Chris,
For p9 nodes, try "rinv <node> firm"
Also, can you show the "rinv" output from new and old x86 hardware ? I
would like to see the difference in the output.
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein
From: "Christopher Walker" <c.j.wal...@qmul.ac.uk>
To: "xCAT Users Mailing list" <xcat-user@lists.sourceforge.net>
Date: 12/07/2021 05:31 AM
Subject: Re: [xcat-user] [EXTERNAL] Re: rinv <nodename> firmware
Hi Mark,
This is on x86 nodes.
When I say "Used to report", I meant that older hardware with IMM2 used to
(and indeed still does with the current version of xCAT) report firmware
versions. Newer hardware with an XCC does not.
On power9,
rinv <nodename> firmware
gives: "Error: Unsupported command: rinv firmware"
rflash -l <nodename>
lists a set of firmware.
Chris
From: Mark Gurevich <gurev...@us.ibm.com>
Sent: 06 December 2021 18:59
To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net>
Subject: [EXTERNAL] Re: [xcat-user] rinv <nodename> firmware
CAUTION: This email originated from outside of QMUL. Do not click links or
open attachments unless you recognise the sender and know the content is
safe.
Chris,
Is this on P9 or x86 nodes ?
Also, when you say "It used to report", do you mean on an older version of
xCAT or some older hardware ?
Mark Gurevich
Poughkeepsie Development Lab
HPC Software Development - xCAT
"If we knew what it was we were doing, it would not be called research,
would it?"
--Albert Einstein
Inactive hide details for "Christopher Walker" ---12/06/2021 11:02:04
AM---rinv <nodename> firmware currently only reports the"Christopher
Walker" ---12/06/2021 11:02:04 AM---rinv <nodename> firmware currently
only reports the BMC firmware.
From: "Christopher Walker" <c.j.wal...@qmul.ac.uk>
To: "xCAT-user" <xcat-user@lists.sourceforge.net>
Date: 12/06/2021 11:02 AM
Subject: [EXTERNAL] [xcat-user] rinv <nodename> firmware
rinv <nodename> firmware
currently only reports the BMC firmware.
It used to report IMM version.
Is it possible to get it to report the XCC version, and indeed other
firmware like the network card?
Chris
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user
