[modules]
autoload = yes
noload = res_timing_pthread
noload = res_timing_timerfd
SO I "dont" want to load res_timing_anything ???
I have preload on res_timing_dahdi, then res_timing_pthread and not
res_timing_timerfd at all.
confbridge.conf is below
[general]
; The general section of this config
; is not currently used, but reserved
; for future use.
;
; --- Default Information ---
; The default_user and default_bridge sections are applied
; automatically to all ConfBridge instances invoked without
; a user, or bridge argument. No menu is applied by default.
;
; --- ConfBridge User Profile Options ---
[default_user]
type=user
;admin=yes ; Sets if the user is an admin or not. Off by default.
;marked=yes ; Sets if this is a marked user or not. Off by default.
;startmuted=yes; Sets if all users should start out muted. Off by default
;music_on_hold_when_empty=yes ; Sets whether MOH should be played when only
; one person is in the conference or
when the
; the user is waiting on a marked user
to enter
; the conference. Off by default.
;music_on_hold_class=default ; The MOH class to use for this user.
;quiet=yes ; When enabled enter/leave prompts and user intros are
not played.
; There are some prompts, such as the prompt to enter a
PIN number,
; that must be played regardless of what this option is
set to.
; Off by default
;announce_user_count=yes ; Sets if the number of users should be
announced to the
; caller. Off by default.
;announce_user_count_all=yes ; Sets if the number of users should be
announced to
; all the other users in the conference
when someone joins.
; This option can be either set to 'yes'
or a number.
; When set to a number, the announcement
will only occur
; once the user count is above the
specified number.
;announce_only_user=yes ; Sets if the only user announcement should be
played
; when a channel enters a empty conference.
On by default.
;wait_marked=yes ; Sets if the user must wait for a marked user to
enter before
; joining the conference. Off by default.
;end_marked=yes ; This option will kick every user with this option set
in their
; user profile after the last Marked user exists the
conference.
;dsp_drop_silence=yes ; This option drops what Asterisk detects as
silence from
; entering into the bridge. Enabling this
option will drastically
; improve performance and help remove the
buildup of background
; noise from the conference. Highly recommended
for large conferences
; due to its performance enhancements.
;dsp_talking_threshold=128 ; The time in milliseconds of sound above
what the dsp has
; established as base line silence for a
user before a user
; is considered to be talking. This value
affects several
; operations and should not be changed
unless the impact on
; call quality is fully understood.
;
; What this value affects internally:
;
; 1. Audio is only mixed out of a user's
incoming audio stream
; if talking is detected. If this value
is set too
; loose the user will hear themselves
briefly each
; time they begin talking until the dsp
has time to
; establish that they are in fact talking.
; 2. When talk detection AMI events are
enabled, this value
; determines when talking has begun
which results in
; an AMI event to fire. If this value
is set too tight
; AMI events may be falsely triggered by
variants in
; room noise.
; 3. The drop_silence option depends on
this value to determine
; when the user's audio should be mixed
into the bridge
; after periods of silence. If this
value is too loose
; the beginning of a user's speech will
get cut off as they
; transition from silence to talking.
;
; By default this value is 160 ms. Valid
values are 1 through 2^31
;dsp_silence_threshold=2000 ; The time in milliseconds of sound falling
within the what
; the dsp has established as baseline
silence before a user
; is considered be silent. This value
affects several
; operations and should not be changed
unless the impact
; on call quality is fully understood.
;
; What this value affects internally:
;
; 1. When talk detection AMI events are
enabled, this value
; determines when the user has stopped
talking after a
; period of talking. If this value is
set too low
; AMI events indicating the user has
stopped talking
; may get falsely sent out when the user
briefly pauses
; during mid sentence.
; 2. The drop_silence option depends on
this value to
; determine when the user's audio should
begin to be
; dropped from the conference bridge
after the user
; stops talking. If this value is set
too low the user's
; audio stream may sound choppy to the
other participants.
; This is caused by the user
transitioning constantly from
; silence to talking during mid sentence.
;
; The best way to approach this option is
to set it slightly above
; the maximum amount of ms of silence a
user may generate during
; natural speech.
;
; By default this value is 2500ms. Valid
values are 1 through 2^31
;talk_detection_events=yes ; This option sets whether or not
notifications of when a user
; begins and ends talking should be sent out
as events over AMI.
; By default this option is off.
;denoise=yes ; Sets whether or not a denoise filter should be applied
; to the audio before mixing or not. Off by default. Requires
; codec_speex to be built and installed. Do not confuse
this option
; with drop_silence. Denoise is useful if there is a lot
of background
; noise for a user as it attempts to remove the noise
while preserving
; the speech. This option does NOT remove silence from
being mixed into
; the conference and does come at the cost of a slight
performance hit.
;jitterbuffer=yes ; Enabling this option places a jitterbuffer on the
user's audio stream
; before audio mixing is performed. This is highly
recommended but will
; add a slight delay to the audio. This option is
using the JITTERBUFFER
; dialplan function's default adaptive
jitterbuffer. For a more fine tuned
; jitterbuffer, disable this option and use the
JITTERBUFFER dialplan function
; on the user before entering the ConfBridge
application.
;pin=1234 ; Sets if this user must enter a PIN number before entering
; the conference. The PIN will be prompted for.
;announce_join_leave=yes ; When enabled, this option will prompt the
user for a
; name when entering the conference. After
the name is
; recorded, it will be played as the user
enters and exists
; the conference. This option is off by default.
;dtmf_passthrough=yes ; Sets whether or not DTMF should pass through
the conference.
; This option is off by default.
; --- ConfBridge Bridge Profile Options ---
[default_bridge]
type=bridge
;max_members=50 ; This option limits the number of
participants for a single
; conference to a specific number. By
default conferences
; have no participant limit. After the
limit is reached, the
; conference will be locked until
someone leaves. Note however
; that an Admin user will always be
alowed to join the conference
; regardless if this limit is reached or
not.
;record_conference=yes ; Records the conference call starting
when the first user
; enters the room, and ending when the
last user exits the room.
; The default recorded filename is
; 'confbridge-<name of conference
bridge>-<start time>.wav
; and the default format is 8khz
slinear. This file will be
; located in the configured monitoring
directory in asterisk.conf.
;record_file=</path/to/file> ; When record_conference is set to yes,
the specific name of the
; record file can be set using this
option. Note that since multiple
; conferences may use the same bridge
profile, this may cause issues
; depending on the configuration. It is
recommended to only use this
; option dynamically with the
CONFBRIDGE() dialplan function. This
; allows the record name to be specified
and a unique name to be chosen.
; By default, the record_file is stored
in Asterisk's spool/monitor directory
; with a unique filename starting with
the 'confbridge' prefix.
;internal_sample_rate=auto ; Sets the internal native sample rate the
; conference is mixed at. This is set
to automatically
; adjust the sample rate to the best
quality by default.
; Other values can be anything from
8000-192000. If a
; sample rate is set that Asterisk does
not support, the
; closest sample rate Asterisk does
support to the one requested
; will be used.
;mixing_interval=40 ; Sets the internal mixing interval in
milliseconds for the bridge. This
; number reflects how tight or loose the mixing
will be for the conference.
; In order to improve performance a larger
mixing interval such as 40ms may
; be chosen. Using a larger mixing interval
comes at the cost of introducing
; larger amounts of delay into the bridge.
Valid values here are 10, 20, 40,
; or 80. By default 20ms is used.
;video_mode = follow_talker; Sets how confbridge handles video
distribution to the conference participants.
; Note that participants wanting to view and
be the source of a video feed
; _MUST_ be sharing the same video codec.
Also, using video in conjunction with
; with the jitterbuffer currently results in
the audio being slightly out of sync
; with the video. This is a result of the
jitterbuffer only working on the audio
; stream. It is recommended to disable the
jitterbuffer when video is used.
;
; --- MODES ---
; none: No video sources are set by default
in the conference. It is still
; possible for a user to be set as a
video source via AMI or DTMF action
; at any time.
;
; follow_talker: The video feed will follow
whoever is talking and providing video.
;
; last_marked: The last marked user to join
the conference with video capabilities
; will be the single source of
video distributed to all participants.
; If multiple marked users are
capable of video, the last one to join
; is always the source, when
that user leaves it goes to the one who
; joined before them.
;
; first_marked: The first marked user to
join the conference with video capabilities
; is the single source of
video distribution among all participants. If
; that user leaves, the marked
user to join after them becomes the source.
; All sounds in the conference are customizable using the bridge profile
options below.
; Simply state the option followed by the filename or full path of the
filename after
; the option. Example: sound_had_joined=conf-hasjoin This will play
the conf-hasjoin
; sound file found in the sounds directory when announcing someone's
name is joining the
; conference.
;sound_join ; The sound played to everyone when someone enters the
conference.
;sound_leave ; The sound played to everyone when someone leaves the
conference.
;sound_has_joined ; The sound played before announcing someone's name has
; joined the conference. This is used for user intros.
; Example "_____ has joined the conference"
;sound_has_left ; The sound played when announcing someone's name has
; left the conference. This is used for user intros.
; Example "_____ has left the conference"
;sound_kicked ; The sound played to a user who has been kicked from the
conference.
;sound_muted ; The sound played when the mute option it toggled on.
;sound_unmuted ; The sound played when the mute option it toggled off.
;sound_only_person ; The sound played when the user is the only person
in the conference.
;sound_only_one ; The sound played to a user when there is only one other
; person is in the conference.
;sound_there_are ; The sound played when announcing how many users there
; are in a conference.
;sound_other_in_party; ; This file is used in conjunction with
'sound_there_are"
; when announcing how many users there are in
the conference.
; The sounds are stringed together like this.
; "sound_there_are" <number of participants>
"sound_other_in_party"
;sound_place_into_conference ; The sound played when someone is placed
into the conference
; after waiting for a marked user.
;sound_wait_for_leader ; The sound played when a user is placed into a
conference that
; can not start until a marked user enters.
;sound_leader_has_left ; The sound played when the last marked user
leaves the conference.
;sound_get_pin ; The sound played when prompting for a conference pin
number.
;sound_invalid_pin ; The sound played when an invalid pin is entered too
many times.
;sound_locked ; The sound played to a user trying to join a locked
conference.
;sound_locked_now ; The sound played to an admin after toggling the
conference to locked mode.
;sound_unlocked_now; The sound played to an admin after toggling the
conference to unlocked mode.
;sound_error_menu ; The sound played when an invalid menu option is entered.
[broadcastBridge]
type=bridge
video_mode=first_marked
;video_mode=sfu; Sets how confbridge handles video distribution to the
conference participants.
; Note that participants wanting to view and
be the source of a video feed
; _MUST_ be sharing the same video codec.
Also, using video in conjunction with
; with the jitterbuffer currently results in
the audio being slightly out of sync
; with the video. This is a result of the
jitterbuffer only working on the audio
; stream. It is recommended to disable the
jitterbuffer when video is used.
;
; --- MODES ---
; none: No video sources are set by default
in the conference. It is still
; possible for a user to be set as a
video source via AMI or DTMF action
; at any time.
;
; follow_talker: The video feed will follow
whoever is talking and providing video.
;
; last_marked: The last marked user to join
the conference with video capabilities
; will be the single source of
video distributed to all participants.
; If multiple marked users are
capable of video, the last one to join
; is always the source, when
that user leaves it goes to the one who
; joined before them.
;
; first_marked: The first marked user to
join the conference with video capabilities
; is the single source of
video distribution among all participants. If
; that user leaves, the marked
user to join after them becomes the source.
; All sounds in the conference are customizable using the bridge profile
options below.
; Simply state the option followed by the filename or full path of the
filename after
; the option. Example: sound_had_joined=conf-hasjoin This will play
the conf-hasjoin
; sound file found in the sounds directory when announcing someone's
name is joining the
; conference.
;sound_join ; The sound played to everyone when someone enters the
conference.
;sound_leave ; The sound played to everyone when someone leaves the
conference.
;sound_has_joined ; The sound played before announcing someone's name has
; joined the conference. This is used for user intros.
; Example "_____ has joined the conference"
;sound_has_left ; The sound played when announcing someone's name has
; left the conference. This is used for user intros.
; Example "_____ has left the conference"
;sound_kicked ; The sound played to a user who has been kicked from the
conference.
;sound_muted ; The sound played when the mute option it toggled on.
;sound_unmuted ; The sound played when the mute option it toggled off.
;sound_only_person ; The sound played when the user is the only person
in the conference.
;sound_only_one ; The sound played to a user when there is only one other
; person is in the conference.
;sound_there_are ; The sound played when announcing how many users there
; are in a conference.
;sound_other_in_party; ; This file is used in conjunction with
'sound_there_are"
; when announcing how many users there are in
the conference.
; The sounds are stringed together like this.
; "sound_there_are" <number of participants>
"sound_other_in_party"
;sound_place_into_conference ; The sound played when someone is placed
into the conference
; after waiting for a marked user.
;sound_wait_for_leader ; The sound played when a user is placed into a
conference that
; can not start until a marked user enters.
;sound_leader_has_left ; The sound played when the last marked user
leaves the conference.
;sound_get_pin ; The sound played when prompting for a conference pin
number.
;sound_invalid_pin ; The sound played when an invalid pin is entered too
many times.
;sound_locked ; The sound played to a user trying to join a locked
conference.
;sound_locked_now ; The sound played to an admin after toggling the
conference to locked mode.
;sound_unlocked_now; The sound played to an admin after toggling the
conference to unlocked mode.
;sound_error_menu ; The sound played when an invalid menu option is entered.
; --- ConfBridge Menu Options ---
; The ConfBridge application also has the ability to
; apply custom DTMF menus to each channel using the
; application. Like the User and Bridge profiles
; a menu is passed in to ConfBridge as an argument in
; the dialplan.
;
; Below is a list of menu actions that can be assigned
; to a DTMF sequence.
;
; A single DTMF sequence can have multiple actions associated with it.
This is
; accomplished by stringing the actions together and using a ',' as the
delimiter.
; Example: Both listening and talking volume is reset when '5' is pressed.
; 5=reset_talking_volume, reset_listening_volume
;
; playback(<name of audio file>&<name of audio file>)
; Playback will play back an
audio file to a channel
; and then immediately return to
the conference.
; This file can not be
interupted by DTMF.
; Mutliple files can be chained
together using the
; '&' character.
; playback_and_continue(<name of playback prompt>&<name of playback prompt>)
; playback_and_continue will
; play back a prompt while
continuing to
; collect the dtmf sequence.
This is useful
; when using a menu prompt that
describes all
; the menu options. Note
however that any DTMF
; during this action will
terminate the prompts
; playback. Prompt files can be
chained together
; using the '&' character as a
delimiter.
; toggle_mute ; Toggle turning on and off mute. Mute will make the
user silent
; to everyone else, but the user will still be able
to listen in.
; continue to collect the dtmf sequence.
; no_op ; This action does nothing (No Operation). Its only real purpose
exists for
; being able to reserve a sequence in the config as a menu exit
sequence.
; decrease_listening_volume ; Decreases the channel's listening volume.
; increase_listening_volume ; Increases the channel's listening volume.
; reset_listening_volume ; Reset channel's listening volume to
default level.
; decrease_talking_volume ; Decreases the channel's talking volume.
; increase_talking_volume ; Icreases the channel's talking volume.
; reset_talking_volume ; Reset channel's talking volume to default level.
;
; dialplan_exec(context,exten,priority) ; The dialplan_exec action
allows a user
; to escape from the
conference and execute
; commands in the dialplan.
Once the dialplan
; exits the user will be put
back into the
; conference. The
possibilities are endless!
; leave_conference ; This action allows a user to exit the conference
and continue
; execution in the dialplan.
;
; admin_kick_last ; This action allows an Admin to kick the last
participant from the
; conference. This action will only work for admins
which allows
; a single menu to be used for both users and admins.
;
; admin_toggle_conference_lock ; This action allows an Admin to toggle
locking and
; unlocking the conference. Non admins
can not use
; this action even if it is in their menu.
; set_as_single_video_src ; This action allows any user to set
themselves as the
; single video source distributed to all
participants.
; This will make the video feed stick to
them regardless
; of what the video_mode is set to.
; release_as_single_video_src ; This action allows a user to release
themselves as
; the video source. If video_mode is not
set to "none"
; this action will result in the
conference returning to
; whatever video mode the bridge profile
is using.
;
; Note that this action will have no
effect if the user
; is not currently the video source.
Also, the user is
; not guaranteed by using this action
that they will not
; become the video source again. The
bridge will return
; to whatever operation the video_mode
option is set to
; upon release of the video src.
[sample_user_menu]
type=menu
*=playback_and_continue(conf-usermenu)
*1=toggle_mute
1=toggle_mute
*4=decrease_listening_volume
4=decrease_listening_volume
*6=increase_listening_volume
6=increase_listening_volume
*7=decrease_talking_volume
7=decrease_talking_volume
*8=leave_conference
8=leave_conference
*9=increase_talking_volume
9=increase_talking_volume
[sample_admin_menu]
type=menu
*=playback_and_continue(conf-adminmenu)
*1=toggle_mute
1=toggle_mute
*2=admin_toggle_conference_lock ; only applied to admin users
2=admin_toggle_conference_lock ; only applied to admin users
*3=admin_kick_last ; only applied to admin users
3=admin_kick_last ; only applied to admin users
*4=decrease_listening_volume
4=decrease_listening_volume
*6=increase_listening_volume
6=increase_listening_volume
*7=decrease_talking_volume
7=decrease_talking_volume
*8=no_op
8=no_op
*9=increase_talking_volume
9=increase_talking_volume
[LSIConfBridge]
type=bridge
record_conference=no
sound_only_person=none
sound_only_one=none
sound_join=none
sound_leave=none
sound_has_joined=none
sound_join=none
sound_has_left=none
sound_kicked=none
sound_muted=none
sound_unmuted=none
sound_only_person=none
sound_only_one=none
sound_there_are=none
sound_other_in_party=none
sound_place_into_conference=none
sound_wait_for_leader=none
sound_leader_has_left=none
sound_get_pin=none
sound_invalid_pin=none
sound_locked=none
sound_locked_now=none
sound_unlocked_now=none
sound_error_menu=none
[LSIBroadcaster]
type=user
marked=yes
quiet=yes
announce_only_user=no
announce_user_count_all=no
announce_join_leave=no
[LSIBroadcastee]
type=user
quiet=yes
end_marked=yes
startmuted=yes
announce_only_user=no
announce_user_count_all=no
announce_join_leave=no
[LSIConfUser]
type=user
marked=yes
quiet=yes
announce_only_user=no
announce_user_count_all=no
announce_join_leave=no
[LSIConfUserMuted]
type=user
quiet=yes
startmuted=yes
announce_only_user=no
announce_user_count_all=no
announce_join_leave=no
