On Mon, 2021-11-01 at 21:50 +0100, Josef Holzmayr wrote: > (re-adding list as I messed up) > > Am Mo., 1. Nov. 2021 um 21:45 Uhr schrieb jchludzinski > <[email protected]>: > > > > I want to build this image for a Raspberry Pi, which means ARM. > > MACHINE = "raspberrypi3" > (for example, pick your specific one like > http://git.yoctoproject.org/cgit/cgit.cgi/meta-raspberrypi/tree/conf/machine > ) > > > Is that not possible? > > > > That can't be true! > > Building the SDK for an architecture other than x86 is not supported > at the moment.
Not quite true, aarch64 is supported and tested as an SDKMACHINE value. > But again, this is about the SDK. And you probably just > want to build the image, where the standard procedures apply. Add the > BSP layer, set MACHINE. Right, this sounds like MACHINE is wanted for raspberrypi. Cheers, Richard
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#55206): https://lists.yoctoproject.org/g/yocto/message/55206 Mute This Topic: https://lists.yoctoproject.org/mt/86733811/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
