Looks like the int10 initialization routine is not happy with your system
and resulting in corrupted video BIOS image.
Can you try following two things together and post the resulting log file?

1. Comment off following 3 lines in radeon_driver.c.

if (!info->FBDev)
 if (!RADEONPreInitInt10(pScrn, &pInt10))
     goto fail;

This will let driver bypass int10 initialization and use the legacy vbios
location directly.
Then do a "make install" in ati directory.

2. in the Screen section of your config file add
DefaultDepth 24
in the corresponding Display SubSection (Depth 24) add
Modes "1600x1200" or whatever mode your panel supports.

Hopefully these can narrow things down a bit.

Hui

> On Thu, 20 Feb 2003, mel kravitz wrote:
>
> > I am coming in here late, what does XF86Config file 'screen' section
> > say? This is a laptop? I assummed from your /var/log/XFree86.0.log file
> > you were using the 'radeon' driver. You can of course try it.
>
> Switching ati to radeon gives the same failure.
>
> > i see from this file :(XFree86.0.log), "XF86Config.new log"
> > ---->
> > II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
> > 0x0000
> > (II) RADEON(0): PCI bus 1 card 0 func 0
> > (==) RADEON(0): Depth 8, (==) framebuffer bpp 8
> > (II) RADEON(0): Pixel depth = 8 bits stored in 1 byte (8 bpp pixmaps)
> > (==) RADEON(0): Default visual is PseudoColor
> > (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
> > ---> you set this to run in 'Default Depth 8'?
>
> Its the default xf86cfg generated file - adding 'DefaultDepth 24'
> still chokes.
>
> Thanks for the suggestions :/
>
>     Section "Screen"
>     Identifier "Screen0"
>     Device     "Card0"
>     Monitor    "Monitor0"
>     DefaultDepth     24
>     SubSection "Display"
>     Depth     1
>     EndSubSection
>     SubSection "Display"
>     Depth     4
>     EndSubSection
>     SubSection "Display"
>     Depth     8
>     EndSubSection
>     SubSection "Display"
>     Depth     15
>     EndSubSection
>     SubSection "Display"
>     Depth     16
>     EndSubSection
>     SubSection "Display"
>     Depth     24
>     EndSubSection
>     EndSection
>
>
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
>         compiled for 4.2.99.902, module version = 0.1.0
>         ABI class: XFree86 Video Driver, version 0.6
> (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
> (II) RADEON(0): PCI bus 1 card 0 func 0
> (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
> (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
> (==) RADEON(0): Default visual is TrueColor
> (==) RADEON(0): RGB weight 888
> (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/X11R6/lib/modules/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
>         compiled for 4.2.99.902, module version = 1.0.0
>         ABI class: XFree86 Video Driver, version 0.6
> (II) RADEON(0): initializing int10
> (WW) RADEON(0): remove MTRR a0000 - c0000
> (WW) RADEON(0): set MTRR c0000 - 100000
> (WW) RADEON(0): Bad V_BIOS checksum
> (II) RADEON(0): Primary V_BIOS segment is: 0xc000
> (WW) RADEON(0): remove MTRR 0 - 1000
> (--) RADEON(0): Chipset: "ATI Radeon Mobility M9 Lf (AGP)" (ChipID =
0x4c66)
> (--) RADEON(0): Linear framebuffer at 0x88000000
> (--) RADEON(0): MMIO registers at 0x80380000
> (WW) RADEON(0): remove MTRR 80380000 - 80400000
> (--) RADEON(0): VideoRAM: 65536 kByte (64-bit DDR SDRAM)
> (WW) RADEON(0): remove MTRR 80380000 - 80400000
> (II) RADEON(0): CloneDisplay option not set -- defaulting to auto-detect
> (II) RADEON(0): Primary Display == Type 2
> (II) RADEON(0): Panel ID string:
<FF><FF><FF><FF><FF><FF><FF><FF><FF><FF><FF>
> <FF><FF><FF><FF><FF><FF><FF><FF><FF><FF><FF><FF><FF>
> (II) RADEON(0): Panel Size from BIOS: 65535x65535
> Symbol xf86SetDDCproperties from module
/usr/X11R6/lib/modules/drivers/radeon_dr
> v.o is unresolved!
>
>
> --
> David Brownlee - CTO Purple Interactive - (0)20 8742 8880
> _______________________________________________
> XFree86 mailing list
> [EMAIL PROTECTED]
> http://XFree86.Org/mailman/listinfo/xfree86
>

_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86

Reply via email to