I am working on a template for the Cisco Aironet 1310G Bridge. I am trying to pull the Signal Strength value from SNMP using
OID .1.3.6.1.4.1.9.9.273.1.3.1.1.3 When I create the data source and save it and then run the test against a device it successfully retrieves the expanded OID as well as the proper value. When zenperfsnmp runs it returns an event regarding "Error reading value" "oid is bad". an SNMP walk of that OID for each device returns the proper value but a GET returns an error. The expanded OID it returns with the test for at least one of the devices is SNMPv2-SMI::enterprises.9.9.273.1.3.1.1.3.1.26.53.57.54.102.52.98.55.57.50.101.55.57.52.56.54.101.53.98.53.48.54.52.55.53.50.53.0.22.199.219.217.144 Any help would be greatly appreciated as we have 14 of these devices to monitor in our network. Thanks. Luke Stackle, CCNA, CCNA Voice Director of IT Diocese of Boise [email protected] -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=33839#33839 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
