> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
> Of Josh Hogan
> Sent: Tuesday, March 19, 2002 7:25 PM
> To: [EMAIL PROTECTED]
> Subject: [Xpert]Xinerama Problem with XFree86 4.1.0
>
>
> Hello. I've recently been trying to get the Xinerama extensions with
> XFree86 4.1.0 (stock from Redhat 7.2 install, no updates) working. My
> computer is a P2 233, with two video cards:
>
> Onboard Matrox 1064SG, on the PCI bus
> Matrox 2064W PCI card in PCI slot
>
> If I use just the 1064SG onboard card, it works flawlessly. If I place
> the 2064W card in, it works flawlessly as well. So, I tried to setup
> the Xinerama extensions. It appears that I have the configuration file
> setup properly, but here is a copy of it (The 1064 card is labeled as
> Onboard, the 2064 is labeled as PCI)
The 2064W (original Millennium) has a vga enable/disable switch right on the
card. You may need to change the setting.
_______________________________________________
Xpert mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xpert
