Ronald,
It's frustrating. For me the solution was to upgrade to "Olleh" version of
the operating system. Unfortunately upgrade was not very easy (at least in
my opinion). For me the "unofficial" Android versions did not work, the
phone started to continuously restart itself while flying. (Somebody should
explain me, why it did not do that while on ground!)
I have now two Streaks with 2.3 "Olleh" and they work 100% with IOIO and
Soartronic UART extension board.
Another interesting thing is, that the IOIO manager app does not work with
the DELL Streak running 2.2.2 Android. I have not tested with this 2.3
"Olleh", but I think I should.
I also have LG P070 phone, and I never had any problems with that. So I
would say that it's the DELL's Android 2.2.2 version, not the IOIO or
XCSoar.
-kh
2012/8/23 Ronald Niederhagen <ronald_niederha...@freenet.de>
> Hi all,
>
> I'm using a Dell Streak with a Cambridge CAI302 and a FLARM connected
> through a IOIO. It works really well as long as I configure only 1 of
> the 2 devices. With 1 device I've been using it for well over 50 hours
> in flight without any issues.
>
> But as soon as I configure both devices (FLARM and CAI302) it's less
> than 20 minutes and it freezes with the message "GPS not connected". The
> only thing that helps in that case is to power-cycle the IOIO.
>
> I've tried several XCSoar versions (6.3.* and 6.4) with different IOIO
> F/W (3.11, 3.23, 3.24) with different IOIO bootloaders (3.01, 3.03,
> 3.04). I used a real IOIO and a IOIO clone. Nothing seem to make a
> difference: it works well with 1 device and freezes when I configure 2
> devices.
>
> I've also observed that downloading flight logs from the CAI302 almost
> always fails. Most of the time it fails even getting the flight list.
> Downloading the flight from the FLARM works most of the time. And if it
> fails, I try it again and succeed.
>
> Another interesting symptom: I start with 1 device (say the CAI302).
> After 30 minutes I configure the FLARM in addition to the CAI302. After
> another couple of minutes I change the configuration back to 1 device
> only. Initially it still works for a while. But than freezes with the
> message "GPS not connected" after ~20 minutes.
>
> I'm running Android 2.2.2 on the Streak. I'm open to try a different
> version, but have no idea what's worth trying.
>
> Has anybody an idea how to solve this issue?
>
> Ronald
>
>
> ------------------------------------------------------------------------------
> Live Security Virtual Conference
> Exclusive live event will cover all the ways today's security and
> threat landscape has changed and how IT managers can respond. Discussions
> will include endpoint security, mobile security and the latest in malware
> threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
> _______________________________________________
> Xcsoar-user mailing list
> Xcsoar-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcsoar-user
>
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Xcsoar-user mailing list
Xcsoar-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
