>As far as the bus stuff goes, the computer is a compactPCI. Not >sure if you're familiar with this, but basicallly its a different >pinout for the PCI bus for ruggedized computers.
Ahh yes, I read too quickly. I thought you said "Compaq"... the bus converter makes more sense now. >It doesn't seem that the brooktree and i815 ranges overlap >(but they're close.....). Looking at your logs again... they don't overlap even in the XFree output. It is difficult text to parse and I misread it. They are close but this isn't a problem. I looked into the pci scanning code and looked at the logs from some other i815's. They all have Bus -1 output for the ISA bridge. It probably isn't causing any problems, and may just be the result of having an ISA bridge but not using it for anything. It does seem that ScreenInit() is getting called twice on your system, you could try and track that down and find out why. Does XFree work when the brooktree card is plugged in, but the v4l module is NOT loaded in the XF86Config? -Matt _______________________________________________ Xpert mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xpert
