On Fri, Mar 07, 2003 at 11:47:27AM -0500, Jesse Burkhardt wrote: > The DacSpeed entry had no effect. (I tried it on your first > recommendation.)
Hmm... Then it'll make a lot of sense to send the complete XFree86.0.log, otherwise it'll be blind guessing. > I have also tried changing my sync/refresh rates from > > HorizSync 30.0 - 115.0 > VertRefresh 50.0 - 160.0 > > to > > HorizSync 30.0 - 90.0 > VertRefresh 55.0 - 85.0 > > as suggested by someone else in the group (to no effect). You've changed the allowed range, the actual values are chosen by the server. I'd try figuring out what the server decided to use from XFree86.0.log. Besides with monitor's own controls you can find out what the actual frequencies are. Still for XF86Config better look these ranges up in the monitor manual or on the manufacturer's site. > FYI also: > > [gemini]# grep -i 'clock range' /var/log/XFree86.0.log > (II) I810(0): Clock range: 12.00 to 230.00 MHz Have you got this after setting the DacSpeed or before :) ? Roman. _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
