Do you have a Flarm and nothing else connected to the IOIO and XCSoar? (e.g. you don't have a smart vario also connected?) If this is the case, then it sounds like an issue with your IOIO connection.
Probably you need to adjust the pot voltage knob on the IOIO board to the maximum voltage. Different IOIO boards seem to use different pots, some have no "stop" in them and you don't know where the maximum position is. I would recommend opening your IOIO box, connecting a volt meter to your USB output terminals that powers your device (while your device is connected), and figure out where the pot voltage is the maximum and mark it with a pen and leave it there. I recently had the same problem when I upgrade from a DroidX to the Streak5 which seems to require a higher voltage to maintain the connection with the IOIO. Also, please upgrade to 6.3beta per the instructions in this thread. Rob At 05:45 AM 03/14/2012, Jacques Graells wrote: >I seem to have some intermittent loss of connectivity from the Streak to the >Flarm. > >It seems to work well and then sometimes after 30 min or perhaps an hour ( I >didn't time it) looses connection. >To have connection again I disconnect and reconnect either the flarm to ioio >or ioio to streak cable >I have experienced this with 3 different Flarms so it ain't the Flarm unit. > >Unfortunately I do not have details of the exact conditions of how it >happens and I don't have access to a glider or Flarm for the next 3 weeks. I >just wanted to have an idea if anyone else has the same problem or if >someone can report that they can connect to a Flarm for hours without >issues. > > >Also is it possible to disable the streak asking to enable mass storage upon >connection of the ioio USB cable > > >Thanks > >Jax > > > >------------------------------------------------------------------------------ >Virtualization & Cloud Management Using Capacity Planning >Cloud computing makes use of virtualization - but cloud computing >also focuses on allowing computing to be delivered as a service. >http://www.accelacomm.com/jaw/sfnl/114/51521223/ >_______________________________________________ >Xcsoar-user mailing list >Xcsoar-user@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/xcsoar-user ------------------------------------------------------------------------------ Virtualization & Cloud Management Using Capacity Planning Cloud computing makes use of virtualization - but cloud computing also focuses on allowing computing to be delivered as a service. http://www.accelacomm.com/jaw/sfnl/114/51521223/ _______________________________________________ Xcsoar-user mailing list Xcsoar-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcsoar-user
