Is Raspian 32- or 64-bit? We don't suppose 32-bit arm SDKs. As Khem said, set SDKMACHINE to i686 explicitly to avoid this. Note that compiling on a RPi4 is *very slow*.
Ross On Sat, 2 Apr 2022 at 17:37, jchludzinski via lists.yoctoproject.org <[email protected]> wrote: > > I’m actually trying this on an RP4 running Raspbian. > > On 2022-04-02 12:15, Khem Raj wrote: > > On Sat, Apr 2, 2022 at 1:47 AM jchludzinski <[email protected]> > > wrote: > >> > >> $ git clone git://git.yoctoproject.org/poky.git > >> $ cd ./poky > >> $ git checkout yocto-3.4.2 > >> $ cd .. > >> $ source ./poky/oe-init-build-env > >> $ cd ./build > >> $ time bitbake core-image-minimal > >> ... > >> ERROR: OE-core's config sanity checker detected a potential > >> misconfiguration. > >> Either fix the cause of this error or at your own risk disable the > >> checker (see sanity.conf). > >> Following is the list of potential problems / advisories: > >> > >> Specified SDKMACHINE value is not valid > >> > >> > >> Summary: There was 1 WARNING message shown. > >> Summary: There was 1 ERROR message shown, returning a non-zero exit > >> code. > >> > >> ________________________________________________________ > >> Executed in 3.92 secs fish external > >> usr time 1.07 secs 9.77 millis 1.06 secs > >> sys time 0.18 secs 2.96 millis 0.17 secs > >> > >> > >> > >> On 2022-04-01 18:09, Khem Raj wrote: > >> > >> On Fri, Apr 1, 2022 at 2:02 PM jchludzinski <[email protected]> > >> wrote: > >> > >> > >> But obviously commented out. > >> > >> On 2022-04-01 16:43, jchludzinski via lists.yoctoproject.org wrote: > >> > >> There's this: > >> #SDKMACHINE ?= "i686" > >> > >> > >> OK it should be ok then. Can you describe your steps to setup the > >> system? > >> maybe there is some caveat > >> > >> > >> ---John > >> > >> On 2022-04-01 16:22, Khem Raj wrote: > >> > >> On Fri, Apr 1, 2022 at 1:09 PM jchludzinski via > >> lists.yoctoproject.org > >> [1 [1]] <[email protected]> wrote: > >> > >> I'm trying an experiment building yocto/OE on a Raspberry Pi 4 to > >> host on the same RP4. Admittedly, a not practical platform for > >> this > >> purpose but it should work. > >> > >> I'm trying to target the ARM ISA for the image using yocto-3.4.2. > >> I've tried simply using the default setting and end up with: > >> > >> _ERROR: OE-core's config sanity checker detected a potential > >> misconfiguration._ > >> _ Either fix the cause of this error or at your own risk > >> disable > >> the checker (see sanity.conf)._ > >> _ Following is the list of potential problems / advisories:_ > >> _ _ > >> _ Specified SDKMACHINE value is not valid_ > >> > >> I've tried editing ./conf/local.conf: > >> > >> MACHINE ?= "qemuarm64" > >> > >> #MACHINE ??= "qemux86-64" > >> > >> > >> It's complaining about SDKMACHINE setting which is a separate > >> variable, can you check your local.conf if it's set to something > >> > >> But this accomplishes nothing. Needless to say, I'm a yacto/OE > >> newbie, so any suggestions would be greatly appreciated. > > > > are you on a x86_64 host? Secondly try to uncomment SDKMACHINE setting > > in local.conf > > and see if it helps. Also check if your default shell is bash or dash. > > > >> > >> ---John > >> > >> > >> Links: > >> ------ > >> [1] http://lists.yoctoproject.org > >> > >> > >> > >> Links: > >> ------ > >> [1] http://lists.yoctoproject.org > >> > >> > >> > >> > >> > > -- > NULL > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#56656): https://lists.yoctoproject.org/g/yocto/message/56656 Mute This Topic: https://lists.yoctoproject.org/mt/90188098/21656 Group Owner: [email protected] Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
