Hi all,

I tried Longhorn_2.9.3_Final.zip on my secondary Streak. It's a simple 
update process, although the instructions are a bit sparse and newbies 
might get stuck in the process.

My primary Streak runs Olleh with a CM7 update since over a year now. It 
is stable, boots quicker, and seem to use less power compared to the 
Longhorn_2.9.3. The instructions are very detailed, and complete:
Search for "Noobs guide to 407 upgrade and CM7 upgrade".
You'll get to this page:
http://forum.xda-developers.com/showpost.php?p=23527490&postcount=216

Just my 2 cents.

Ronald

Am 29.04.2013 18:57, schrieb Adrien Ott:
> Hi Horst,
>
> I'm not a software genius either, but I managed to follow the steps
> mentioned here (Android 2.3.7, not 2.3.3 by the way)
> http://forum.xda-developers.com/showthread.php?t=1355878
>
> And when vocabulary issued appeared, I found this very helpful
> http://forum.xda-developers.com/wiki/Dell_Streak_5/Flashing_Guide
>
> Following these steps would be my advice (I've a working IOIO setup)
> Good luck
>
> Adrien
>
>
>
> 2013/4/29 Horst Rupp <ho...@rupp-family.de <mailto:ho...@rupp-family.de>>
>
>     Hi,
>
>     I found the old mails by Dan Marotta on this issue. Unfortunately,
>     some of
>     the links to obtain downloads are broken, in particular the link to
>     Recovery
>     350.
>     I also found that the latest Gingerbread 407 is now available from
>     www.mobileupdate.dell.com <http://www.mobileupdate.dell.com>. But
>     there I found no hint where to obtain the
>     recovery. I also found that those update procedures are pretty complex.
>     Perhaps too complex for me, even as I am a computer engineer of the very
>     first wave. But that is part of the problem. I am no hacker anymore. Has
>     anybody recent experience with this ?
>
>     I know, I'm kind of late for this update. I used a BT box so far,
>     but I am
>     now confronted with the challenge to hook up two sources to XCSoar.
>     I have an IOIObox, but the communication between XCSoar und the devices
>     breaks down every 10 minutes or so.
>     I was told the update to 2.3.3 is the way out.
>
>     Can anybody give me advice ?
>
>     Thanks
>     Horst
>
>
>     
> ------------------------------------------------------------------------------
>     Try New Relic Now & We'll Send You this Cool Shirt
>     New Relic is the only SaaS-based application performance monitoring
>     service
>     that delivers powerful full stack analytics. Optimize and monitor your
>     browser, app, & servers with just a few lines of code. Try New Relic
>     and get this awesome Nerd Life shirt!
>     http://p.sf.net/sfu/newrelic_d2d_apr
>     _______________________________________________
>     Xcsoar-user mailing list
>     Xcsoar-user@lists.sourceforge.net
>     <mailto:Xcsoar-user@lists.sourceforge.net>
>     https://lists.sourceforge.net/lists/listinfo/xcsoar-user
>
>
>
>
> ------------------------------------------------------------------------------
> Try New Relic Now & We'll Send You this Cool Shirt
> New Relic is the only SaaS-based application performance monitoring service
> that delivers powerful full stack analytics. Optimize and monitor your
> browser, app, & servers with just a few lines of code. Try New Relic
> and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr
>
>
>
> _______________________________________________
> Xcsoar-user mailing list
> Xcsoar-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcsoar-user
>

------------------------------------------------------------------------------
Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET
Get 100% visibility into your production application - at no cost.
Code-level diagnostics for performance bottlenecks with <2% overhead
Download for free and get started troubleshooting in minutes.
http://p.sf.net/sfu/appdyn_d2d_ap1
_______________________________________________
Xcsoar-user mailing list
Xcsoar-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcsoar-user

Reply via email to