On Thu, 20 Feb 2003, mel kravitz wrote:

> I am coming in here late, what does XF86Config file 'screen' section
> say? This is a laptop? I assummed from your /var/log/XFree86.0.log file
> you were using the 'radeon' driver. You can of course try it.

        Switching ati to radeon gives the same failure.

> i see from this file :(XFree86.0.log), "XF86Config.new log"
> ---->
> II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> 0x0000
> (II) RADEON(0): PCI bus 1 card 0 func 0
> (==) RADEON(0): Depth 8, (==) framebuffer bpp 8
> (II) RADEON(0): Pixel depth = 8 bits stored in 1 byte (8 bpp pixmaps)
> (==) RADEON(0): Default visual is PseudoColor
> (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
> ---> you set this to run in 'Default Depth 8'?

        Its the default xf86cfg generated file - adding 'DefaultDepth 24'
        still chokes.

        Thanks for the suggestions :/

            Section "Screen"
                    Identifier "Screen0"
                    Device     "Card0"
                    Monitor    "Monitor0"
                    DefaultDepth     24
                    SubSection "Display"
                            Depth     1
                    EndSubSection
                    SubSection "Display"
                            Depth     4
                    EndSubSection
                    SubSection "Display"
                            Depth     8
                    EndSubSection
                    SubSection "Display"
                            Depth     15
                    EndSubSection
                    SubSection "Display"
                            Depth     16
                    EndSubSection
                    SubSection "Display"
                            Depth     24
                    EndSubSection
            EndSection


(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.2.99.902, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.2.99.902, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): initializing int10
(WW) RADEON(0): remove MTRR a0000 - c0000
(WW) RADEON(0): set MTRR c0000 - 100000
(WW) RADEON(0): Bad V_BIOS checksum
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(WW) RADEON(0): remove MTRR 0 - 1000
(--) RADEON(0): Chipset: "ATI Radeon Mobility M9 Lf (AGP)" (ChipID = 0x4c66)
(--) RADEON(0): Linear framebuffer at 0x88000000
(--) RADEON(0): MMIO registers at 0x80380000
(WW) RADEON(0): remove MTRR 80380000 - 80400000
(--) RADEON(0): VideoRAM: 65536 kByte (64-bit DDR SDRAM)
(WW) RADEON(0): remove MTRR 80380000 - 80400000
(II) RADEON(0): CloneDisplay option not set -- defaulting to auto-detect
(II) RADEON(0): Primary Display == Type 2
(II) RADEON(0): Panel ID string: <FF><FF><FF><FF><FF><FF><FF><FF><FF><FF><FF>
<FF><FF><FF><FF><FF><FF><FF><FF><FF><FF><FF><FF><FF>
(II) RADEON(0): Panel Size from BIOS: 65535x65535
Symbol xf86SetDDCproperties from module /usr/X11R6/lib/modules/drivers/radeon_dr
v.o is unresolved!


-- 
                David Brownlee - CTO Purple Interactive - (0)20 8742 8880
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to