Hi,
There was no option in menuconfig for enabling
CONFIG_XENO_DRIVERS_ANALOGY_DEBUG_LEVEL=1
CONFIG_XENO_DRIVERS_ANALOGY_DRIVER_DEBUG_LEVEL=1
I edited .config manually and that worked (I hope).
Error trace attached. I hope this will narrow-down the problem
Ettore
2010/1/5 Alexis Berlemont <berlemont.h...@free.fr>:
> Hi,
>
> Ettore Pedretti wrote:
>>
>> Hi
>>
>> I have installed Xenomai 2.5.0 and tried to attach the module:
>> analogy_config analogy0 analogy_ni_pcimio
>>
>> The error trace is attached as a text file
>
> I do not see any analogy debug traces. In your kernel configuration,
> have you configured the following options like this:
> CONFIG_XENO_DRIVERS_ANALOGY_DEBUG=y
> CONFIG_XENO_DRIVERS_ANALOGY_DEBUG_LEVEL=1
> CONFIG_XENO_DRIVERS_ANALOGY_DRIVER_DEBUG_LEVEL=1
>
>> Regards
>> Ettore
>>
> Alexis.
>
--
Ettore Pedretti, SUPA
School of Physics and Astronomy
University of St Andrews, North Haugh,
St Andrews, Fife, KY16 9SS, Scotland
Ph: +44-1334-461666, Fax: +44-1334-463104
The University of St Andrews is a charity registered in Scotland : No SC013532
Linux version 2.6.32.2 (r...@fangorn) (gcc version 4.3.2 (Debian 4.3.2-1.1) )
#1 SMP PREEMPT Wed Jan 6 04:18:06 PST 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009a800 (usable)
BIOS-e820: 000000000009a800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bff70000 (usable)
BIOS-e820: 00000000bff70000 - 00000000bff77000 (ACPI data)
BIOS-e820: 00000000bff77000 - 00000000bff80000 (ACPI NVS)
BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
user-defined physical RAM map:
user: 0000000000000000 - 000000000009a800 (usable)
user: 000000000009a800 - 00000000000a0000 (reserved)
user: 00000000000e4000 - 0000000000100000 (reserved)
user: 0000000000100000 - 0000000040000000 (usable)
user: 00000000bff70000 - 00000000bff77000 (ACPI data)
user: 00000000bff77000 - 00000000bff80000 (ACPI NVS)
user: 00000000bff80000 - 00000000c0000000 (reserved)
user: 00000000e0000000 - 00000000f0000000 (reserved)
user: 00000000fec00000 - 00000000fec10000 (reserved)
user: 00000000fee00000 - 00000000fee01000 (reserved)
user: 00000000ff800000 - 00000000ffc00000 (reserved)
user: 00000000fffffc00 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x40000 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BFF80000 mask FFFF80000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-0000000037f1e000
0000000000 - 0000400000 page 4k
0000400000 - 0037c00000 page 2M
0037c00000 - 0037f1e000 page 4k
kernel direct mapping tables up to 37f1e000 @ 10000-15000
RAMDISK: 37e18000 - 37feffc5
Allocated new RAMDISK: 00100000 - 002d7fc5
Move RAMDISK from 0000000037e18000 - 0000000037feffc4 to 00100000 - 002d7fc4
895MB LOWMEM available.
mapped low ram: 0 - 37f1e000
low ram: 0 - 37f1e000
node 0 low ram: 00000000 - 37f1e000
node 0 bootmap 00011000 - 00017fe4
(9 early reservations) ==> bootmem [0000000000 - 0037f1e000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 0001327338] TEXT DATA BSS ==> [0001000000 - 0001327338]
#4 [000009a800 - 0000100000] BIOS reserved ==> [000009a800 - 0000100000]
#5 [0001328000 - 000132e170] BRK ==> [0001328000 - 000132e170]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000100000 - 00002d7fc5] NEW RAMDISK ==> [0000100000 - 00002d7fc5]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00f5d90] f5d90
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00037f1e
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009a
0: 0x00000100 -> 0x00037f1e
On node 0 totalpages: 229032
free_area_init_node: node 0, pgdat c1269900, node_mem_map c132f200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3946 pages, LIFO batch:0
Normal zone: 1759 pages used for memmap
Normal zone: 223295 pages, LIFO batch:31
Using APIC driver default
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
MPTABLE: OEM ID: INTEL
MPTABLE: Product ID: Lindenhurst
MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
Processor #6
I/O APIC #2 Version 32 at 0xFEC00000.
I/O APIC #3 Version 32 at 0xFEC81000.
I/O APIC #4 Version 32 at 0xFEC81400.
Enabling APIC mode: Flat. Using 3 I/O APICs
Processors: 2
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 72
Allocating PCI resources starting at 40000000 (gap: 40000000:7ff70000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c1c00000 s30744 r0 d22504 u2097152
pcpu-alloc: s30744 r0 d22504 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227241
Kernel command line: root=LABEL=ROOTFS_TEST ro noht mem=2048M memmap=1024M
pci=routeirq
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 902596k/916600k available (1830k kernel code, 13236k reserved, 650k
data, 308k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff20000 - 0xfffff000 ( 892 kB)
vmalloc : 0xf871e000 - 0xfff1e000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7f1e000 ( 895 MB)
.init : 0xc126d000 - 0xc12ba000 ( 308 kB)
.data : 0xc11c9a6b - 0xc126c618 ( 650 kB)
.text : 0xc1000000 - 0xc11c9a6b (1830 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
I-pipe 2.5-00: pipeline enabled.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2999.916 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency..
5999.83 BogoMIPS (lpj=2999916)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 10k freed
ExtINT not setup in hardware but reported by MP table
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
Booting processor 1 APIC 0x6 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.17 BogoMIPS (lpj=2999588)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM1)
CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (11999.00 BogoMIPS).
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd870, last bus=6
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1d.3: reg 20 io port: [0x18a0-0x18bf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0x18f0-0x18ff]
pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
pci 0000:00:1f.5: reg 10 io port: [0x1400-0x14ff]
pci 0000:00:1f.5: reg 14 io port: [0x1800-0x183f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 32bit mmio: [0xd0100000-0xd0100fff]
pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
pci 0000:02:00.2: PME# disabled
pci 0000:02:00.3: reg 10 32bit mmio: [0xd0101000-0xd0101fff]
pci 0000:00:03.0: bridge io port: [0x2000-0x3fff]
pci 0000:00:03.0: bridge 32bit mmio: [0xd0100000-0xd08fffff]
pci 0000:03:03.0: reg 10 64bit mmio: [0xd0200000-0xd02fffff]
pci 0000:03:03.0: reg 18 io port: [0x2000-0x20ff]
pci 0000:02:00.0: bridge io port: [0x2000-0x2fff]
pci 0000:02:00.0: bridge 32bit mmio: [0xd0200000-0xd07fffff]
pci 0000:04:01.0: reg 10 32bit mmio: [0xd0801000-0xd0801fff]
pci 0000:04:01.0: reg 14 32bit mmio: [0xd0800000-0xd0800fff]
pci 0000:04:02.0: reg 10 64bit mmio: [0xd0820000-0xd083ffff]
pci 0000:04:02.0: reg 20 io port: [0x3000-0x303f]
pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
pci 0000:04:02.0: PME# disabled
pci 0000:04:02.1: reg 10 64bit mmio: [0xd0840000-0xd085ffff]
pci 0000:04:02.1: reg 20 io port: [0x3040-0x307f]
pci 0000:04:02.1: PME# supported from D0 D3hot D3cold
pci 0000:04:02.1: PME# disabled
pci 0000:02:00.2: bridge io port: [0x3000-0x3fff]
pci 0000:02:00.2: bridge 32bit mmio: [0xd0800000-0xd08fffff]
pci 0000:05:00.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:05:00.0: reg 14 io port: [0x4000-0x40ff]
pci 0000:05:00.0: reg 18 32bit mmio: [0xd0900000-0xd090ffff]
pci 0000:05:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.1: reg 10 32bit mmio: [0xd0910000-0xd091ffff]
pci 0000:05:00.1: supports D1 D2
pci 0000:00:04.0: bridge io port: [0x4000-0x4fff]
pci 0000:00:04.0: bridge 32bit mmio: [0xd0900000-0xd09fffff]
pci 0000:00:04.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
pci 0000:06:02.0: reg 10 32bit mmio: [0xd0a00000-0xd0a0ffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xd0a00000-0xd0afffff]
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:24d0]
PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1d.1: PCI->APIC IRQ transform: INT B -> IRQ 19
pci 0000:00:1d.2: PCI->APIC IRQ transform: INT C -> IRQ 18
pci 0000:00:1d.3: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:1d.7: PCI->APIC IRQ transform: INT D -> IRQ 23
pci 0000:00:1f.2: PCI->APIC IRQ transform: INT A -> IRQ 18
pci 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 17
pci 0000:00:1f.5: PCI->APIC IRQ transform: INT B -> IRQ 17
pci 0000:03:03.0: PCI->APIC IRQ transform: INT A -> IRQ 28
pci 0000:04:01.0: PCI->APIC IRQ transform: INT A -> IRQ 48
pci 0000:04:02.0: PCI->APIC IRQ transform: INT A -> IRQ 54
pci 0000:04:02.1: PCI->APIC IRQ transform: INT B -> IRQ 55
pci 0000:05:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:06:02.0: PCI->APIC IRQ transform: INT A -> IRQ 20
Switching to clocksource tsc
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: disabled
pci 0000:00:02.0: MEM window: disabled
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: 0x2000-0x2fff
pci 0000:02:00.0: MEM window: 0xd0200000-0xd07fffff
pci 0000:02:00.0: PREFETCH window: disabled
pci 0000:02:00.2: PCI bridge, secondary bus 0000:04
pci 0000:02:00.2: IO window: 0x3000-0x3fff
pci 0000:02:00.2: MEM window: 0xd0800000-0xd08fffff
pci 0000:02:00.2: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: 0x2000-0x3fff
pci 0000:00:03.0: MEM window: 0xd0100000-0xd08fffff
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:04.0: PCI bridge, secondary bus 0000:05
pci 0000:00:04.0: IO window: 0x4000-0x4fff
pci 0000:00:04.0: MEM window: 0xd0900000-0xd09fffff
pci 0000:00:04.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xd0a00000-0xd0afffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:02:00.0: setting latency timer to 64
pci 0000:02:00.2: setting latency timer to 64
pci 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 16
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0x2000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xd0100000-0xd08fffff]
pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xd0200000-0xd07fffff]
pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:04: resource 1 mem: [0xd0800000-0xd08fffff]
pci_bus 0000:05: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:05: resource 1 mem: [0xd0900000-0xd09fffff]
pci_bus 0000:05: resource 2 pref mem [0xd8000000-0xdfffffff]
pci_bus 0000:06: resource 1 mem: [0xd0a00000-0xd0afffff]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
pci 0000:05:00.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 1887k freed
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1262785485.289:1): initialized
I-pipe: Domain Xenomai registered.
Xenomai: hal/i386 started.
Xenomai: scheduling class idle registered.
Xenomai: scheduling class rt registered.
Xenomai: real-time nucleus v2.5.0 (Flying In A Blue Dream) loaded.
msgmni has been set to 1767
io scheduler noop registered
io scheduler deadline registered (default)
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:04.0: setting latency timer to 64
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 308k freed
input: AT Translated Set 2 keyboard as /class/input/input0
NET: Registered protocol family 1
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:04:02.0: PCI->APIC IRQ transform: INT A -> IRQ 54
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI->APIC IRQ transform: INT A -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18f0 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18f8 irq 15
sata_mv 0000:03:03.0: version 1.28
sata_mv 0000:03:03.0: PCI->APIC IRQ transform: INT A -> IRQ 28
sata_mv 0000:03:03.0: Gen-II 32 slots 8 ports SCSI mode IRQ via INTx
scsi2 : sata_mv
scsi3 : sata_mv
scsi4 : sata_mv
scsi5 : sata_mv
scsi6 : sata_mv
scsi7 : sata_mv
scsi8 : sata_mv
scsi9 : sata_mv
ata3: SATA max UDMA/133 mmio m1048...@0xd0200000 port 0xd0222000 irq 28
ata4: SATA max UDMA/133 mmio m1048...@0xd0200000 port 0xd0224000 irq 28
ata5: SATA max UDMA/133 mmio m1048...@0xd0200000 port 0xd0226000 irq 28
ata6: SATA max UDMA/133 mmio m1048...@0xd0200000 port 0xd0228000 irq 28
ata7: SATA max UDMA/133 mmio m1048...@0xd0200000 port 0xd0232000 irq 28
ata8: SATA max UDMA/133 mmio m1048...@0xd0200000 port 0xd0234000 irq 28
ata9: SATA max UDMA/133 mmio m1048...@0xd0200000 port 0xd0236000 irq 28
ata10: SATA max UDMA/133 mmio m1048...@0xd0200000 port 0xd0238000 irq 28
ata2.00: ATA-7: HDT722525DLA380, V44OA96A, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: ATAPI: SONY DVD RW DW-Q30A, YYS2, max UDMA/66
ata1.00: limited to UDMA/33 due to 40-wire cable
ata2.01: ATA-8: ST31000333AS, CC1H, max UDMA/133
ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM SONY DVD RW DW-Q30A YYS2 PQ: 0 ANSI: 5
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
ata2.01: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access ATA ST31000333AS CC1H PQ: 0 ANSI: 5
sd 1:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sda:
e1000: 0000:04:02.0: e1000_probe: (PCI:33MHz:64-bit) 00:30:48:2e:94:b6
sda1 sda2 <
sd 1:0:1:0: [sdb] Attached SCSI disk
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000 0000:04:02.1: PCI->APIC IRQ transform: INT B -> IRQ 55
sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
e1000: 0000:04:02.1: e1000_probe: (PCI:33MHz:64-bit) 00:30:48:2e:94:b7
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdc: sdc1 sdc2 sdc3
sd 3:0:0:0: [sdc] Attached SCSI disk
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: ST32000542AS, CC34, max UDMA/133
ata5.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 4:0:0:0: [sdd] Write Protect is off
sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdd: sdd1
sd 4:0:0:0: [sdd] Attached SCSI disk
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: ST3120813AS, 2AAA, max UDMA/133
ata6.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA ST3120813AS 2AAA PQ: 0 ANSI: 5
sd 5:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 5:0:0:0: [sde] Write Protect is off
sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sde: sde1 sde2 sde3
sd 5:0:0:0: [sde] Attached SCSI disk
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-7: ST3120813AS, 2AAA, max UDMA/133
ata8.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA ST3120813AS 2AAA PQ: 0 ANSI: 5
sd 7:0:0:0: [sdf] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdf: sdf1 sdf2 sdf3
sd 7:0:0:0: [sdf] Attached SCSI disk
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
Uniform Multi-Platform E-IDE driver
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
udevd version 125 started
Xenomai: SMI-enabled chipset found
Xenomai: SMI workaround enabled
Xenomai: starting RTDM services.
Analogy: MITE: Available NI device IDs: 0x1880
Analogy: a4l_add_drv: name=analogy_8255
Analogy: a4l_lct_drv: name=analogy_8255
Analogy: a4l_add_drv: name=analogy_ni_pcimio
Analogy: a4l_lct_drv: name=analogy_ni_pcimio
Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k
EXT3 FS on sda1, internal journal
Xenomai: starting native API services.
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
Analogy: a4l_rt_open: minor=0
Analogy: a4l_rt_ioctl: minor=0
Analogy: a4l_ioctl_devcfg: minor=0
Analogy: a4l_presetup_transfer: minor=0
Analogy: a4l_device_attach: minor=0
Analogy: a4l_fill_lnkdesc: minor=0
Analogy: a4l_lct_drv: name=analogy_ni_pcimio
Analogy: a4l_assign_driver: minor=0
Analogy: analogy_ni_pcimio: pcimio_attach: found pci-6711 board
mite 0000:04:01.0: PCI->APIC IRQ transform: INT A -> IRQ 48
mite 0000:04:01.0: setting latency timer to 64
Analogy: MITE: 0xd0801000 mapped to f8e26000
Analogy: DAQ: 0xd0800000 mapped to f8e2a000
Analogy: MITE: version = 1, type = 1, mite mode = 1, interface mode = 3
Analogy: MITE: num channels = 3, write post fifo depth = 1, wins = 0, iowins = 2
Analogy: analogy_ni_pcimio: pcimio_attach: found irq 48
Analogy: analogy_ni_pcimio: mio_common: starting attach procedure...
Analogy: analogy_ni_pcimio: mio_common: registering AI subdevice...
Analogy: analogy_ni_pcimio: mio_common: AI subdevice not present
Analogy: analogy_ni_pcimio: mio_common: AI subdevice registered
Analogy: analogy_ni_pcimio: mio_common: registering AO subdevice...
Analogy: analogy_ni_pcimio: mio_common: AO: 4 channels
Analogy: analogy_ni_pcimio: mio_common: AO subdevice registered
BUG: unable to handle kernel NULL pointer dereference at 00000004
IP: [<f8c73162>] ni_E_init+0x368/0x1565 [analogy_ni_mio]
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/class/net/lo/operstate
Modules linked in: xeno_native analogy_ni_pcimio analogy_ni_mio analogy_ni_tio
analogy_8255 analogy_ni_mite xeno_analogy xeno_rtdm ext3 jbd mbcache
ide_pci_generic ide_core sata_mv ata_piix e1000 libata unix [last unloaded:
scsi_wait_scan]
Pid: 3705, comm: analogy_config Not tainted (2.6.32.2 #1) X6DA8
EIP: 0060:[<f8c73162>] EFLAGS: 00010202 CPU: 0
EIP is at ni_E_init+0x368/0x1565 [analogy_ni_mio]
EAX: 00000000 EBX: f8a15280 ECX: f8c24d80 EDX: 0094e000
ESI: c0c00380 EDI: f8c24d80 EBP: f6be3e18 ESP: f6be3db8
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process analogy_config (pid: 3705, ti=f6be2000 task=f78767d0 task.ti=f6be2000)
I-pipe domain Linux
Stack:
f8c75554 f8c864f9 00000004 f8a00a5d f8c24d80 00000000 00000001 f8c24db4
<0> fffffff0 f6be3df4 f8c204b0 00000001 f8c23f35 f8c24da8 f8c24d80 f6be3e18
<0> f8c210af 00000001 f8c24d80 00000030 00000000 00000030 c0c00380 c0c003a0
Call Trace:
[<f8a00a5d>] ? rtdm_irq_request+0x48/0x5e [xeno_rtdm]
[<f8c204b0>] ? __a4l_request_irq+0x33/0x39 [xeno_analogy]
[<f8c210af>] ? a4l_request_irq+0x98/0xaf [xeno_analogy]
[<f8c85d8a>] ? pcimio_attach+0x54d/0x664 [analogy_ni_pcimio]
[<f8c1f26c>] ? a4l_assign_driver+0x81/0x170 [xeno_analogy]
[<f8c1f592>] ? a4l_device_attach+0x74/0x8d [xeno_analogy]
[<f8c1f843>] ? a4l_ioctl_devcfg+0x73/0x11c [xeno_analogy]
[<f8c217ef>] ? a4l_rt_ioctl+0x4f/0x56 [xeno_analogy]
[<f89ff3e6>] ? __rt_dev_ioctl+0xd1/0xd8 [xeno_rtdm]
[<f8a01e77>] ? sys_rtdm_open+0x5c/0x64 [xeno_rtdm]
[<f8a01dde>] ? sys_rtdm_ioctl+0x29/0x2b [xeno_rtdm]
[<c106c584>] ? losyscall_event+0xa7/0x2c7
[<c105925e>] ? __ipipe_dispatch_event+0xdf/0x201
[<c106c4dd>] ? losyscall_event+0x0/0x2c7
[<c10169f1>] ? __ipipe_syscall_root+0x3b/0xc4
[<c1002d7d>] ? system_call+0x2d/0x4f
Code: 8b 50 10 89 54 24 04 c7 04 24 54 55 c7 f8 e8 8a 30 55 c8 8b 4d b0 8b 81
74 01 00 00 8b 00 f6 40 3c 06 0f 84 c9 00 00 00 8b 41 18 <8b> 40 04 89 45 bc 8b
40 14 8b 40 04 85 c0 0f 84 b2 00 00 00 31
EIP: [<f8c73162>] ni_E_init+0x368/0x1565 [analogy_ni_mio] SS:ESP 0068:f6be3db8
CR2: 0000000000000004
---[ end trace 4ab8cafb94eb805d ]---
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
Analogy: a4l_rt_close: minor=0
_______________________________________________
Xenomai-help mailing list
Xenomai-help@gna.org
https://mail.gna.org/listinfo/xenomai-help
