Cynthia, I (had already) updated to 4.3 (with no ostensible errors) before that log was written; that log should reflect that. ?
In any case, I installed rh8.0 last night in hopes of improved performance...now neither my monitor, its specs, or my card is recognized. Go figure. XF86Config log is attached if you are interested It can also be found: ftp.evl.uic.edu/OUTgoing/mgolter/xfree/ (where the older 7.3 xfree86.0.log is still available) Thanks for you help mgolter On Mon, 24 Mar 2003, Cynthia Grossen wrote: > Ma'am, > > You're using an out-of-date X version. Upgrade to 4.3. If you can't do that > try setting your color depth to 8 instead of 16. > > HTH, > cyn > > > -----Original Message----- > From: Sujith [mailto:[EMAIL PROTECTED] > Sent: Monday, March 24, 2003 2:19 AM > To: [EMAIL PROTECTED] > Subject: [XFree86] (no subject) > > > Sir, > > This is the error message when installed lred hat linux 7.1 on Intel PIV > 1.7Ghz . the XFree86 is not started and here is the problem cut and pasted > down below., > XFree86 Version 4.0.3 / X Window System > (protocol Version 11, revision 0, vendor release 6400) > Release Date: 16 March 2001 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/FAQ) > Operating System: Linux 2.2.17-8smp i686 [ELF] > Module Loader present > (==) Log file: "/var/log/XFree86.0.log", Time: Mon Mar 24 12:22:28 2003 > (==) Using config file: "/etc/X11/XF86Config-4" > > ABI class: XFree86 Video Driver, version 0.3 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1106,3148 card 1106,0000 rev 00 class 06,00,00 hdr > 00 > (II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr > 01 > (II) PCI: 00:09:0: chip 14f1,2f00 card 14f1,2004 rev 01 class 07,80,00 hdr > 00 > (II) PCI: 00:11:0: chip 1106,3074 card 1106,0000 rev 00 class 06,01,00 hdr > 80 > (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr > 00 > (II) PCI: 00:11:2: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr > 00 > (II) PCI: 00:11:3: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr > 00 > (II) PCI: 00:11:4: chip 1106,3038 card 0925,1234 rev 1b class 0c,03,00 hdr > 00 > (II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 30 class 04,01,00 hdr > 00 > (II) PCI: 01:00:0: chip 5333,8d04 card 5333,8d04 rev 00 class 03,00,00 hdr > 00 > (II) PCI: End of PCI scan > > (--) PCI:*(1:0:0) S3 unknown chipset (0x8d04) rev 0, Mem @ 0xdfe80000/19, > 0xd0000000/27 > > (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic > (II) Primary Device is: PCI 01:00:0 > (--) Assigning device section with no busID to primary device > (--) Chipset generic found > > (II) Setting vga for screen 0. > (EE) VGA(0): Given depth (16) is not supported by this driver. > (II) UnloadModule: "vga" > (EE) Screen(s) found, but none have a usable configuration. > Fatal server error: > no screens found > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to [EMAIL PROTECTED] > _______________________________________________ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 >
#!/bin/sh python2.2 /usr/share/redhat-config-xfree86/xconf.py $@
