On 12/01/12 15:21, Brian Hutchinson wrote:
Yet another follow up. I finally found my C3 Beagleboard and the
default kernel built off master yesterday works on that platform too.
I was able to do another build with the tips you guys gave and it
looks like it is picking up the kernel from my local git repo now. I
did the "calibrate" example and while I couldn't see the printk's due
to the silent boot being turned on somehow, uname -a was different
than the default image .... mine is now:
root@beagleboard:~# uname -a
Linux beagleboard 3.0.14-yocto-standard+ #1 PREEMPT Thu Jan 12
08:45:10 EST 2012 armv7l GNU/Linux
And just for sanity, I made another copy of my bare clone and verified
that I pushed the "calibrate" changes correctly.
So it looks like I'm good now thanks to your help!
Do I have to do a cleanall every time I'm finished pushing changes
back to my local kernel repo?
Is there a document that gives clues as to how to setup a local u-boot
repo for making changes to it? Is is simply changing the u-boot
recipe SRC_URI to use my local u-boot git repo in
poky/meda/recipes-bsp/u-boot or is it more involved than that? Is
there a u-boot dev layer like the poky-extras/meta-kernel-dev?
Regards,
Brian
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Brian,
What image are you building, as I cannot get core-image-minimal to boot
at all on my xM. I am currently trying to fix a hosed sd card (who knows
what happened to it!) and then I will see if it has made any difference.
Cheers,
Jack.
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
