On 04/18/2012 11:09 AM, Anisha Kaul wrote: > On 18 April 2012 14:11, Gilles Chanteperdrix > <gilles.chanteperd...@xenomai.org> wrote: >> Try: xeno-test -l "dohell -b >> /home/anisha/Desktop/RealTime/downloadedPages/hackbench 14400" > > and that worked! I tried it with 2 seconds.
You will not obtain the worst case latencies by running the test for 2 seconds, you have to let xeno-test run at least a few hours. > > I realize now that the problem is in the "parameters" which I specify > with hackbench: > > xeno-test -l "dohell -b > /home/anisha/Desktop/RealTime/downloadedPages/hackbench -pipe 100 > process 100 2" > > The sub `dohell` command (with hackbench parameters) work well, but it > doesn't work when attached with `xeno-test`. I remove the hackbench's > parameters ("-pipe 100 process 100"), then it starts working. > > Thanks for your help, but what should I do if I want those parameters? > Hardcoding them in the hackbench's code as a temporary solution? Or I > am still missing a point? As of now, the simplest way is to hardcode them in the dohell script. -- Gilles. _______________________________________________ Xenomai-help mailing list Xenomai-help@gna.org https://mail.gna.org/listinfo/xenomai-help