Hi Daniel,

2007/6/1, Daniel Drake <[EMAIL PROTECTED]>:
> > What is 'error -22'?
>
> -EINVAL
>
> Please compile with "make ZD1211_DEBUG=y" and post new output.

[EMAIL PROTECTED] zd1211rw-strange-al2230s]$ make zd1211_DEBUG=y
make -C /lib/modules/`uname -r`/build M=`pwd`
make[1]: Entering directory `/usr/src/kernels/2.6.20-1.2316.fc5-smp-i686'
  LD      
/home/zenkato/tools/net/zd1211/zd1211rw/strange/zd1211rw-strange-al2230s/built-in.o
  CC [M]  
/home/zenkato/tools/net/zd1211/zd1211rw/strange/zd1211rw-strange-al2230s/zd_netdev.o
...(snip)...

The output of /var/log/messages are:

Jun  1 12:09:44 p4c8 kernel: usb 5-4: USB disconnect, address 4
Jun  1 12:09:51 p4c8 kernel: usb 5-4: new high speed USB device using
ehci_hcd and address 6
Jun  1 12:09:51 p4c8 kernel: usb 5-4: configuration #1 chosen from 1 choice
Jun  1 12:09:51 p4c8 kernel: usb 5-4: reset high speed USB device
using ehci_hcd and address 6
Jun  1 12:09:51 p4c8 kernel: ZD1211B - http://zd1211.ath.cx/ - SVN_TRUNK
Jun  1 12:09:51 p4c8 kernel: Based on www.zydas.com.tw driver version 2.5.0.0
Jun  1 12:09:51 p4c8 kernel: zd1211rw 5-4:1.0: firmware version 4725
Jun  1 12:09:51 p4c8 kernel: zd1211rw 5-4:1.0: zd1211b chip 0411:00da
v4810 high 00-16-01 AL2230S_RF pa0 g--N-
Jun  1 12:09:51 p4c8 kernel: usb 5-4: reset high speed USB device
using ehci_hcd and address 6
Jun  1 12:09:51 p4c8 kernel: zd1211rw: probe of 5-4:1.0 failed with error -22
Jun  1 12:09:51 p4c8 kernel: usb 5-4: device_add(5-4:1.0) --> -22
Jun  1 12:09:51 p4c8 kernel: usbcore: registered new interface driver zd1211b
---------
I installed wifi-radar for checking whether zd1211rw use 'eth1' or not.
When I connect to my AP with wifi-radar, "eth1" of the screen of
system-config-network-1.3.30 comes up. So, I guess zd1211rw uses
"eth1" device,
but my eth1 is the second ethernet card not wireless device such as
WLI-U2-KG54L.

Regards,

Zen

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Zd1211-devs mailing list - http://zd1211.ath.cx/
Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs

Reply via email to