No, you can do it the same way you do it with any other machine, just take into
account that XCC dedicated means it will go via the SMM port.
With SD530 the default mode for XCC is dedicated.
By default, the SMM network is disabled (only the SMM, XCCs are reachable) and
you need to enable it if you want to use it. Let me know if you need the ipmi
command.
Confluent will simply do all that things for you (including SMM network
config). I strongly recommend using it. Will make your life easier.
[http://lenovocentral.lenovo.com/marketing/branding/email_signature/images/gradient.gif]
Gilad Berman
HPC Architect
Lenovo EMEA
[Phone]+972-52-2554262
[Email]gber...@lenovo.com<mailto:gber...@lenovo.com>
Lenovo.com <http://www.lenovo.com/>
Twitter<http://twitter.com/lenovo> | Facebook<http://www.facebook.com/lenovo> |
Instagram<https://instagram.com/lenovo> | Blogs<http://blog.lenovo.com/> |
Forums<http://forums.lenovo.com/>
[DCG-Hardware]
From: Damir Krstic [mailto:damir.krs...@gmail.com]
Sent: Thursday, May 3, 2018 7:32 PM
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: Re: [xcat-user] sd530 deployment guide
so do we need confluent service installed to deploy SD530?
On Thu, May 3, 2018 at 11:15 AM peter CZ1 Peng
<peng...@lenovo.com<mailto:peng...@lenovo.com>> wrote:
Hi ,Damir
Can you try this
SD530 support zero power on configure ( don’t need to power on the node
,only AC on ,no DC on ) ,and confluent service will be detect the SMM and XCC
by the IPv6 address , that also called out of band management
https://github.com/824380210/xcat_book/blob/master/20180109_stark_SD530_WI.md
Let me know if anything is not clear , and I will try to help ,thanks
Peter CZ peng
Department :Complex Solution Rack TE
Address:ISH3 Shenzhen
Lenovo China
+86 86361590
+86 18129979128<tel:+86%20181%202997%209128>
609 1590
peng...@lenovo.com<mailto:zengd...@lenovo.com>
Lenovo.com /www.lenovo.com <http://www.lenovo.com/www.lenovo.com>
Twitter<http://twitter.com/lenovo> | Facebook |
Instagram<https://instagram.com/lenovo> | Blogs<http://blog.lenovo.com/> |
Forums<http://forums.lenovo.com/>
[Lenovo_2015]
From: Damir Krstic <damir.krs...@gmail.com<mailto:damir.krs...@gmail.com>>
Sent: Thursday, May 3, 2018 11:59 PM
To: xCAT Users Mailing list
<xcat-user@lists.sourceforge.net<mailto:xcat-user@lists.sourceforge.net>>
Subject: [xcat-user] sd530 deployment guide
Hi all,
We have just purchased a rack of SD530 nodes for our cluster. We have been
deploying NextScale nodes for sometime now and are very familiar with the
process. Relatedly, xCAT group had a wonderful document outlining all stages of
NextScale deployment at this page:
https://sourceforge.net/p/xcat/wiki/XCAT_NeXtScale_Clusters/
I am wondering if such page exists for SD530 deployment using xCAT? I searched
for it and I can't find it. We are trying to deploy a single chassis with 4
SD530 servers and is having little bit of trouble with SMM and bmcsetup and
things like that. Without a complete guide, it's not easy to figure out how all
pieces fit together. For example, is SMM equivelent to FPC on NextScale, and if
so, what is the configfpc equivalent command for SD530? Also, each SD530 node
has two eth ports in it...is one of the ports IMM/Eth shared port that we run
normal bmcsetup against or is the SMM now a single IMM port that is shared
across 4 servers in the chassis?
Things like this are not clear so any help is appreciated.
Thank you.
Damir
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net<mailto:xCAT-user@lists.sourceforge.net>
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
