Okay, I got my ATI Radeon 7500 QW (PCI) to work. Yay! Now I can't seem to get it to work at the same time as the ATI Rage IIc (AGP)...
xf86cfg displayed on both at the same time... When I type startx, I wind up with a (beautiful) display on only one head, the Radeon, but the Rage stays blank. startx -- -screen Secondary gives me a display on the Rage but not the Radeon. http://ioioio.net/XFree86.0.log http://ioioio.net/XFree86.0.log-4.3.0.1 http://ioioio.net/XF86Config I have the same problem with both 4.3.0 and 4.3.0.1 (downloaded earlier tonight). Go ahead; make a diff between the two logs... they're virtually the same except for some things that don't matter to me. I also tried with ati.2. Naturally, that didn't help anything. Somehow, it tries to use the radeon driver to drive the second card even though I say to use ati. Also, it says some other fishy stuff: (II) ATI: Candidate "Device" section "Rage". (II) ATI: Candidate "Device" section "Rage". (II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected. (EE) ATI: XF86Config Device secitons "Rage" and "Rage" may not be assigned to the same adapter. (WW) RADEON: More than one matching Device section for instances (BusID: PCI:1:0:0) found: Rage (--) Chipset ATI Radeon 7500 QW (AGP) found (WW) RADEON: Chipset "ati" in device section "Rage" isn't valid for this driver What gives? I'm also having problems getting DRI to work with the Radeon (I know it will never work for the Rage), but I didn't bother commenting that out of the configuration file since the xinerama option turns it off anyway. I'll deal with the DRI problem later after I fix xinerama. -- Andy Goth | [EMAIL PROTECTED] | http://ioioio.net/ End communication. _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
