Martin, I just tested your drivers on my SB1000 with an ffb. I'm apparently running Xorg at the moment -- very impressive :-). I'll test on my Tadpole with a PGX64 shortly.
What would be required for Xvideo support? (/usr/X11R6/bin/xvinfo returns no adapters) Derek E. Lewis delewis at acm.org http://delewis.blogspot.com On Sun, 22 Apr 2007, Martin Bochnig wrote: > #0.) > gzcat ./Xorg7.2.0_opensol_sparc_snv60_binary_pkgs.tar.gz | /bin/tar xvf - > > #1.) > yes | pkgadd -d . SUNW* > > #2.) > Do not install the aperture driver (or remove it, if present), if you have a > UPA Creator, > Creator3D or Elite 3D board using the sunffb module, otherwise be sure to > install aperture > (for all PCI fb's). > If you had to (un-)install aperture, perform reconfiguration boot. > Just running devfsadm or update_drv is not enough. > > #3.) > Choose "Command line" from dtlogin to perform a few tests > > #n.) > IF everything works smoothly for your config, you may decide to use Xorg > forever: > # /etc/init.d/dtlogin stop > # svccfg -s x11-server > svc:/application/x11/x11-server > svc:/application/x11/x11-server> setprop options/default_depth=24 > svc:/application/x11/x11-server> setprop options/server=/usr/X11/bin/Xorg > svc:/application/x11/x11-server> exit > # > > > Has Mesa OpenGL libs, has glx support compiled into the server > Has almost everything, what x86 version has, i.e. all the input drivers. > My Type7 mouse's wheel does also work. > > Some endianness related color problems with PGX32, but one can live with them. > Fix should be easy. > But first the global diffs etc. > > Martin > > > This message posted from opensolaris.org > _______________________________________________ > xwin-discuss mailing list > xwin-discuss at opensolaris.org >
