On Fri, Mar 07, 2003 at 12:52:48PM -0500, Jesse Burkhardt wrote:
> As for DacSpeed, I got this clock range (12.00 to 230.00 MHz) after
> setting DacSpeed, before setting it I got 12.00 to 163.00 MHz.
Right - you switched to 16 bpp color depth first :) 163 MHz is the
default i810 value for this depth.
> I have also reset the sync/refresh rages to their original values, which
> the following logfile should reflect.
Indeed.
> And here is the entire /var/log/XFree86.0.log - thanks again:
I must admit I don't immediately see anything wrong with it. My only
suspect is the 1280x960 mode - it's not a VESA mode, and it may well be
that the Xserver now chooses slightly different timings then your
previous system did, and the monitor "doesn't like" these particular
ones.
So I suggest trying one of the following:
1) use 1280x1024 mode: it's quite standard, and most likely the monitor
has been factory tested for it
2) copy over the timings from your former system
3) (wild) search for a source of electromagnetic interference and move
away from it (can be your UPS or speakers, etc. E.g. the floppy
drive in my box, standing half a meter away from the monitor,
clearly interferes with it when used).
Hope that'll help,
Roman.
_______________________________________________
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
