On Sat, Apr 2, 2022 at 9:37 AM jchludzinski <[email protected]> wrote: > > I’m actually trying this on an RP4 running Raspbian. >
Oh I see. we do support aarch64 as build host, so if you are trying 64bit OS on rpi then it should work although, rpi4 may not have enough muscle to build, perhaps using SSD with rpi4 might help a bit So find out if rpi4 is running in 64bit mode if not then building on armv7 might have issues. in anycase try setting SDKMACHINE = "i686" this should get you past this particular error, there might be more after it. Fixed when x11 is not in DISTRO_FEATURES: $ bitbake wxwidgets ERROR: Nothing PROVIDES 'wxwidgets' wxwidgets was skipped: missing required distro feature 'x11' (not in DISTRO_FEATURES) > On 2022-04-02 12:15, Khem Raj wrote: > > On Sat, Apr 2, 2022 at 1:47 AM jchludzinski <[email protected]> > > wrote: > >> > >> $ git clone git://git.yoctoproject.org/poky.git > >> $ cd ./poky > >> $ git checkout yocto-3.4.2 > >> $ cd .. > >> $ source ./poky/oe-init-build-env > >> $ cd ./build > >> $ time bitbake core-image-minimal > >> ... > >> ERROR: OE-core's config sanity checker detected a potential > >> misconfiguration. > >> Either fix the cause of this error or at your own risk disable the > >> checker (see sanity.conf). > >> Following is the list of potential problems / advisories: > >> > >> Specified SDKMACHINE value is not valid > >> > >> > >> Summary: There was 1 WARNING message shown. > >> Summary: There was 1 ERROR message shown, returning a non-zero exit > >> code. > >> > >> ________________________________________________________ > >> Executed in 3.92 secs fish external > >> usr time 1.07 secs 9.77 millis 1.06 secs > >> sys time 0.18 secs 2.96 millis 0.17 secs > >> > >> > >> > >> On 2022-04-01 18:09, Khem Raj wrote: > >> > >> On Fri, Apr 1, 2022 at 2:02 PM jchludzinski <[email protected]> > >> wrote: > >> > >> > >> But obviously commented out. > >> > >> On 2022-04-01 16:43, jchludzinski via lists.yoctoproject.org wrote: > >> > >> There's this: > >> #SDKMACHINE ?= "i686" > >> > >> > >> OK it should be ok then. Can you describe your steps to setup the > >> system? > >> maybe there is some caveat > >> > >> > >> ---John > >> > >> On 2022-04-01 16:22, Khem Raj wrote: > >> > >> On Fri, Apr 1, 2022 at 1:09 PM jchludzinski via > >> lists.yoctoproject.org > >> [1 [1]] <[email protected]> wrote: > >> > >> I'm trying an experiment building yocto/OE on a Raspberry Pi 4 to > >> host on the same RP4. Admittedly, a not practical platform for > >> this > >> purpose but it should work. > >> > >> I'm trying to target the ARM ISA for the image using yocto-3.4.2. > >> I've tried simply using the default setting and end up with: > >> > >> _ERROR: OE-core's config sanity checker detected a potential > >> misconfiguration._ > >> _ Either fix the cause of this error or at your own risk > >> disable > >> the checker (see sanity.conf)._ > >> _ Following is the list of potential problems / advisories:_ > >> _ _ > >> _ Specified SDKMACHINE value is not valid_ > >> > >> I've tried editing ./conf/local.conf: > >> > >> MACHINE ?= "qemuarm64" > >> > >> #MACHINE ??= "qemux86-64" > >> > >> > >> It's complaining about SDKMACHINE setting which is a separate > >> variable, can you check your local.conf if it's set to something > >> > >> But this accomplishes nothing. Needless to say, I'm a yacto/OE > >> newbie, so any suggestions would be greatly appreciated. > > > > are you on a x86_64 host? Secondly try to uncomment SDKMACHINE setting > > in local.conf > > and see if it helps. Also check if your default shell is bash or dash. > > > >> > >> ---John > >> > >> > >> Links: > >> ------ > >> [1] http://lists.yoctoproject.org > >> > >> > >> > >> Links: > >> ------ > >> [1] http://lists.yoctoproject.org > >> > >> > >> > >> > >> > > -- > NULL
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#56645): https://lists.yoctoproject.org/g/yocto/message/56645 Mute This Topic: https://lists.yoctoproject.org/mt/90188098/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
