module files have been moved around
since then
[root@master xCAT_plugin]# nodeset node1903
osimage=SL-x86_64-install-compute
node1903: install SL-x86_64-compute
[root@master xCAT_plugin]# rsetboot node1903 net
Error: ipmi plugin bug, pid 14688, process description: 'xCATd SSL:
rsetboot to node1903 for root@localhost.localdomain: ipmi instance'
with error 'Can't locate object method "get_ServiceNode" via
package "xCAT::Utils" at /opt/xcat/lib/perl/xCAT_plugin/ipmi.pm
line 5865.
' while trying to fulfill request for the following nodes: node1903
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Wed, Jul 30, 2014 at 8:51 AM, Jarrod B Johnson <
jbjoh...@us.ibm.com> wrote:
Can you try IPMI.pm from 2.7? If 2.7 still works, that means the
measures to try to work even if Administrator is forbidden messed
something up...
>
> From: Lanae Neild <lne...@clemson.edu>
> To: xCAT Users Mailing list <
xcat-user@lists.sourceforge.net>
> Date: 2014-07-29 11:20
> Subject: [xcat-user] xCAT 2.8.4 and HP IPMI
>
>
>
> Does anyone else have a similar issue or know how to work
around it?
>
> We have HP SL250s some with their IPMI firmware rev 1.20 some
with
> 1.40. Confirmed problem with both. They have their ILO settings
> configured the same way, and xCAT rboot and rinstall worked
before
> we upgraded from 2.7x to 2.8.4. Now we're getting this error,
and
> have to manually reboot them, as it no longer works with xCAT:
>
> [root@master ~]# rboot node1903
> node1903: boot
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient resources to create new session
(wait
> for existing sessions to timeout)
>
>
> Here is the node definition for this one:
>
> [root@master ~]# lsdef node1903
> Object name: node1903
> addkcmdline=vga=0x303
> rdblacklist=nouveau,mlx4_ib,mlx4_en,mlx4_core nouveau.modeset=0
> arch=x86_64
> bmc=node1903-man0
> chain=runcmd=bmcsetup,standby
> cons=ipmi
> currchain=boot
> currstate=boot
> groups=phase09,all,hp,compute,SL250,gpu,k20
> initrd=xcat/SL/x86_64/initrd.img
> interface=eth2
> kcmdline=quiet repo=http://10.125.40.6/install/SL/x86_64/
ks=
> http://10.125.40.6/install/autoinst/node1903 ksdevice=eth2
cmdline
> console=tty0 console=ttyS0,19200n8r
> kernel=xcat/SL/x86_64/vmlinuz
> mac=2c:44:fd:97:18:88
> mgt=ipmi
> mpa=hpsl250chassis33
> mtm=SL250
> netboot=pxe
> nfsdir=/install
> nfsserver=10.125.40.6
> ondiscover=nodediscover
> os=SL
> postbootscripts=otherpkgs,palmetto-ipmi,serialconsole
> postscripts=syslog,remoteshell,syncfiles,resyslog,palmetto-
> mountxcat,palmetto-yumpackages,palmetto-nfsmounts,palmetto-
> syncfiles,palmetto-services,palmetto-bios,palmetto-
> ethernet,palmetto-umountxcat,palmetto-puppet
> power=ipmi
> primarynic=eth2
> profile=compute
> provmethod=SL-x86_64-install-compute
> rack=BM-27
> room=ITC
> serial=USE341HCLF
> serialflow=hard
> serialport=0
> serialspeed=19200
> slotid=3
> status=booted
> statustime=10-24-2013 20:29:25
> supportedarchs=x86,x86_64
> switch=h-itc-bm27-d4810-117
> switchinterface=0/1
> switchport=1
> tftpserver=10.125.40.6
> unit=8-11
> xcatmaster=10.125.40.6
> [root@master ~]#
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> (864)505-4293
> lne...@clemson.edu
>
>
>
------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
