Weird. we have a couple different IPMI firmware versions in the sl250's and
both behave the same way. What could be different in xcat 2.7.8 that it
would work when this command doesn't?
sl250 from remote:
[root@master xCAT]# ipmitool -I lanplus -U xxxx -P xxxx -H node1903-man0
power status
Error: Unable to establish IPMI v2 / RMCP+ session
Unable to get Chassis Power Status
dl165 from remote:
[root@master xCAT]# ipmitool -I lanplus -U xxxx -P xxxx -H node1572-man0
power status
Chassis Power is on
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Fri, Aug 1, 2014 at 11:05 AM, Jarrod B Johnson <jbjoh...@us.ibm.com>
wrote:
> Hmm, that looks bizarre. If you try to do 'ipmitool -I lanplus -U
> <username> -P <password> -H <ilo> power state' from a remote node, does
> ipmitool also fail? This might be some oddity with your DL160 systems.
> Sorry I don't know off hand, I only know our system x products directly.
>
> [image: Inactive hide details for Lanae Neild ---08/01/2014 10:50:56
> AM---The channel 1 isn't set up, but either 'ipmitool lan print' o]Lanae
> Neild ---08/01/2014 10:50:56 AM---The channel 1 isn't set up, but either
> 'ipmitool lan print' or 'ipmitool lan print 2' return the sam
>
>
> From: Lanae Neild <lne...@clemson.edu>
> To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
> Date: 08/01/2014 10:50 AM
> Subject: Re: [xcat-user] xCAT 2.8.4 and HP IPMI
> ------------------------------
>
>
>
> The channel 1 isn't set up, but either 'ipmitool lan print' or 'ipmitool
> lan print 2' return the same thing:
>
> [root@node1903 ~]# ipmitool lan print 1
> Channel 1 is not a LAN channel
> [root@node1903 ~]# ipmitool lan print
> Set in Progress : Set Complete
> Auth Type Support :
> IP Address Source : Static Address
> IP Address : 10.125.58.99
> Subnet Mask : 255.255.0.0
> MAC Address : 28:92:4a:38:d7:e8
> BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
> Default Gateway IP : 10.125.100.1
> 802.1q VLAN ID : Disabled
> 802.1q VLAN Priority : 0
> Cipher Suite Priv Max : Not Available
>
> Maybe the channel is important? However, on a HP DL165 where xcat
> rinstalls are working fine, its also channel 2, so much for that. But
> there's a lot more information from this command on a node that's working.
> I would think this might be a clue except that we can't find anything
> changed about the sl250s except for xcat being upgraded, when the issue
> started. Also, I can still log in to the web mgmt interface on the sl250s,
> using the same interface and credentials that xcat is configured to use for
> ipmi.
>
> output from a HP DL165 where xcat with ipmi works:
>
> [root@node1572 ~]# ipmitool lan print 2
> Set in Progress : Set Complete
> Auth Type Support : NONE MD5 PASSWORD
> Auth Type Enable : Callback : NONE MD5 PASSWORD
> : User : NONE MD5 PASSWORD
> : Operator : NONE MD5 PASSWORD
> : Admin : NONE MD5 PASSWORD
> : OEM : NONE MD5 PASSWORD
> IP Address Source : Static Address
> IP Address : 10.125.56.136
> Subnet Mask : 255.255.0.0
> MAC Address : 98:4b:e1:60:94:71
> SNMP Community String : public
> IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
> BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
> Gratituous ARP Intrvl : 2.0 seconds
> Default Gateway IP : 10.125.100.1
> 802.1q VLAN ID : Disabled
> 802.1q VLAN Priority : 0
> RMCP+ Cipher Suites : 0,1,2,3
> Cipher Suite Priv Max : OOOOXXXXXXXXXXX
> : X=Cipher Suite Unused
> : c=CALLBACK
> : u=USER
> : o=OPERATOR
> : a=ADMIN
> : O=OEM
>
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> (864)505-4293
> *lne...@clemson.edu* <lne...@clemson.edu>
>
>
>
>
>
> On Fri, Aug 1, 2014 at 7:05 AM, Jarrod Johnson <
> *jarrod.b.john...@gmail.com* <jarrod.b.john...@gmail.com>> wrote:
>
> How does ipmitool fare? Ipmitool lan print 1 if it does work and
> ipmitool cmd syntax that did work
>
> On Jul 31, 2014 10:42 AM, "Lanae Neild" <*lne...@clemson.edu*
> <lne...@clemson.edu>> wrote:
> Forcing ipmi2support to 0 didn't make any difference
>
> [root@master xCAT]# nodeset node1903
> osimage=SL-x86_64-install-compute
> node1903: install SL-x86_64-compute
> [root@master xCAT]# rsetboot node1903 net
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Insufficient resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Insufficient resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
>
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> *(864)505-4293* <%28864%29505-4293>
> *lne...@clemson.edu* <lne...@clemson.edu>
>
>
>
>
>
> On Wed, Jul 30, 2014 at 8:09 PM, Jarrod Johnson <
> *jarrod.b.john...@gmail.com* <jarrod.b.john...@gmail.com>> wrote:
> Hmmm... If you edit IPMI.pm and force ipmi2support to 0 do
> things change?
>
> On Jul 30, 2014 2:43 PM, "Lanae Neild" <*lne...@clemson.edu*
> <lne...@clemson.edu>> wrote:
> Correction - replaced the correct file this time,
> /opt/xcat/lib/perl/xCAT/IPMI.pm with the one from 2.7.8 gives
> this - at
> least it is a different error this time!
>
> [root@master xCAT]# nodeset node1903
> osimage=SL-x86_64-install-compute
> node1903: install SL-x86_64-compute
> [root@master xCAT]# rsetboot node1903 net
> node1903: Error: 9 code on opening RMCP+ session
> node1903: Error: 1 code on opening RMCP+ session
> node1903: Error: 1 code on opening RMCP+ session
> node1903: Error: 1 code on opening RMCP+ session
> node1903: Error: 9 code on opening RMCP+ session
> node1903: Error: 9 code on opening RMCP+ session
> node1903: Error: 1 code on opening RMCP+ session
> node1903: Error: 1 code on opening RMCP+ session
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> *(864)505-4293* <%28864%29505-4293>
> *lne...@clemson.edu* <lne...@clemson.edu>
>
>
>
>
>
> On Wed, Jul 30, 2014 at 2:12 PM, Lanae Neild <
> *lne...@clemson.edu* <lne...@clemson.edu>> wrote:
> I tried *ipmi.pm* <http://ipmi.pm/> from 2.7.8, that's
> what we had last before upgrading to 2.8.4. It seems module
> files have
> been moved around since then
>
> [root@master xCAT_plugin]# nodeset node1903
> osimage=SL-x86_64-install-compute
> node1903: install SL-x86_64-compute
> [root@master xCAT_plugin]# rsetboot node1903 net
> Error: ipmi plugin bug, pid 14688, process description:
> 'xCATd SSL: rsetboot to node1903 for
> root@localhost.localdomain:
> ipmi instance' with error 'Can't locate object method
> "get_ServiceNode" via
> package "xCAT::Utils" at /opt/xcat/lib/perl/xCAT_plugin/
> *ipmi.pm* <http://ipmi.pm/> line 5865.
> ' while trying to fulfill request for the following nodes:
> node1903
>
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> *(864)505-4293* <%28864%29505-4293>
> *lne...@clemson.edu* <lne...@clemson.edu>
>
>
>
>
>
> On Wed, Jul 30, 2014 at 8:51 AM, Jarrod B Johnson <
> *jbjoh...@us.ibm.com* <jbjoh...@us.ibm.com>> wrote:
> Can you try IPMI.pm from 2.7? If 2.7 still works, that
> means the measures to try to work even if Administrator is
> forbidden messed
> something up...
>
>
> >
> > From: Lanae Neild <*lne...@clemson.edu*
> <lne...@clemson.edu>>
> > To: xCAT Users Mailing list <
> *xcat-user@lists.sourceforge.net*
> <xcat-user@lists.sourceforge.net>>
> > Date: 2014-07-29 11:20
> > Subject: [xcat-user] xCAT 2.8.4 and HP IPMI
> >
> >
> >
> > Does anyone else have a similar issue or know how to
> work around it?
> >
> > We have HP SL250s some with their IPMI firmware rev
> 1.20 some with
> > 1.40. Confirmed problem with both. They have their
> ILO settings
> > configured the same way, and xCAT rboot and rinstall
> worked before
> > we upgraded from 2.7x to 2.8.4. Now we're getting
> this error, and
> > have to manually reboot them, as it no longer works
> with xCAT:
> >
> > [root@master ~]# rboot node1903
> > node1903: boot
> > node1903: Error: Invalid role
> > node1903: Error: Invalid role
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Invalid role
> > node1903: Error: Invalid role
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Invalid role
> > node1903: Error: Invalid role
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Invalid role
> > node1903: Error: Invalid role
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> > node1903: Error: Invalid role
> > node1903: Error: Invalid role
> > node1903: Error: Insufficient resources to create new
> session (wait
> > for existing sessions to timeout)
> >
> >
> > Here is the node definition for this one:
> >
> > [root@master ~]# lsdef node1903
> > Object name: node1903
> > addkcmdline=vga=0x303
> > rdblacklist=nouveau,mlx4_ib,mlx4_en,mlx4_core
> nouveau.modeset=0
> > arch=x86_64
> > bmc=node1903-man0
> > chain=runcmd=bmcsetup,standby
> > cons=ipmi
> > currchain=boot
> > currstate=boot
> > groups=phase09,all,hp,compute,SL250,gpu,k20
> > initrd=xcat/SL/x86_64/initrd.img
> > interface=eth2
> > kcmdline=quiet repo=
> *http://10.125.40.6/install/SL/x86_64/*
> <http://10.125.40.6/install/SL/x86_64/> ks=
> > *http://10.125.40.6/install/autoinst/node1903*
> <http://10.125.40.6/install/autoinst/node1903> ksdevice=eth2
> cmdline
> > console=tty0 console=ttyS0,19200n8r
> > kernel=xcat/SL/x86_64/vmlinuz
> > mac=2c:44:fd:97:18:88
> > mgt=ipmi
> > mpa=hpsl250chassis33
> > mtm=SL250
> > netboot=pxe
> > nfsdir=/install
> > nfsserver=10.125.40.6
> > ondiscover=nodediscover
> > os=SL
> >
> postbootscripts=otherpkgs,palmetto-ipmi,serialconsole
> >
> postscripts=syslog,remoteshell,syncfiles,resyslog,palmetto-
> >
> mountxcat,palmetto-yumpackages,palmetto-nfsmounts,palmetto-
> > syncfiles,palmetto-services,palmetto-bios,palmetto-
> > ethernet,palmetto-umountxcat,palmetto-puppet
> > power=ipmi
> > primarynic=eth2
> > profile=compute
> > provmethod=SL-x86_64-install-compute
> > rack=BM-27
> > room=ITC
> > serial=USE341HCLF
> > serialflow=hard
> > serialport=0
> > serialspeed=19200
> > slotid=3
> > status=booted
> > statustime=10-24-2013 20:29:25
> > supportedarchs=x86,x86_64
> > switch=h-itc-bm27-d4810-117
> > switchinterface=0/1
> > switchport=1
> > tftpserver=10.125.40.6
> > unit=8-11
> > xcatmaster=10.125.40.6
> > [root@master ~]#
> >
> > Lanae Neild
> > Systems Programmer I
> > HPC, CCIT, Clemson University
> > *(864)505-4293* <%28864%29505-4293>
> > *lne...@clemson.edu* <lne...@clemson.edu>
> >
> >
> >
>
> ------------------------------------------------------------------------------
> > Infragistics Professional
> > Build stunning WinForms apps today!
> > Reboot your WinForms applications with our WinForms
> controls.
> > Build a bridge from your legacy apps to the future.
> >
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk>
> > _______________________________________________
> > xCAT-user mailing list
> > *xCAT-user@lists.sourceforge.net*
> <xCAT-user@lists.sourceforge.net>
> >
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
> >
>
> ------------------------------------------------------------------------------
> > Infragistics Professional
> > Build stunning WinForms apps today!
> > Reboot your WinForms applications with our WinForms
> controls.
> > Build a bridge from your legacy apps to the future.
> >
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk>
> > _______________________________________________
> > xCAT-user mailing list
> > *xCAT-user@lists.sourceforge.net*
> <xCAT-user@lists.sourceforge.net>
> >
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms
> controls.
> Build a bridge from your legacy apps to the future.
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *xCAT-user@lists.sourceforge.net* <xCAT-user@lists.sourceforge.net>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *xCAT-user@lists.sourceforge.net* <xCAT-user@lists.sourceforge.net>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *xCAT-user@lists.sourceforge.net* <xCAT-user@lists.sourceforge.net>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
>
> ------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications with our WinForms controls.
> Build a bridge from your legacy apps to the future.
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *xCAT-user@lists.sourceforge.net* <xCAT-user@lists.sourceforge.net>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> *http://p.sf.net/sfu/bds* <http://p.sf.net/sfu/bds>
> _______________________________________________
> xCAT-user mailing list
> *xCAT-user@lists.sourceforge.net* <xCAT-user@lists.sourceforge.net>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> http://p.sf.net/sfu/bds_______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> Want fast and easy access to all the code in your enterprise? Index and
> search up to 200,000 lines of code with a free copy of Black Duck
> Code Sight - the same software that powers the world's largest code
> search on Ohloh, the Black Duck Open Hub! Try it now.
> http://p.sf.net/sfu/bds
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
