This is fine when you have an external monitor with a lower possible resolution than the panel, but what do you do when you have a panel at 1024x768 and then an external display that you want to drive at 1280x1024? I used to be able to specify
Option "Display" "BIOS" but that no longer works. It defaults to the TFT no matter what I do. Thanks, Brian > Meanwhile, you have to remove "1400x1050" from your Modes line to prevent it > is used as virtual size for your external display. > > The internal panel is always connected and 1400x1050 is a valid mode for it > regardless if an external display is connected. Setting Virtual 1280 1024 > should prevent 1400x1050 mode in principle, the driver doesn't seem to > handle this correctly. PanelOff is currently only implemented to turn off > display, nothing to do with mode validation. The old driver worked the way > you described accidentally, may not be reliable/desired in other cases. > > Hui _______________________________________________ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
