On Apr 24, 2009, at 5:22 PM, lstackle wrote: > I am working on a template for the Cisco Aironet 1310G Bridge. I am > trying to pull the Signal Strength value from SNMP using > > OID .1.3.6.1.4.1.9.9.273.1.3.1.1.3 > > When I create the data source and save it and then run the test > against a device it successfully retrieves the expanded OID as well > as the proper value. When zenperfsnmp runs it returns an event > regarding "Error reading value" "oid is bad". an SNMP walk of that > OID for each device returns the proper value but a GET returns an > error. The expanded OID it returns with the test for at least one > of the devices is > > SNMPv2-SMI::enterprises. > 9.9.273.1.3.1.1.3.1.26.53.57.54.102.52.98.55.57.50.101.55.57.52.56.54.101.53.98.53.48.54.52.55.53.50.53.0.22.199.219.217.144 > > Any help would be greatly appreciated as we have 14 of these devices > to monitor in our network. Thanks.
If all 14 of these devices return that exact same full OID when walked, you should enter it that way into the OID of the data source. The zenperfsnmp daemon performs an SNMP GET command, and requires the exact OID. It won't walk down the tree like the snmpwalk test command. _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
