See: http://forums.zenoss.com/viewtopic.php?p=33842#33842 cluther suggested deleting the pickle file for what sounds like a similar issue: error unless test is run, then is OK for test.
Let us know if this works... -- James Pulver Information Technology Area Supervisor LEPP Computer Group Cornell University lstackle wrote, On 4/24/2009 5:22 PM: > I am working on a template for the Cisco Aironet 1310G Bridge. I am trying > to pull the Signal Strength value from SNMP using > > OID .1.3.6.1.4.1.9.9.273.1.3.1.1.3 > > When I create the data source and save it and then run the test against a > device it successfully retrieves the expanded OID as well as the proper > value. When zenperfsnmp runs it returns an event regarding "Error reading > value" "oid is bad". an SNMP walk of that OID for each device returns the > proper value but a GET returns an error. The expanded OID it returns with > the test for at least one of the devices is > > SNMPv2-SMI::enterprises.9.9.273.1.3.1.1.3.1.26.53.57.54.102.52.98.55.57.50.101.55.57.52.56.54.101.53.98.53.48.54.52.55.53.50.53.0.22.199.219.217.144 > > Any help would be greatly appreciated as we have 14 of these devices to > monitor in our network. Thanks. > > Luke Stackle, CCNA, CCNA Voice > Director of IT > Diocese of Boise > [email protected] > > > > > -------------------- m2f -------------------- > > Read this topic online here: > http://forums.zenoss.com/viewtopic.php?p=33839#33839 > > -------------------- m2f -------------------- > > > > _______________________________________________ > zenoss-users mailing list > [email protected] > http://lists.zenoss.org/mailman/listinfo/zenoss-users _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
