HummerBoy wrote: > What frustrates me is people quoting that they have quad or eight core > machines. Zenoss doesn't use them! > I have an IBM x3650 8-core Xeon 2.5Ghz E5420, fibre connected to the SAN, and > 18Gb RAM. > I can allocate as many CPU's as I like (VMware) and it only uses one of them. > I have about 24k OID requests per cycle, disk writes peaking to anything up > to 25MBps but currently sitting at 36Kbps, and my CPU is averaging 71.52% > with the current (as I type this) sitting at 99.81% with 3 other available > cores sitting at zero.
Definitely follow what mwcotton said. You can add "workers X" to $ZENHOME/etc/zenhub.conf, where X represents the number of workers to run. I'm running 4 on an 8 core box. Chet has some good info here on determining how many to run. http://forums.zenoss.com/viewtopic.php?t=9429&highlight=zenhub+workers -------------------- m2f -------------------- Read this topic online here: http://forums.zenoss.com/viewtopic.php?p=36418#36418 -------------------- m2f -------------------- _______________________________________________ zenoss-users mailing list [email protected] http://lists.zenoss.org/mailman/listinfo/zenoss-users
