I'm having the same problem with the VM Zenoss 2.2.3 release. Only 9 interfaces on all the HP procurve switches. These are my results on MIB test:
Code: # snmpwalk -v2c -c gmdh-public xx.xx.xx.xx 1.3.6.1.2.1.2.2.1.1 IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifIndex.2 = INTEGER: 2 IF-MIB::ifIndex.3 = INTEGER: 3 IF-MIB::ifIndex.4 = INTEGER: 4 IF-MIB::ifIndex.5 = INTEGER: 5 IF-MIB::ifIndex.6 = INTEGER: 6 IF-MIB::ifIndex.7 = INTEGER: 7 IF-MIB::ifIndex.8 = INTEGER: 8 IF-MIB::ifIndex.9 = INTEGER: 9 IF-MIB::ifIndex.10 = INTEGER: 10 IF-MIB::ifIndex.11 = INTEGER: 11 IF-MIB::ifIndex.12 = INTEGER: 12 IF-MIB::ifIndex.13 = INTEGER: 13 IF-MIB::ifIndex.14 = INTEGER: 14 IF-MIB::ifIndex.15 = INTEGER: 15 IF-MIB::ifIndex.16 = INTEGER: 16 IF-MIB::ifIndex.17 = INTEGER: 17 IF-MIB::ifIndex.18 = INTEGER: 18 IF-MIB::ifIndex.19 = INTEGER: 19 IF-MIB::ifIndex.20 = INTEGER: 20 IF-MIB::ifIndex.21 = INTEGER: 21 IF-MIB::ifIndex.22 = INTEGER: 22 IF-MIB::ifIndex.23 = INTEGER: 23 IF-MIB::ifIndex.24 = INTEGER: 24 IF-MIB::ifIndex.99 = INTEGER: 99 IF-MIB::ifIndex.100 = INTEGER: 100 IF-MIB::ifIndex.101 = INTEGER: 101 IF-MIB::ifIndex.298 = INTEGER: 298 IF-MIB::ifIndex.4194 = INTEGER: 4194 Looks ok, remoddeling shows no errors. Could this be a problem with viewing integer values with more than 2 chars? Since more pleople experience this problem is there going to be a patch? -------------------- m2f -------------------- Read this topic online here: http://community.zenoss.com/forums/viewtopic.php?p=25026#25026 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
