Hello,
I just installed Xenomai 2.5.1, however, I am having the exact same problem
- the computer completely crashes when running analogy_config analogy0
analogy_ni_pcimio. However, I could not get any significant debug info
before the system crashes.
This is the exact behavior I had with Xenomai 2.5.0.
I am running Ubuntu 9.04 on a with a AMD Sempron 2800+ with a National
Instruments 6221-37 DAQ card. Xenomai seems to be running pretty well.
So, is this a known issue? Can I help with the debug messages/logs in any
way?
Thanks for the help,
-Felipe Brandão Cavalcanti
(Sorry to reply to such an old thread.. but my problem seemed a lot like
this one.)
On Fri, Jan 8, 2010 at 9:14 AM, Ettore Pedretti <epedr...@gmail.com> wrote:
> Hi,
>
> I started from scratch by rebooting the system.
>
> analogy_config analogy0 analogy_ni_pcimio
>
> insn_write (no output)
>
> Relevant error trace:
> Analogy: a4l_rt_open: minor=0
> Analogy: a4l_rt_ioctl: minor=0
> Analogy: a4l_ioctl_devcfg: minor=0
> Analogy: a4l_presetup_transfer: minor=0
> Analogy: a4l_device_attach: minor=0
> Analogy: a4l_fill_lnkdesc: minor=0
> Analogy: a4l_lct_drv: name=analogy_ni_pcimio
> Analogy: a4l_assign_driver: minor=0
> Analogy: analogy_ni_pcimio: pcimio_attach: found pci-6711 board
> mite 0000:04:01.0: PCI->APIC IRQ transform: INT A -> IRQ 48
> mite 0000:04:01.0: setting latency timer to 64
> Analogy: MITE: 0xd0801000 mapped to f8e26000
> Analogy: DAQ: 0xd0800000 mapped to f8e2a000
> Analogy: MITE: version = 1, type = 1, mite mode = 1, interface mode = 3
> Analogy: MITE: num channels = 3, write post fifo depth = 1, wins = 0,
> iowins = 2
> Analogy: analogy_ni_pcimio: pcimio_attach: found irq 48
> Analogy: analogy_ni_pcimio: mio_common: starting attach procedure...
> Analogy: analogy_ni_pcimio: mio_common: registering AI subdevice...
> Analogy: analogy_ni_pcimio: mio_common: AI subdevice not present
> Analogy: analogy_ni_pcimio: mio_common: AI subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering AO subdevice...
> Analogy: analogy_ni_pcimio: mio_common: AO: 4 channels
> Analogy: analogy_ni_pcimio: mio_common: AO subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering DIO subdevice...
> Analogy: analogy_ni_pcimio: mio_common: DIO: 8 channels
> Analogy: analogy_ni_pcimio: mio_common: DIO subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering 8255 subdevice...
> Analogy: analogy_ni_pcimio: mio_common: 8255 subdevice not present
> Analogy: analogy_ni_pcimio: mio_common: 8255 subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering calib subdevice...
> Analogy: analogy_ni_pcimio: mio_common: calib: common calibration
> Analogy: analogy_ni_pcimio: mio_common: calib subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering EEPROM subdevice...
> Analogy: analogy_ni_pcimio: mio_common: EEPROM: size = 512
> Analogy: analogy_ni_pcimio: mio_common: EEPROM subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering PFI(DIO) subdevice...
> Analogy: analogy_ni_pcimio: mio_common: PFI: 10 bits...
> Analogy: analogy_ni_pcimio: mio_common: PFI subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering serial subdevice...
> Analogy: analogy_ni_pcimio: mio_common: serial subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering GPCT[0] subdevice...
> Analogy: analogy_ni_pcimio: mio_common: GPCT[0]: 24 bits
> Analogy: analogy_ni_pcimio: mio_common: GPCT[0]: command feature available
> Analogy: analogy_ni_pcimio: mio_common: GCPT[0] subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering GPCT[1] subdevice...
> Analogy: analogy_ni_pcimio: mio_common: GPCT[1]: 24 bits
> Analogy: analogy_ni_pcimio: mio_common: GPCT[1]: command feature available
> Analogy: analogy_ni_pcimio: mio_common: GCPT[1] subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: registering counter subdevice...
> Analogy: analogy_ni_pcimio: mio_common: counter subdevice registered
> Analogy: analogy_ni_pcimio: mio_common: initializing AI...
> Analogy: analogy_ni_pcimio: mio_common: AI initialization OK
> Analogy: analogy_ni_pcimio: mio_common: initializing A0...
> Analogy: analogy_ni_pcimio: mio_common: A0 initialization OK
> Analogy: analogy_ni_pcimio: mio_common: DMA setup
> Analogy: analogy_ni_pcimio: mio_common: attach procedure complete
> Analogy: a4l_free_lnkdesc: minor=0
> Analogy: a4l_setup_transfer: minor=0
> Analogy: a4l_rt_close: minor=0
> Analogy: a4l_rt_open: minor=0
> Analogy: a4l_rt_ioctl: minor=0
> Analogy: a4l_ioctl_devinfo: minor=0
> Analogy: a4l_rt_ioctl: minor=0
> ---------------> snip <-----------------
> Analogy: a4l_rt_ioctl: minor=0
> Analogy: a4l_rt_ioctl: minor=0
> Analogy: a4l_reserve_transfer: minor=0 idx=1
> Analogy: a4l_rt_close: minor=0
>
> Then typed:
> cmd_write
> cmd_write: triggering failed (ret=-16)
>
> error trace:
>
> Analogy: a4l_rt_open: minor=0
> Analogy: a4l_rt_ioctl: minor=0
> ---------------> snip <-----------------
> Analogy: a4l_rt_ioctl: minor=0
> Analogy: a4l_rt_ioctl: minor=0
> Analogy: a4l_ioctl_cancel: subdevice currently idle
> Analogy: a4l_rt_ioctl: minor=0
> Analogy: a4l_ioctl_cmd: minor=0
> Analogy: a4l_fill_cmddesc: desc dump
> Analogy: ->idx_subd=1
> Analogy: ->flags=0
> Analogy: ->nb_chan=2
> Analogy: ->chan_descs=0x0
> Analogy: ->data_len=0
> Analogy: ->pdata=0x(null)
> Analogy: a4l_check_cmddesc: minor=0
> Analogy: a4l_ioctl_cmd: 1st cmd checks passed
> Analogy: a4l_ioctl_cmd: driver's cmd checks passed
> Analogy: a4l_reserve_transfer: minor=0 idx=1
> Analogy: a4l_init_transfer: minor=0 idx=1
> Analogy: a4l_rt_write: minor=0
> Analogy: a4l_rt_ioctl: minor=0
> Analogy: analogy_ni_pcimio: ni_request_ao_mite_channel: failed to
> reserve mite dma channel for analog outut.
> Analogy: a4l_rt_close: minor=0
>
> Hope this helps
> Ettore
>
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@gna.org
> https://mail.gna.org/listinfo/xenomai-help
>
--
-Felipe Brandão Cavalcanti
LARA - Robotics and Automation Laboratory
Department of Electrical Engineering
UnB - University of Brasília, Brazil
http://www.lara.unb.br/~fbcavalcanti/
_______________________________________________
Xenomai-help mailing list
Xenomai-help@gna.org
https://mail.gna.org/listinfo/xenomai-help
