Syed Amer Gilani wrote: > I had similar problems, but with a 2.6.18 Kernel. Check you Kernel > configurations of mscan. The default clock of 66Mhz is possibly > wrong, on my mpc5200b board it is 33Mhz. And also check the Pin > Configuration. I had also no termination on board, so i had to add it > to the cable.
Hi, This fixed it: setting it from 66MHz to 33MHz in the MSCAN configuration. At least the IOUnit gets messages now. Thanks a lot !! If now only the clock_nanosleep() would wait as long as expected and would not return after 1/4 of the time .... Best regards, Daniel. _______________________________________________ Xenomai-help mailing list [email protected] https://mail.gna.org/listinfo/xenomai-help
