On 04/17/2012 01:30 PM, Gilles Chanteperdrix wrote: > On 04/17/2012 01:11 PM, Anisha Kaul wrote: >> Greetings, >> >> The hackbench command I issued is as follows: _______________________________ >> >> /usr/xenomai/bin/xeno-test -l "dohell -b ./hackbench -pipe 100 process 100" > > You do not use dohell properly. The syntax for running dohell is > detailed below > >> /usr/xenomai/bin/dohell [ -b path ] [ -s server ] [ -p port ] [ -m >> mntpoint ] [ -l path | seconds ] >> >> Generate load, using an assorted set of commands and optionnaly: >> - hackbench if the path to the hackbench binary is specified with -b; >> - nc to send TCP data to "server" port "port" if -s is specified (if -p >> is not specified, the port 9, aka discard is used); >> - dd to write data under "mntpoint" if -m is specified. >> >> during the runtime of the LTP test if the path to the LTP installation >> directory is specifed with -l or during "seconds" seconds. >
Ok, it is not clear: but you need to pass a duration if you do not pass the patch to LTP, which means either the "-l path" or "seconds" argument is mandatory. -- Gilles. _______________________________________________ Xenomai-help mailing list Xenomai-help@gna.org https://mail.gna.org/listinfo/xenomai-help