On Fri, Apr 1, 2022 at 2:02 PM jchludzinski <[email protected]> wrote:
>
> But obviously commented out.
>
> On 2022-04-01 16:43, jchludzinski via lists.yoctoproject.org wrote:
> > There's this:
> > #SDKMACHINE ?= "i686"

OK it should be ok then. Can you describe your steps to setup the system?
maybe there is some caveat

> >
> > ---John
> >
> > On 2022-04-01 16:22, Khem Raj wrote:
> >
> >> On Fri, Apr 1, 2022 at 1:09 PM jchludzinski via
> >> lists.yoctoproject.org
> >> [1 [1]] <[email protected]> wrote:
> >>
> >>> I'm trying an experiment building yocto/OE on a Raspberry Pi 4 to
> >>> host on the same RP4. Admittedly, a not practical platform for
> >>> this
> >>> purpose but it should work.
> >>>
> >>> I'm trying to target the ARM ISA for the image using yocto-3.4.2.
> >>> I've tried simply using the default setting and end up with:
> >>>
> >>> _ERROR:  OE-core's config sanity checker detected a potential
> >>> misconfiguration._
> >>> _    Either fix the cause of this error or at your own risk
> >>> disable
> >>> the checker (see sanity.conf)._
> >>> _    Following is the list of potential problems / advisories:_
> >>> _ _
> >>> _    Specified SDKMACHINE value is not valid_
> >>>
> >>> I've tried editing ./conf/local.conf:
> >>>
> >>> MACHINE ?= "qemuarm64"
> >>>
> >>> #MACHINE ??= "qemux86-64"
> >>
> >> It's complaining about SDKMACHINE setting which is a separate
> >> variable, can you check your local.conf if it's set to something
> >>
> >>> But this accomplishes nothing. Needless to say, I'm a yacto/OE
> >>> newbie, so any suggestions would be greatly appreciated.
> >>>
> >>> ---John
> >>
> >> Links:
> >> ------
> >> [1] http://lists.yoctoproject.org
> >
> >
> > Links:
> > ------
> > [1] http://lists.yoctoproject.org
> >
> > 
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#56618): https://lists.yoctoproject.org/g/yocto/message/56618
Mute This Topic: https://lists.yoctoproject.org/mt/90188098/21656
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub 
[[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

Reply via email to