You have not mentioned if you have swapped the 3114 based HBA itself...? Have you tried a different HBA? :)
Nathan. Ed Saipetch wrote: > Hello, > > I'm experiencing major checksum errors when using a syba silicon image 3114 > based pci sata controller w/ nonraid firmware. I've tested by copying data > via sftp and smb. With everything I've swapped out, I can't fathom this > being a hardware problem. There have been quite a few blog posts out there > with people having a similar config and not having any problems. > > Here's what I've done so far: > 1. Changed solaris releases from S10 U3 to NV 75a > 2. Switched out motherboards and cpus from AMD sempron to a Celeron D > 3. Switched out memory to use completely different dimms > 4. Switched out sata drives (2-3 250gb hitachi's and seagates in RAIDZ, > 3x400GB seagates RAIDZ and 1x250GB hitachi with no raid) > > Here's output of a scrub and the status (ignore the date and time, I haven't > reset it on this new motherboard) and please point me in the right direction > if I'm barking up the wrong tree. > > # zpool scrub tank > # zpool status > pool: tank > state: ONLINE > status: One or more devices has experienced an error resulting in data > corruption. Applications may be affected. > action: Restore the file in question if possible. Otherwise restore the > entire pool from backup. > see: http://www.sun.com/msg/ZFS-8000-8A > scrub: scrub completed with 140 errors on Sat Sep 15 02:07:35 2007 > config: > > NAME STATE READ WRITE CKSUM > tank ONLINE 0 0 293 > c0d1 ONLINE 0 0 293 > > errors: 140 data errors, use '-v' for a list > > > This message posted from opensolaris.org > _______________________________________________ > zfs-discuss mailing list > zfs-discuss@opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/zfs-discuss _______________________________________________ zfs-discuss mailing list zfs-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/zfs-discuss
