Hello zd1211 community, my first steps on the zd1211rw were pretty bad. showing dmesg at reboot shows why:
usb 1-4: device descriptor read/64, error -110 usb 1-4: device descriptor read/64, error -110 usb 1-4: new full speed USB device using ohci_hcd and address 3 usb 1-4: device descriptor read/64, error -110 usb 1-4: device descriptor read/64, error -110 usb 1-4: new full speed USB device using ohci_hcd and address 4 usb 1-4: device not accepting address 4, error -110 usb 1-4: new full speed USB device using ohci_hcd and address 5 usb 1-4: device not accepting address 5, error -110 usb 2-4: new full speed USB device using ohci_hcd and address 2 usb 2-4: new device found, idVendor=05a9, idProduct=a518 usb 2-4: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: USB Camera usb 2-4: Manufacturer: OmniVision Technologies, Inc. usb 2-4: configuration #1 chosen from 1 choice the driver hasn't even been loaded and the module usbcore/ohci-hcd shows several errors regarding my usb dongle. when i try to load the zd1211rw.ko manually, i get: ohci_hcd 0000:00:02.0: wakeup usb 1-4: new full speed USB device using ohci_hcd and address 6 usb 1-4: new device found, idVendor=0ace, idProduct=1211 usb 1-4: new device strings: Mfr=16, Product=32, SerialNumber=0 usb 1-4: Product: USB2.0 WLAN usb 1-4: Manufacturer: ZyDAS usb 1-4: configuration #1 chosen from 1 choice ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> usb_init() usb 1-4: print_id() 0ace:1211 v4810 full zd1211rw 1-4:1.0: zd_netdev_alloc() netdev->flags 0x1002 zd1211rw 1-4:1.0: zd_netdev_alloc() netdev->features 0x00000000 usb 1-4: request_fw_file() fw name zd1211/zd1211_ub usb 1-4: firmware device id 0x4330 and actual device id 0x4810 differ, continuing anyway usb 1-4: request_fw_file() fw name zd1211/zd1211_uphr firmware_loading_store: unexpected value (0) usb 1-4: Could not load firmware file zd1211/zd1211_uphr. Error number -2 zd1211rw 1-4:1.0: couldn't load firmware. Error number -2 usb 1-4: reset full speed USB device using ohci_hcd and address 6 zd1211rw: probe of 1-4:1.0 failed with error -2 usbcore: registered new driver zd1211rw zd1211rw initialized i took the snapshots from today (2006-06-07). lsusb tells me: Bus 002 Device 002: ID 05a9:a518 OmniVision Technologies, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 0ace:1211 Bus 001 Device 001: ID 0000:0000 perhaps some more useful information using the zd1211 driver module: Release Ver = 4810 zd1211:bulk out: wMaxPacketSize = 40 zd1211:bulk in: wMaxPacketSize = 40 zd1211:interrupt in: wMaxPacketSize = 40 zd1211:interrupt in: int_interval = 1 zd1211:bulk out: wMaxPacketSize = 40 EEPORM Ver = 4330 zd1211:USB Download Boot code success zd1211:MAC address = 00:11:e2:02:38:ef zd1211:AddrEntryTable = f7d4 zd1211:RF_Mode = 00000004 PA type: 0 AiroHa AL2230RF zd1211:Pure B-Mode so long, bye christian ___________________________________________________________ Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de _______________________________________________ Zd1211-devs mailing list - http://zd1211.ath.cx/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs