Hi Sachin, under /opt/poky, can you do the following in exact sequence: 1. source environment-setup-ppc603e-poky-linux 2. poky-qemy qemuppc zImage-2.6.34.qemuppc-0.9.bin yocto-image-minimal-qemuppc-0.9.rootfs.ext3 Thanks, Jessica
_____ From: [email protected] [mailto:[email protected]] On Behalf Of sachin kumar Sent: Thursday, November 11, 2010 8:19 AM To: Zhang, Jessica Cc: [email protected] Subject: Re: [yocto] Problem in running poky-qemu Hello Jessica: Thanks for your swift response, as per your suggestions i have downloaded yocto-eglibc-i586-powerpc-toolchain-sdk-0.9.tar.bz2 file from yocto website. I have installed the same. you can see now content of my /opt/poky folder as following [sac...@sachinlinux yocto_tools]$ ls /opt/poky/ environment-setup-i586-poky-linux site-config-i586-poky-linux sysroots version-ppc603e-poky-linux environment-setup-ppc603e-poky-linux site-config-ppc603e-poky-linux version-i586-poky-linux [sac...@sachinlinux yocto_tools]$ But despite that i am getting same message [sac...@sachinlinux yocto_tools]$ poky-qemu zImage-2.6.34-qemuppc-0.9.bin yocto-image-minimal-qemuppc-0.9.rootfs.ext3 Set MACHINE to [qemuppc-0] based on kernel [zImage-2.6.34-qemuppc-0.9.bin] In order for this script to dynamically infer paths to kernels or filesystem images, you either need bitbake in your PATH or to source poky-init-build-env before running this script [sac...@sachinlinux yocto_tools]$ I do not which script this is referring. Please help me. Kind regards Sachin On Thu, Nov 11, 2010 at 7:59 AM, Zhang, Jessica <[email protected]> wrote: Hi Sachin, First of all, if you want to run ppc, the toolchain you need to download is yocto-eglibc-i586-powerpc-toolchain-sdk-0.9.tar.bz2. After you install it under /opt/poky, you should go under /opt/poky and source the environment-setup-ppc* and try start qemu again... Let us know if you still run into issues. Thanks, Jessica _____ From: [email protected] [mailto:[email protected]] On Behalf Of sachin kumar Sent: Wednesday, November 10, 2010 6:09 PM To: [email protected] Subject: [yocto] Problem in running poky-qemu Dear All: I am new to qemu, so please excuse me, i am asking basic question. Actually i want to run linux image for ppc on qemu. My host machine is running Fedora13. For that i have downloaded following from yocto project website. Disk Image: yocto-image-minimal-qemuppc-0.9.rootfs.ext3 Kernel Image : zImage-2.6.34-qemuppc-0.9.bin Toolchain: yocto-eglibc-i586-i586-toolchain-sdk-0.9.tar.bz2 Now toolchain was installed properly. Now when i am running poky-qemu from command line it is giving following message ============================================================================ ================= [r...@sachinlinux yocto_tools]# poky-qemu zImage-2.6.34-qemuppc-0.9.bin yocto-image-minimal-qemuppc-0.9.rootfs.ext3 Set MACHINE to [qemuppc-0] based on kernel [zImage-2.6.34-qemuppc-0.9.bin] In order for this script to dynamically infer paths to kernels or filesystem images, you either need bitbake in your PATH or to source poky-init-build-env before running this script ============================================================================ ================= I am blank about this message, which script they are referring. Please help me for the same. This will be a great help for me as i am at critical phase of one of my project. Kind Regards Sachin
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ yocto mailing list [email protected] https://lists.yoctoproject.org/listinfo/yocto
