Hi ,Damir
     Can you try this
     SD530 support zero power on configure ( don’t need to power on the node 
,only AC on ,no DC on ) ,and confluent service will be detect the SMM and XCC 
by the IPv6 address  , that also called out of band management

https://github.com/824380210/xcat_book/blob/master/20180109_stark_SD530_WI.md

Let me know if anything is not clear , and I will try to help ,thanks


Peter CZ peng
Department :Complex Solution Rack TE
Address:ISH3 Shenzhen
Lenovo China

+86 86361590
+86 18129979128
609 1590
peng...@lenovo.com<mailto:zengd...@lenovo.com>



Lenovo.com /www.lenovo.com <http://www.lenovo.com/www.lenovo.com>
Twitter<http://twitter.com/lenovo> | Facebook | 
Instagram<https://instagram.com/lenovo> | Blogs<http://blog.lenovo.com/> | 
Forums<http://forums.lenovo.com/>


[Lenovo_2015]




From: Damir Krstic <damir.krs...@gmail.com>
Sent: Thursday, May 3, 2018 11:59 PM
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: [xcat-user] sd530 deployment guide

Hi all,

We have just purchased a rack of SD530 nodes for our cluster. We have been 
deploying NextScale nodes for sometime now and are very familiar with the 
process. Relatedly, xCAT group had a wonderful document outlining all stages of 
NextScale deployment at this page: 
https://sourceforge.net/p/xcat/wiki/XCAT_NeXtScale_Clusters/

I am wondering if such page exists for SD530 deployment using xCAT? I searched 
for it and I can't find it. We are trying to deploy a single chassis with 4 
SD530 servers and is having little bit of trouble with SMM and bmcsetup and 
things like that. Without a complete guide, it's not easy to figure out how all 
pieces fit together. For example, is SMM equivelent to FPC on NextScale, and if 
so, what is the configfpc equivalent command for SD530? Also, each SD530 node 
has two eth ports in it...is one of the ports IMM/Eth shared port that we run 
normal bmcsetup against or is the SMM now a single IMM port that is shared 
across 4 servers in the chassis?

Things like this are not clear so any help is appreciated.

Thank you.
Damir
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Reply via email to