Hi, On 3/8/06, Brian Sullivan <[EMAIL PROTECTED]> wrote: > I am in the process of testing an upgrade from a Zope 2.8.4 system to > a Zope 2.9.1 system. > > The process I used: > > 1) Install 2.9.1 on a Win2003 system (it happens to be the same one > that the 2.8.4 system is running but I changed the config so the ports > don't conflict). The installation is successful > > 2) Copy the Product directory from my functioning 2.8.4 system > instance to the 2.9.1 instance > > 3) copy the ZODB from the functioning 2.8.4 system to the 2.9.1 system > > All appears to go well -- the 2.9.1 system appears to be running > everything from the 2.8.4 system correctly. A deeper check though > shows that a few Python scripts in the ZODB (this in a system that has > 20 or 30 scripts) fail. Examining the scripts indicates an error at > line 3 -- but no such error can be found, however saving the script > with no changes eliminates the error and also causes the script to now > function. > > After finding and correcting these scripts everything seems to be working > well. > > Any idea what happened during the upgrade to cause this strange > behaviour and how can I avoid it? > > I will have to go through a similar upgrade at a customer's site and > would like to avoid hand checking every script if I can avoid it.
I had the same problem : Windows CR/LF line endings are not supported anymore for PythonScripts. According to Dieter Maurer, it has to do with Python 2.4 rather than Zope 2.9. Regards, Patrick. _______________________________________________ Zope maillist - Zope@zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )
