so do we need confluent service installed to deploy SD530?
On Thu, May 3, 2018 at 11:15 AM peter CZ1 Peng <peng...@lenovo.com> wrote:
> Hi ,Damir
>
> Can you try this
>
> SD530 support zero power on configure ( don’t need to power on the
> node ,only AC on ,no DC on ) ,and confluent service will be detect the SMM
> and XCC by the IPv6 address , that also called out of band management
>
>
>
>
> https://github.com/824380210/xcat_book/blob/master/20180109_stark_SD530_WI.md
>
>
>
> Let me know if anything is not clear , and I will try to help ,thanks
>
>
>
>
>
> *Peter CZ peng*
> Department :Complex Solution Rack TE
> Address:ISH3 Shenzhen
>
> Lenovo China
>
> [image: Phone]+86 86361590
> [image: Email]+86 18129979128 <+86%20181%202997%209128>
> [image: VOIP]609 1590
> [image: Email]peng...@lenovo.com <zengd...@lenovo.com>
>
>
>
> Lenovo.com /www.lenovo.com <http://www.lenovo.com/www.lenovo.com>
> Twitter <http://twitter.com/lenovo> | *Facebook* | Instagram
> <https://instagram.com/lenovo> | Blogs <http://blog.lenovo.com/> | Forums
> <http://forums.lenovo.com/>
>
> [image: Lenovo_2015]
>
>
>
>
>
> *From:* Damir Krstic <damir.krs...@gmail.com>
> *Sent:* Thursday, May 3, 2018 11:59 PM
> *To:* xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
> *Subject:* [xcat-user] sd530 deployment guide
>
>
>
> Hi all,
>
>
>
> We have just purchased a rack of SD530 nodes for our cluster. We have been
> deploying NextScale nodes for sometime now and are very familiar with the
> process. Relatedly, xCAT group had a wonderful document outlining all
> stages of NextScale deployment at this page:
> https://sourceforge.net/p/xcat/wiki/XCAT_NeXtScale_Clusters/
>
>
>
> I am wondering if such page exists for SD530 deployment using xCAT? I
> searched for it and I can't find it. We are trying to deploy a single
> chassis with 4 SD530 servers and is having little bit of trouble with SMM
> and bmcsetup and things like that. Without a complete guide, it's not easy
> to figure out how all pieces fit together. For example, is SMM equivelent
> to FPC on NextScale, and if so, what is the configfpc equivalent command
> for SD530? Also, each SD530 node has two eth ports in it...is one of the
> ports IMM/Eth shared port that we run normal bmcsetup against or is the SMM
> now a single IMM port that is shared across 4 servers in the chassis?
>
>
>
> Things like this are not clear so any help is appreciated.
>
>
>
> Thank you.
>
> Damir
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> xCAT-user mailing list
> xCAT-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
