I did not get other versions than Olleh working well. My € 0,02 2013/5/30 Ronald Niederhagen <ronald_niederha...@freenet.de>: > Hi all, > > I tried Longhorn_2.9.3_Final.zip on my secondary Streak. It's a simple > update process, although the instructions are a bit sparse and newbies > might get stuck in the process. > > My primary Streak runs Olleh with a CM7 update since over a year now. It > is stable, boots quicker, and seem to use less power compared to the > Longhorn_2.9.3. The instructions are very detailed, and complete: > Search for "Noobs guide to 407 upgrade and CM7 upgrade". > You'll get to this page: > http://forum.xda-developers.com/showpost.php?p=23527490&postcount=216 > > Just my 2 cents. > > Ronald > > Am 29.04.2013 18:57, schrieb Adrien Ott: >> Hi Horst, >> >> I'm not a software genius either, but I managed to follow the steps >> mentioned here (Android 2.3.7, not 2.3.3 by the way) >> http://forum.xda-developers.com/showthread.php?t=1355878 >> >> And when vocabulary issued appeared, I found this very helpful >> http://forum.xda-developers.com/wiki/Dell_Streak_5/Flashing_Guide >> >> Following these steps would be my advice (I've a working IOIO setup) >> Good luck >> >> Adrien >> >> >> >> 2013/4/29 Horst Rupp <ho...@rupp-family.de <mailto:ho...@rupp-family.de>> >> >> Hi, >> >> I found the old mails by Dan Marotta on this issue. Unfortunately, >> some of >> the links to obtain downloads are broken, in particular the link to >> Recovery >> 350. >> I also found that the latest Gingerbread 407 is now available from >> www.mobileupdate.dell.com <http://www.mobileupdate.dell.com>. But >> there I found no hint where to obtain the >> recovery. I also found that those update procedures are pretty complex. >> Perhaps too complex for me, even as I am a computer engineer of the very >> first wave. But that is part of the problem. I am no hacker anymore. Has >> anybody recent experience with this ? >> >> I know, I'm kind of late for this update. I used a BT box so far, >> but I am >> now confronted with the challenge to hook up two sources to XCSoar. >> I have an IOIObox, but the communication between XCSoar und the devices >> breaks down every 10 minutes or so. >> I was told the update to 2.3.3 is the way out. >> >> Can anybody give me advice ? >> >> Thanks >> Horst >> >> >> >> ------------------------------------------------------------------------------ >> Try New Relic Now & We'll Send You this Cool Shirt >> New Relic is the only SaaS-based application performance monitoring >> service >> that delivers powerful full stack analytics. Optimize and monitor your >> browser, app, & servers with just a few lines of code. Try New Relic >> and get this awesome Nerd Life shirt! >> http://p.sf.net/sfu/newrelic_d2d_apr >> _______________________________________________ >> Xcsoar-user mailing list >> Xcsoar-user@lists.sourceforge.net >> <mailto:Xcsoar-user@lists.sourceforge.net> >> https://lists.sourceforge.net/lists/listinfo/xcsoar-user >> >> >> >> >> ------------------------------------------------------------------------------ >> Try New Relic Now & We'll Send You this Cool Shirt >> New Relic is the only SaaS-based application performance monitoring service >> that delivers powerful full stack analytics. Optimize and monitor your >> browser, app, & servers with just a few lines of code. Try New Relic >> and get this awesome Nerd Life shirt! http://p.sf.net/sfu/newrelic_d2d_apr >> >> >> >> _______________________________________________ >> Xcsoar-user mailing list >> Xcsoar-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/xcsoar-user >> > > ------------------------------------------------------------------------------ > Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET > Get 100% visibility into your production application - at no cost. > Code-level diagnostics for performance bottlenecks with <2% overhead > Download for free and get started troubleshooting in minutes. > http://p.sf.net/sfu/appdyn_d2d_ap1 > _______________________________________________ > Xcsoar-user mailing list > Xcsoar-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcsoar-user
------------------------------------------------------------------------------ Introducing AppDynamics Lite, a free troubleshooting tool for Java/.NET Get 100% visibility into your production application - at no cost. Code-level diagnostics for performance bottlenecks with <2% overhead Download for free and get started troubleshooting in minutes. http://p.sf.net/sfu/appdyn_d2d_ap1 _______________________________________________ Xcsoar-user mailing list Xcsoar-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcsoar-user
