Regretably, I think you have to take up the issue with HP support at this
point. ipmitool is a pretty widely known tool so they shouldn't balk at
that method of reproducing it like they might balk at over xCAT.
From: Lanae Neild <lne...@clemson.edu>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date: 08/01/2014 11:31 AM
Subject: Re: [xcat-user] xCAT 2.8.4 and HP IPMI
Weird. we have a couple different IPMI firmware versions in the sl250's and
both behave the same way. What could be different in xcat 2.7.8 that it
would work when this command doesn't?
sl250 from remote:
[root@master xCAT]# ipmitool -I lanplus -U xxxx -P xxxx -H node1903-man0
power status
Error: Unable to establish IPMI v2 / RMCP+ session
Unable to get Chassis Power Status
dl165 from remote:
[root@master xCAT]# ipmitool -I lanplus -U xxxx -P xxxx -H node1572-man0
power status
Chassis Power is on
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Fri, Aug 1, 2014 at 11:05 AM, Jarrod B Johnson <jbjoh...@us.ibm.com>
wrote:
Hmm, that looks bizarre. If you try to do 'ipmitool -I lanplus -U
<username> -P <password> -H <ilo> power state' from a remote node, does
ipmitool also fail? This might be some oddity with your DL160 systems.
Sorry I don't know off hand, I only know our system x products directly.
Inactive hide details for Lanae Neild ---08/01/2014 10:50:56 AM---The
channel 1 isn't set up, but either 'ipmitool lan print' oLanae Neild
---08/01/2014 10:50:56 AM---The channel 1 isn't set up, but either
'ipmitool lan print' or 'ipmitool lan print 2' return the sam
From: Lanae Neild <lne...@clemson.edu>
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Date: 08/01/2014 10:50 AM
Subject: Re: [xcat-user] xCAT 2.8.4 and HP IPMI
The channel 1 isn't set up, but either 'ipmitool lan print' or 'ipmitool
lan print 2' return the same thing:
[root@node1903 ~]# ipmitool lan print 1
Channel 1 is not a LAN channel
[root@node1903 ~]# ipmitool lan print
Set in Progress : Set Complete
Auth Type Support :
IP Address Source : Static Address
IP Address : 10.125.58.99
Subnet Mask : 255.255.0.0
MAC Address : 28:92:4a:38:d7:e8
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Default Gateway IP : 10.125.100.1
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
Cipher Suite Priv Max : Not Available
Maybe the channel is important? However, on a HP DL165 where xcat
rinstalls are working fine, its also channel 2, so much for that. But
there's a lot more information from this command on a node that's
working. I would think this might be a clue except that we can't find
anything changed about the sl250s except for xcat being upgraded, when
the issue started. Also, I can still log in to the web mgmt interface on
the sl250s, using the same interface and credentials that xcat is
configured to use for ipmi.
output from a HP DL165 where xcat with ipmi works:
[root@node1572 ~]# ipmitool lan print 2
Set in Progress : Set Complete
Auth Type Support : NONE MD5 PASSWORD
Auth Type Enable : Callback : NONE MD5 PASSWORD
: User : NONE MD5 PASSWORD
: Operator : NONE MD5 PASSWORD
: Admin : NONE MD5 PASSWORD
: OEM : NONE MD5 PASSWORD
IP Address Source : Static Address
IP Address : 10.125.56.136
Subnet Mask : 255.255.0.0
MAC Address : 98:4b:e1:60:94:71
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled
Gratituous ARP Intrvl : 2.0 seconds
Default Gateway IP : 10.125.100.1
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
RMCP+ Cipher Suites : 0,1,2,3
Cipher Suite Priv Max : OOOOXXXXXXXXXXX
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Fri, Aug 1, 2014 at 7:05 AM, Jarrod Johnson <
jarrod.b.john...@gmail.com> wrote:
How does ipmitool fare? Ipmitool lan print 1 if it does work and
ipmitool cmd syntax that did work
On Jul 31, 2014 10:42 AM, "Lanae Neild" <lne...@clemson.edu> wrote:
Forcing ipmi2support to 0 didn't make any difference
[root@master xCAT]# nodeset node1903
osimage=SL-x86_64-install-compute
node1903: install SL-x86_64-compute
[root@master xCAT]# rsetboot node1903 net
node1903: Error: Invalid role
node1903: Error: Invalid role
node1903: Error: Insufficient resources to create new session
(wait for existing sessions to timeout)
node1903: Error: Insufficient resources to create new session
(wait for existing sessions to timeout)
node1903: Error: Insufficient resources to create new session
(wait for existing sessions to timeout)
node1903: Error: Invalid role
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Wed, Jul 30, 2014 at 8:09 PM, Jarrod Johnson <
jarrod.b.john...@gmail.com> wrote:
Hmmm... If you edit IPMI.pm and force ipmi2support to
0 do things change?
On Jul 30, 2014 2:43 PM, "Lanae Neild" <
lne...@clemson.edu> wrote:
Correction - replaced the correct file this
time, /opt/xcat/lib/perl/xCAT/IPMI.pm with the
one from 2.7.8 gives this - at least it is a
different error this time!
[root@master xCAT]# nodeset node1903
osimage=SL-x86_64-install-compute
node1903: install SL-x86_64-compute
[root@master xCAT]# rsetboot node1903 net
node1903: Error: 9 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
node1903: Error: 9 code on opening RMCP+ session
node1903: Error: 9 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
node1903: Error: 1 code on opening RMCP+ session
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Wed, Jul 30, 2014 at 2:12 PM, Lanae Neild <
lne...@clemson.edu> wrote:
I tried ipmi.pm from 2.7.8, that's what we
had last before upgrading to 2.8.4. It
seems module files have been moved around
since then
[root@master xCAT_plugin]# nodeset node1903
osimage=SL-x86_64-install-compute
node1903: install SL-x86_64-compute
[root@master xCAT_plugin]# rsetboot
node1903 net
Error: ipmi plugin bug, pid 14688, process
description: 'xCATd SSL: rsetboot to
node1903 for root@localhost.localdomain:
ipmi instance' with error 'Can't locate
object method "get_ServiceNode" via package
"xCAT::Utils"
at /opt/xcat/lib/perl/xCAT_plugin/ipmi.pm
line 5865.
' while trying to fulfill request for the
following nodes: node1903
Lanae Neild
Systems Programmer I
HPC, CCIT, Clemson University
(864)505-4293
lne...@clemson.edu
On Wed, Jul 30, 2014 at 8:51 AM, Jarrod B
Johnson <jbjoh...@us.ibm.com> wrote:
Can you try IPMI.pm from 2.7? If 2.7
still works, that means the measures
to try to work even if Administrator
is forbidden messed something up...
>
> From: Lanae Neild <
lne...@clemson.edu>
> To: xCAT Users Mailing list
<xcat-user@lists.sourceforge.net>
> Date: 2014-07-29 11:20
> Subject: [xcat-user] xCAT
2.8.4 and HP IPMI
>
>
>
> Does anyone else have a similar
issue or know how to work around it?
>
> We have HP SL250s some with their
IPMI firmware rev 1.20 some with
> 1.40. Confirmed problem with both.
They have their ILO settings
> configured the same way, and xCAT
rboot and rinstall worked before
> we upgraded from 2.7x to 2.8.4. Now
we're getting this error, and
> have to manually reboot them, as it
no longer works with xCAT:
>
> [root@master ~]# rboot node1903
> node1903: boot
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
> node1903: Error: Invalid role
> node1903: Error: Invalid role
> node1903: Error: Insufficient
resources to create new session (wait
> for existing sessions to timeout)
>
>
> Here is the node definition for
this one:
>
> [root@master ~]# lsdef node1903
> Object name: node1903
> addkcmdline=vga=0x303
>
rdblacklist=nouveau,mlx4_ib,mlx4_en,mlx4_core
nouveau.modeset=0
> arch=x86_64
> bmc=node1903-man0
> chain=runcmd=bmcsetup,standby
> cons=ipmi
> currchain=boot
> currstate=boot
>
groups=phase09,all,hp,compute,SL250,gpu,k20
>
initrd=xcat/SL/x86_64/initrd.img
> interface=eth2
> kcmdline=quiet repo=
http://10.125.40.6/install/SL/x86_64/
ks=
>
http://10.125.40.6/install/autoinst/node1903
ksdevice=eth2 cmdline
> console=tty0 console=ttyS0,19200n8r
> kernel=xcat/SL/x86_64/vmlinuz
> mac=2c:44:fd:97:18:88
> mgt=ipmi
> mpa=hpsl250chassis33
> mtm=SL250
> netboot=pxe
> nfsdir=/install
> nfsserver=10.125.40.6
> ondiscover=nodediscover
> os=SL
>
postbootscripts=otherpkgs,palmetto-ipmi,serialconsole
>
postscripts=syslog,remoteshell,syncfiles,resyslog,palmetto-
>
mountxcat,palmetto-yumpackages,palmetto-nfsmounts,palmetto-
>
syncfiles,palmetto-services,palmetto-bios,palmetto-
>
ethernet,palmetto-umountxcat,palmetto-puppet
> power=ipmi
> primarynic=eth2
> profile=compute
>
provmethod=SL-x86_64-install-compute
> rack=BM-27
> room=ITC
> serial=USE341HCLF
> serialflow=hard
> serialport=0
> serialspeed=19200
> slotid=3
> status=booted
> statustime=10-24-2013 20:29:25
> supportedarchs=x86,x86_64
> switch=h-itc-bm27-d4810-117
> switchinterface=0/1
> switchport=1
> tftpserver=10.125.40.6
> unit=8-11
> xcatmaster=10.125.40.6
> [root@master ~]#
>
> Lanae Neild
> Systems Programmer I
> HPC, CCIT, Clemson University
> (864)505-4293
> lne...@clemson.edu
>
>
>
------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications
with our WinForms controls.
> Build a bridge from your legacy
apps to the future.
>
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
>
_______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
> Infragistics Professional
> Build stunning WinForms apps today!
> Reboot your WinForms applications
with our WinForms controls.
> Build a bridge from your legacy
apps to the future.
>
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
>
_______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications
with our WinForms controls.
Build a bridge from your legacy apps
to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our
WinForms controls.
Build a bridge from your legacy apps to the
future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms
controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Infragistics Professional
Build stunning WinForms apps today!
Reboot your WinForms applications with our WinForms controls.
Build a bridge from your legacy apps to the future.
http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index
and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Want fast and easy access to all the code in your enterprise? Index and
search up to 200,000 lines of code with a free copy of Black Duck
Code Sight - the same software that powers the world's largest code
search on Ohloh, the Black Duck Open Hub! Try it now.
http://p.sf.net/sfu/bds
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
