Bonjour, Grâce à votre mini-howto ALSA, j'ai pu effectuer divers tentatives de configuration mais sans succès...aussi je vous demande de l'aide pour configurer ma carte son sous Linux. => Dans la log, je vois que le gestionnaire USB s'attribue l'IRQ 5, il me semble que c'est l'IRQ habituelle de l'AWE32 ? => Faut-il que je recompile le noyau ? avec autres options... Merci de votre aide....
- OS : Mandrake 8.1, noyau 2.4.8-26 =============================================================== - Carte AWE 32 : modèle ISA =============================================================== - modules.conf et chargement : =============================================================== [root@localhost etc]# more modules.conf pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start alias usb-interface usb-uhci probeall scsi_hostadapter ide-scsi [root@localhost root]# lsmod Module Size Used by snd-sb16-dsp 15760 0 (unused) snd-pcm 31616 0 [snd-sb16-dsp] snd-timer 8528 0 [snd-pcm] snd-mixer 24544 0 [snd-sb16-dsp] snd 35248 0 [snd-sb16-dsp snd-pcm snd-timer snd-mixer] soundcore 4208 0 (autoclean) [snd] binfmt_misc 6208 1 lp 5808 0 parport_pc 20240 1 parport 24768 1 [lp parport_pc] af_packet 12560 0 (autoclean) ip_vs 62000 0 (autoclean) usb-uhci 21232 0 (unused) usbcore 50752 1 [usb-uhci] nls_iso8859-15 3408 3 (autoclean) nls_cp850 3632 3 (autoclean) vfat 9968 3 (autoclean) fat 32192 0 (autoclean) [vfat] ide-scsi 8096 0 scsi_mod 91072 1 [ide-scsi] rtc 5600 0 (autoclean) [root@localhost root]# amixer The ALSA sound driver was not detected in this system. [root@localhost root]# cat /proc/asound/cards --- no soundcards --- [root@localhost root]# - copy log dmesg : =============================================================== [root@localhost root]# dmesg | more Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96 20000731 (Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000018000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 98304 zone(0): 4096 pages. zone(1): 94208 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=linux ro root=2104 hdb=ide-scsi devfs=mount qu iet ide_setup: hdb=ide-scsi Initializing CPU#0 Detected 525.004 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1048.57 BogoMIPS Memory: 383776k/393216k available (1086k kernel code, 9052k reserved, 397k data, 71 2k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 05 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PnP: PNP BIOS installation structure at 0xc00fbfe0 PnP: PNP BIOS version 1.0, entry at f0000:c008, dseg at f0000 PnP: 14 devices detected total Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) Starting kswapd v1.8 VFS: Diskquotas version dquot_6.5.0 initialized devfs: v0.115 (20010827) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x1 vesafb: framebuffer at 0xe4000000, mapped to 0xd8800000, size 8192k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: protected mode interface info at c000:4785 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: queued sectors max/low 254514kB/123442kB, 768 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio HPT366: onboard version of chipset, pin1=1 pin2=2 HPT366: IDE controller on PCI bus 00 dev 98 PCI: Enabling device 00:13.0 (0005 -> 0007) PCI: Found IRQ 11 for device 00:13.0 PCI: Sharing IRQ 11 with 00:13.1 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:DMA, hdf:pio HPT366: IDE controller on PCI bus 00 dev 99 PCI: Found IRQ 11 for device 00:13.1 PCI: Sharing IRQ 11 with 00:13.0 HPT366: chipset revision 1 HPT366: not 100% native mode: will probe irqs later ide3: BM-DMA at 0xe800-0xe807, BIOS settings: hdg:DMA, hdh:pio hdb: TRAXDATA CDRW121032plus, ATAPI CD/DVD-ROM drive hde: ST38421A, ATA DISK drive hdg: QUANTUM FIREBALL1080A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide2 at 0xd400-0xd407,0xd802 on irq 11 ide3 at 0xe000-0xe007,0xe402 on irq 11 hde: 16498944 sectors (8447 MB) w/256KiB Cache, CHS=16368/16/63, UDMA(33) hdg: 2128896 sectors (1090 MB) w/83KiB Cache, CHS=2112/16/63, DMA ide-floppy driver 0.97 Partition check: /dev/ide/host2/bus0/target0/lun0: p1 p2 p3 p4 /dev/ide/host3/bus0/target0/lun0: p1 p2 < p5 > p3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ide-floppy driver 0.97 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 712k freed Real Time Clock Driver v1.10d Adding Swap: 130748k swap-space (priority -1) SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TRAXDATA Model: CDRW121032plus Rev: LSRA Type: CD-ROM ANSI SCSI revision: 02 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-15 MSDOS FS: Using codepage 850 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.259 $ time 17:30:17 Sep 23 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 5 for device 00:07.2 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.251:USB Universal Host Controller Interface driver PnPBIOS: Parport found PNPBIOS PNP0400 at io=0378,0000 irq=7 dma=-1 parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(00) parport0: assign_addrs: aa5500ff(00) parport0: cpp_daisy: aa5500ff(00) parport0: assign_addrs: aa5500ff(00) IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: ipvs loaded. PnPBIOS: Parport found PNPBIOS PNP0400 at io=0378,0000 irq=7 dma=-1 parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(00) parport0: assign_addrs: aa5500ff(00) parport0: cpp_daisy: aa5500ff(00) parport0: assign_addrs: aa5500ff(00) devfs: devfs_register(): device already registered: "0" lp0: using parport0 (interrupt-driven). devfs: devfs_mk_dir(): existing non-directory entry: "snd" devfs: existing non-directory entry devfs: devfs_register(): could not create entry: "snd/controlC0" devfs: existing non-directory entry devfs: devfs_register(): could not create entry: "snd/controlC1" devfs: existing non-directory entry devfs: devfs_register(): could not create entry: "snd/controlC2" devfs: existing non-directory entry devfs: devfs_register(): could not create entry: "snd/controlC3" devfs: existing non-directory entry devfs: devfs_register(): could not create entry: "snd/controlC4" devfs: existing non-directory entry devfs: devfs_register(): could not create entry: "snd/controlC5" devfs: existing non-directory entry devfs: devfs_register(): could not create entry: "snd/controlC6" devfs: existing non-directory entry devfs: devfs_register(): could not create entry: "snd/controlC7" devfs: existing non-directory entry devfs: existing non-directory entry devfs: existing non-directory entry devfs: existing non-directory entry devfs: existing non-directory entry devfs: existing non-directory entry devfs: existing non-directory entry devfs: existing non-directory entry _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel