On 31/10/2020 02:55, Andy Stewart wrote:
HI Barry,
The following stack worked for me:
* Andy's Ham Radio Linux, version 24c+ (my next dev release), which is
based on Ubuntu 18.04.*
* Xlog 2.0.19
* hamlib-4.0-rc2
* ICOM 7300 on /dev/ttyUSB0
* I started with a blank ~/.xlog directory.
* I started Xlog and reconfigured hamlib, taking care to choose the
updated rig number.
* When the POWER entry is listed in the QSO entry window, it will say
UNKNOWN if the rig power is set to 0, but otherwise, it reflected the
rig power setting. Try ctrl-Y ctrl-K for a quick erase/update of the
QSO entry window.
I was able to duplicate the condition of hamlib hanging xlog, but that
always happens when you turn off the rig with hamlib enabled and Xlog is
still running. Xlog eventually comes out of it. This isn't ideal, but
it is nothing new for Xlog, either. Turning the rig on again causes the
software to be happy again.
Let me know if you continue to have issues.
73,
Andy
Thanks Andy,
Sorry for the delay, been busy with other stuff.
The Hamlib daily snapshots are here:
http://n0nb.users.sourceforge.net/
I have been using these to keep up to date with the latest fixes etc. in
the hope that something would solve the problem which is also affecting
klog.
I will test new builds of xlog in a clean environment, and have noted
the rig number changes.
I will also play with rigctl, however wsjtx is working OK.
Barry